Date: Tue, 05 Aug 2008 16:26:31 +0100 From: Bill Petheram <billp@menitech.co.uk> To: freebsd-acpi@freebsd.org Subject: /dev/psm0 mouse device not created Message-ID: <48987127.5080902@menitech.co.uk>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------040504090904000406040409
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Hi,
I am running FreeBSD 7.0 - RELEASE on an Abit IP35 Pro motherboard, a
Phoenix Award BIOS, a JMicron V01.06.69 message is also displayed. but
I am unable to get the mouse working. I keep getting:-
psm0: unable to allocate IRQ
Any help gratefully received.
If I try to boot without ACPI no disks are found.
thanks
Bill
Here is output from sysctl hw.acpi
hw.acpi.supported_sleep_state: S3 S4 S5
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S3
hw.acpi.lid_switch_state: NONE
hw.acpi.standby_state: S1
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 1
hw.acpi.s4bios: 0
hw.acpi.verbose: 1
hw.acpi.disable_on_reboot: 0
hw.acpi.handle_reboot: 0
hw.acpi.cpu.cx_lowest: C1
hw.acpi.thermal.min_runtime: 0
hw.acpi.thermal.polling_rate: 10
hw.acpi.thermal.user_override: 0
hw.acpi.thermal.tz0.temperature: -273.2C
hw.acpi.thermal.tz0.active: -1
hw.acpi.thermal.tz0.passive_cooling: 1
hw.acpi.thermal.tz0.thermal_flags: 0
hw.acpi.thermal.tz0._PSV: 75.0C
hw.acpi.thermal.tz0._HOT: -1
hw.acpi.thermal.tz0._CRT: 85.0C
hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
Here is /var/run/dmesg.boot. I used boot -v
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #0: Sun Feb 24 10:35:36 UTC 2008
root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80bc8000.
Calibrating clock(s) ... i8254 clock: 1193341 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 3204012006 Hz
CPU: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (3204.01-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x6fb Stepping = 11
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 4
usable memory = 2133549056 (2034 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000000cc5000 - 0x000000007c297fff, 2069704704 bytes (505299 pages)
avail memory = 2058874880 (1963 MB)
ACPI APIC Table: <IntelR AWRDACPI>
INTR: Adding local APIC 1 as a target
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 3 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 3
APIC: CPU 2 has ACPI ID 1
APIC: CPU 3 has ACPI ID 2
ACPI: RSDP @ 0x0xf7860/0x0014 (v 0 IntelR)
ACPI: RSDT @ 0x0x7fee3000/0x0034 (v 1 IntelR AWRDACPI 0x42302E31 AWRD 0x00000000)
ACPI: FACP @ 0x0x7fee3080/0x0074 (v 1 IntelR AWRDACPI 0x42302E31 AWRD 0x00000000)
ACPI: DSDT @ 0x0x7fee3100/0x4D0B (v 1 INTELR AWRDACPI 0x00001000 MSFT 0x03000000)
ACPI: FACS @ 0x0x7fee0000/0x0040
ACPI: MCFG @ 0x0x7fee7f00/0x003C (v 1 IntelR AWRDACPI 0x42302E31 AWRD 0x00000000)
ACPI: APIC @ 0x0x7fee7e40/0x0084 (v 1 IntelR AWRDACPI 0x42302E31 AWRD 0x00000000)
ACPI: SSDT @ 0x0x7fee8860/0x0380 (v 1 PmRef CpuPm 0x00003000 INTL 0x20041203)
MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 4
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic2: Routing NMI -> LINT1
lapic2: LINT1 trigger: edge
lapic2: LINT1 polarity: high
lapic3: Routing NMI -> LINT1
lapic3: LINT1 trigger: edge
lapic3: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x0f000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
io: <I/O>
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 10:34:18)
acpi0: <IntelR AWRDACPI> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
AcpiOsDerivePciId: \\_SB_.PCI0.PEX4.JMB0.CF40 -> bus 3 dev 0 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.PX40.PIRQ -> bus 0 dev 31 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.PX40.PIR2 -> bus 0 dev 31 func 0
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7fde0000 (3) failed
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 4 5 7 9 10 11 12
Validation 0 10 N 0 4 5 7 9 10 11 12
After Disable 0 255 N 0 4 5 7 9 10 11 12
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 5 7 9 10 11 12
Validation 0 255 N 0 4 5 7 9 10 11 12
After Disable 0 255 N 0 4 5 7 9 10 11 12
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 4 5 7 9 10 11 12
Validation 0 11 N 0 4 5 7 9 10 11 12
After Disable 0 255 N 0 4 5 7 9 10 11 12
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 4 5 7 9 10 11 12
Validation 0 11 N 0 4 5 7 9 10 11 12
After Disable 0 255 N 0 4 5 7 9 10 11 12
