Date: Wed, 18 Oct 2006 15:05:44 +0300 From: Nikolay Pavlov <quetzal@zone3000.net> To: Andriy Gapon <avg@icyb.net.ua> Cc: freebsd-stable@freebsd.org, freebsd-hardware@freebsd.org Subject: Re: nfsmb survey Message-ID: <20061018120544.GA5966@zone3000.net> In-Reply-To: <4533BE2E.4080005@icyb.net.ua> References: <4533BE2E.4080005@icyb.net.ua>
next in thread | previous in thread | raw e-mail | index | archive | help
On Monday, 16 October 2006 at 20:15:26 +0300, Andriy Gapon wrote: > > In STABLE and upcoming 6.2 (and in CURRENT, of course) there is a new > SMB driver for NForce2/3/4 chipsets, nfsmb, developed by Ruslan Ermilov. > However, the driver doesn't currently work on all hardware that it is to > support. The problem is with choosing proper BAR registers, which, as it > seems, might be different for different chipsets/SMB controllers. > > If you have a system based on NForce2/3/4, could you please share the > following information: > > 1. find out pci handle of your SMB controller: > $ pciconf -l | fgrep 0x0c0500 > and also note chip field value, it should match 00(64|84|d4|e4|52)10de. > E.g.: > nfsmb0@pci0:1:1: class=0x0c0500 card=0x1c02147b chip=0x006410de > rev=0xa2 hdr=0x00 > > 2. read values in BARs 4 and 5 and also registers 0x50 and 0x54 like > follows: > $ pciconf -r pci0:1:1 0x20 > $ pciconf -r pci0:1:1 0x24 > $ pciconf -r pci0:1:1 0x50 > $ pciconf -r pci0:1:1 0x54 > using your pci handle instead of pci0:1:1, e.g.: > $ pciconf -r pci0:1:1 0x20 > 00000000 > $ pciconf -r pci0:1:1 0x24 > 00000000 > $ pciconf -r pci0:1:1 0x50 > 00001001 > $ pciconf -r pci0:1:1 0x54 > 00001041 > > 3. send chip id and register values here. > > Thank you very much in advance. > > -- > Andriy Gapon > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" root@viking:~# pciconf -l | fgrep 0x0c0500 none0@pci0:1:1: class=0x0c0500 card=0x813f1043 chip=0x00e410de rev=0xa1 hdr=0x00 root@viking:~# pciconf -r pci0:1:1 0x20 00005001 root@viking:~# pciconf -r pci0:1:1 0x24 00005041 root@viking:~# pciconf -r pci0:1:1 0x50 00005001 root@viking:~# pciconf -r pci0:1:1 0x54 00005041 -- ====================================================================== - Best regards, Nikolay Pavlov. <<<----------------------------------- ======================================================================
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20061018120544.GA5966>