Date: Thu, 22 Mar 2007 19:35:13 -0700 From: David Wolfskill <david@catwhisker.org> To: current@freebsd.org Subject: Re: no network access on today's CURRENT Message-ID: <20070323023513.GO39764@bunrab.catwhisker.org> In-Reply-To: <20070322221341.GN39764@bunrab.catwhisker.org> References: <46025922.4090809@vlink.ru> <790a9fff0703220825g69405b89j123f7be87fadcb10@mail.gmail.com> <4602B42D.5060102@FreeBSD.org> <4602C23F.3060400@FreeBSD.org> <20070322190129.GL39764@bunrab.catwhisker.org> <4602D3CC.1010802@FreeBSD.org> <20070322221341.GN39764@bunrab.catwhisker.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--f9b3biUB1f7FHqGn Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Thu, Mar 22, 2007 at 03:13:41PM -0700, David Wolfskill wrote: > ... > Following up on Bruce's suggestion, then, I reverted the files that > appeared most likely to be involved to 20 Mar 2007 03:00 (US/Pacific; > currently 7 hrs. west of UTC) and re-built the kernel. >=20 > A reboot following that exercise yields a functioning wi0: >...=20 > Here's a list of the files I reverted (pruned from a list of files that > were updated in yesterday's build process), together with the revision > level I'm using & the current revision level: I was able to trim the list by some experimenting: =20 > File wi0 OK no wi0 > sys/dev/acpica/acpi.c 1.231 1.233 > sys/i386/bios/smapi.c 1.13 1.14 > sys/i386/bios/smbios.c 1.5 1.6 > sys/i386/bios/vpd.c 1.5 1.6 > sys/i386/i386/legacy.c 1.61 1.62 > sys/i386/i386/nexus.c 1.69 1.71 >... So: the above set of changes makes the difference between my wi0 device being seen (or not) during kernel probes. The probe messages from this latest (successful) boot related to the wi0 device are: ata0-slave: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA33 cable=3D40 wire pcib2: pccard2 requested memory range 0xf4000000-0xfbffffff: good pccard2: CIS version PC Card Standard 5.0 pccard2: CIS info: Dell, TrueMobile 1150 Series PC Card, Version 01.01,=20 pccard2: Manufacturer code 0x156, product 0x2 pccard2: function 0: network adapter, ccr addr 3e0 mask 1 pccard2: function 0, config table entry 1: I/O card; irq mask ffff; iomask = 6, iospace 0-3f; io16 irqpulse irqlevel pcib2: pccard2 requested I/O range 0xe000-0xffff: in range pcib2: pccard2 requested memory range 0xf4000000-0xfbffffff: good wi0: <Dell TrueMobile 1150 Series PC Card> at port 0xe000-0xe03f irq 11 fun= ction 0 config 1 on pccard2 wi0: [MPSAFE] wi0: [ITHREAD] wi0: using Lucent Embedded WaveLAN/IEEE wi0: Lucent Firmware: Station (6.14.1) wi0: bpf attached wi0: Ethernet address: 00:02:2d:5b:2c:78 wi0: bpf attached wi0: bpf attached wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ata0-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA100 cable=3D80 wire The corresponding messages from a boot that fails to see wi0: ata0-slave: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA33 cable=3D40 wire pcib2: pccard2 requested memory range 0xf4000000-0xfbffffff: good cbb2: set_res_flags: specified resource not active CIS is too long -- truncating cbb2: set_res_flags: specified resource not active pccard2: Card has no functions! cbb2: PC Card card activation failed ata0-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA100 cable=3D80 wire Thanks for suggestions; still willing to test. Peace, david --=20 David H. Wolfskill david@catwhisker.org Believe SORBS at your own risk: 63.193.123.122 has been static since Aug 19= 99. See http://www.catwhisker.org/~david/publickey.gpg for my public key. --f9b3biUB1f7FHqGn Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.0 (FreeBSD) iEYEARECAAYFAkYDPOAACgkQmprOCmdXAD2kfQCghscnZoNstC7AI38z9EPB7zch ZFcAnRdkZE8jrnb65qq9q7P8DCLmQxXn =jNwU -----END PGP SIGNATURE----- --f9b3biUB1f7FHqGn--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070323023513.GO39764>