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 5 7 9 10 11 12
Validation 0 255 N 0 4 5 7 9 10 11 12
After Disable 0 255 N 0 4 5 7 9 10 11 12
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 4 N 0 4 5 7 9 10 11 12
Validation 0 4 N 0 4 5 7 9 10 11 12
After Disable 0 255 N 0 4 5 7 9 10 11 12
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 4 5 7 9 10 11 12
Validation 0 5 N 0 4 5 7 9 10 11 12
After Disable 0 255 N 0 4 5 7 9 10 11 12
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 4 5 7 9 10 11 12
Validation 0 7 N 0 4 5 7 9 10 11 12
After Disable 0 255 N 0 4 5 7 9 10 11 12
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 924092406000924
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 924092406000924
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 924092406000924
device_attach: est2 attach returned 6
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 924092406000924
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x29c0, revid=0x02
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x29c1, revid=0x02
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2937, revid=0x02
domain=0, bus=0, slot=26, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
map[20]: type I/O Port, range 32, base 0xff00, size 5, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2938, revid=0x02
domain=0, bus=0, slot=26, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=4
map[20]: type I/O Port, range 32, base 0xfe00, size 5, enabled
pcib0: matched entry for 0.26.INTB
pcib0: slot 26 INTB hardwired to IRQ 21
found-> vendor=0x8086, dev=0x2939, revid=0x02
domain=0, bus=0, slot=26, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
map[20]: type I/O Port, range 32, base 0xfd00, size 5, enabled
pcib0: matched entry for 0.26.INTD
pcib0: slot 26 INTD hardwired to IRQ 19
found-> vendor=0x8086, dev=0x293c, revid=0x02
domain=0, bus=0, slot=26, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfdfff000, size 10, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x293e, revid=0x02
domain=0, bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xfdff8000, size 14, enabled
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 22
found-> vendor=0x8086, dev=0x2940, revid=0x02
domain=0, bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
found-> vendor=0x8086, dev=0x2948, revid=0x02
domain=0, bus=0, slot=28, func=4
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
found-> vendor=0x8086, dev=0x2934, revid=0x02
domain=0, bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
map[20]: type I/O Port, range 32, base 0xfc00, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x2935, revid=0x02
domain=0, bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[20]: type I/O Port, range 32, base 0xfb00, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x2936, revid=0x02
domain=0, bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
map[20]: type I/O Port, range 32, base 0xfa00, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x293a, revid=0x02
domain=0, bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfdffe000, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x244e, revid=0x92
domain=0, bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2916, revid=0x02
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2920, revid=0x02
domain=0, bus=0, slot=31, func=2
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x02b8, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xf900, size 3, enabled
map[14]: type I/O Port, range 32, base 0xf800, size 2, enabled
map[18]: type I/O Port, range 32, base 0xf700, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xf600, size 2, enabled
map[20]: type I/O Port, range 32, base 0xf500, size 4, enabled
map[24]: type I/O Port, range 32, base 0xf400, size 4, enabled
pcib0: matched entry for 0.31.INTA
pcib0: slot 31 INTA hardwired to IRQ 19
found-> vendor=0x8086, dev=0x2930, revid=0x02
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[10]: type Memory, range 64, base 0xfdffd000, size 8, enabled
map[20]: type I/O Port, range 32, base 0x500, size 5, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 18
found-> vendor=0x8086, dev=0x2926, revid=0x02
domain=0, bus=0, slot=31, func=5
class=01-01-85, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xf200, size 3, enabled
map[14]: type I/O Port, range 32, base 0xf100, size 2, enabled
map[18]: type I/O Port, range 32, base 0xf000, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xef00, size 2, enabled
map[20]: type I/O Port, range 32, base 0xee00, size 4, enabled
map[24]: type I/O Port, range 32, base 0xed00, size 4, enabled
pcib0: matched entry for 0.31.INTA
pcib0: slot 31 INTA hardwired to IRQ 19
pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xa000-0xafff
pcib1: memory decode 0xf8000000-0xfbffffff
pcib1: prefetched decode 0xd0000000-0xdfffffff
pci1: <PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x10de, dev=0x0611, revid=0xa2
domain=0, bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xfa000000, size 24, enabled
pcib1: requested memory range 0xfa000000-0xfaffffff: good
map[14]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled
pcib1: requested memory range 0xd0000000-0xdfffffff: good
map[1c]: type Memory, range 64, base 0xf8000000, size 25, enabled
pcib1: requested memory range 0xf8000000-0xf9ffffff: good
map[24]: type I/O Port, range 32, base 0xaf00, size 7, enabled
pcib1: requested I/O range 0xaf00-0xaf7f: in range
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
pcib1: slot 0 INTA is routed to irq 16
vgapci0: <VGA-compatible display> port 0xaf00-0xaf7f mem 0xfa000000-0xfaffffff,0xd0000000-0xdfffffff,0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci1
uhci0: <UHCI (generic) USB controller> port 0xff00-0xff1f irq 16 at device 26.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff00
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xfe00-0xfe1f irq 21 at device 26.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xfe00
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 50
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xfd00-0xfd1f irq 19 at device 26.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xfd00
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 51
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfdfff000-0xfdfff3ff irq 18 at device 26.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfdfff000
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 52
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
pci0: <multimedia> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xd000-0xdfff
pcib2: memory decode 0xfdd00000-0xfddfffff
pcib2: prefetched decode 0xfda00000-0xfdafffff
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
pcib3: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xc000-0xcfff
pcib3: memory decode 0xfd900000-0xfd9fffff
pcib3: prefetched decode 0xfde00000-0xfdefffff
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
found-> vendor=0x197b, dev=0x2363, revid=0x02
domain=0, bus=3, slot=0, func=0
class=01-01-85, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xcf00, size 3, enabled
pcib3: requested I/O range 0xcf00-0xcf07: in range
map[14]: type I/O Port, range 32, base 0xce00, size 2, enabled
pcib3: requested I/O range 0xce00-0xce03: in range
map[18]: type I/O Port, range 32, base 0xcd00, size 3, enabled
pcib3: requested I/O range 0xcd00-0xcd07: in range
map[1c]: type I/O Port, range 32, base 0xcc00, size 2, enabled
pcib3: requested I/O range 0xcc00-0xcc03: in range
map[20]: type I/O Port, range 32, base 0xcb00, size 4, enabled
pcib3: requested I/O range 0xcb00-0xcb0f: in range
map[24]: type Memory, range 32, base 0xfd9fe000, size 13, enabled
pcib3: requested memory range 0xfd9fe000-0xfd9fffff: good
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 16
atapci0: <JMicron JMB363 SATA300 controller> port 0xcf00-0xcf07,0xce00-0xce03,0xcd00-0xcd07,0xcc00-0xcc03,0xcb00-0xcb0f mem 0xfd9fe000-0xfd9fffff irq 16 at device 0.0 on pci3
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xcb00
atapci0: [MPSAFE]
atapci0: [ITHREAD]
atapci0: Reserved 0x2000 bytes for rid 0x24 type 3 at 0xfd9fe000
atapci0: AHCI called from vendor specific driver
atapci0: AHCI Version 01.00 controller with 2 ports detected
ata2: <ATA channel 0> on atapci0
ata2: SATA connect status=00000000
ata2: ahci_reset devices=0x0
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: SATA connect status=00000000
ata3: ahci_reset devices=0x0
ata3: [MPSAFE]
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xcf00
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xce00
ata4: reset tp1 mask=03 ostat0=60 ostat1=70
ata4: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata4: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata4: reset tp2 stat0=20 stat1=30 devices=0x0
ata4: [MPSAFE]
ata4: [ITHREAD]
uhci3: <UHCI (generic) USB controller> port 0xfc00-0xfc1f irq 23 at device 29.0 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xfc00
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 53
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xfb00-0xfb1f irq 19 at device 29.1 on pci0
uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0xfb00
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
uhci5: <UHCI (generic) USB controller> port 0xfa00-0xfa1f irq 18 at device 29.2 on pci0
uhci5: Reserved 0x20 bytes for rid 0x20 type 4 at 0xfa00
uhci5: [GIANT-LOCKED]
uhci5: [ITHREAD]
usb6: <UHCI (generic) USB controller> on uhci5
usb6: USB revision 1.0
uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub6: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfdffe000-0xfdffe3ff irq 23 at device 29.7 on pci0
ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfdffe000
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb7: EHCI version 1.0
usb7: companion controllers, 2 ports each: usb4 usb5 usb6
usb7: <EHCI (generic) USB 2.0 controller> on ehci1
usb7: USB revision 2.0
uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
uhub7: 6 ports with 6 removable, self powered
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib4: domain 0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0xb000-0xbfff
pcib4: memory decode 0xfdc00000-0xfdcfffff
pcib4: prefetched decode 0xfdb00000-0xfdbfffff
pcib4: Subtractively decoded bridge.
pci4: <ACPI PCI bus> on pcib4
pci4: domain=0, physical bus=4
found-> vendor=0x10ec, dev=0x8167, revid=0x10
domain=0, bus=4, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=7
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0xbe00, size 8, enabled
pcib4: requested I/O range 0xbe00-0xbeff: in range
map[14]: type Memory, range 32, base 0xfdcff000, size 8, enabled
pcib4: requested memory range 0xfdcff000-0xfdcff0ff: good
pcib4: matched entry for 4.0.INTA
pcib4: slot 0 INTA hardwired to IRQ 23
found-> vendor=0x10ec, dev=0x8167, revid=0x10
domain=0, bus=4, slot=1, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0xbc00, size 8, enabled
pcib4: requested I/O range 0xbc00-0xbcff: in range
map[14]: type Memory, range 32, base 0xfdcfe000, size 8, enabled
pcib4: requested memory range 0xfdcfe000-0xfdcfe0ff: good
pcib4: matched entry for 4.1.INTA
pcib4: slot 1 INTA hardwired to IRQ 22
found-> vendor=0x104c, dev=0x8023, revid=0x00
domain=0, bus=4, slot=2, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x44 (2040 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=4
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfdcfd000, size 11, enabled
pcib4: requested memory range 0xfdcfd000-0xfdcfd7ff: good
map[14]: type Memory, range 32, base 0xfdcf8000, size 14, enabled
pcib4: requested memory range 0xfdcf8000-0xfdcfbfff: good
pcib4: matched entry for 4.2.INTA
pcib4: slot 2 INTA hardwired to IRQ 21
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xbe00
pcib4: re0 requested I/O range 0xbe00-0xbeff: in range
re0: <RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port 0xbe00-0xbeff mem 0xfdcff000-0xfdcff0ff irq 23 at device 0.0 on pci4
pcib4: re0 requested I/O range 0xbe00-0xbeff: in range
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: bpf attached
re0: Ethernet address: 00:50:8d:bd:81:4d
re0: [MPSAFE]
re0: [FILTER]
re1: Reserved 0x100 bytes for rid 0x10 type 4 at 0xbc00
pcib4: re1 requested I/O range 0xbc00-0xbcff: in range
re1: <RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port 0xbc00-0xbcff mem 0xfdcfe000-0xfdcfe0ff irq 22 at device 1.0 on pci4
pcib4: re1 requested I/O range 0xbc00-0xbcff: in range
miibus1: <MII bus> on re1
rgephy1: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus1
rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re1: bpf attached
re1: Ethernet address: 00:50:8d:bd:81:4e
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 54
re1: [MPSAFE]
re1: [FILTER]
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xfdcfd000-0xfdcfd7ff,0xfdcf8000-0xfdcfbfff irq 21 at device 2.0 on pci4
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xfdcfd000
fwohci0: [MPSAFE]
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:50:8d:00:00:b8:3a:a2
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x27cc000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:50:8d:b8:3a:a2
fwe0: bpf attached
fwe0: Ethernet address: 02:50:8d:b8:3a:a2
fwip0: <IP over FireWire> on firewire0
fwip0: bpf attached
fwip0: Firewire address: 00:50:8d:00:00:b8:3a:a2 @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH9 SATA300 controller> port 0xf900-0xf907,0xf800-0xf803,0xf700-0xf707,0xf600-0xf603,0xf500-0xf50f,0xf400-0xf40f irq 19 at device 31.2 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf500
atapci1: [MPSAFE]
atapci1: [ITHREAD]
atapci1: Reserved 0x10 bytes for rid 0x24 type 4 at 0xf400
ata5: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xf900
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xf800
ata5: reset tp1 mask=03 ostat0=7f ostat1=7f
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata5: reset tp2 stat0=ff stat1=ff devices=0x0
ata5: [MPSAFE]
ata5: [ITHREAD]
ata6: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xf700
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xf600
ata6: reset tp1 mask=03 ostat0=00 ostat1=50
ata6: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata6: stat1=0x50 err=0x01 lsb=0x00 msb=0x00
ata6: reset tp2 stat0=00 stat1=50 devices=0x6<ATAPI_MASTER,ATA_SLAVE>
ata6: [MPSAFE]
ata6: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci2: <Intel ICH9 SATA300 controller> port 0xf200-0xf207,0xf100-0xf103,0xf000-0xf007,0xef00-0xef03,0xee00-0xee0f,0xed00-0xed0f irq 19 at device 31.5 on pci0
atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xee00
atapci2: [MPSAFE]
atapci2: [ITHREAD]
atapci2: Reserved 0x10 bytes for rid 0x24 type 4 at 0xed00
ata7: <ATA channel 0> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0xf200
atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xf100
ata7: reset tp1 mask=03 ostat0=7f ostat1=7f
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata7: reset tp2 stat0=ff stat1=ff devices=0x0
ata7: [MPSAFE]
ata7: [ITHREAD]
ata8: <ATA channel 1> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0xf000
atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xef00
ata8: reset tp1 mask=03 ostat0=7f ostat1=7f
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata8: reset tp2 stat0=ff stat1=ff devices=0x0
ata8: [MPSAFE]
ata8: [ITHREAD]
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
ioapic0: routing intpin 6 (ISA IRQ 6) to vector 55
fdc0: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 56
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
ahc_isa_probe 11: ioport 0xbc00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ex_isa_identify()
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xd0000-0xd2fff on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 57
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 132527 -> 100000
procfs registered
lapic: Divisor 2, Frequency 178000671 hz
Timecounter "TSC" frequency 3204012006 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
no controller detected.
ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a21000 [20070320]
ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320]
ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE
acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE
ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a20000 [20070320]
ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320]
ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE
acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE
ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a20c00 [20070320]
ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320]
ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE
acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a1f800 [20070320]
ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320]
ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE
acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE
ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a1f800 [20070320]
ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320]
ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE
acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE
ata6-slave: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ata6-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
acd0: <TSSTcorp CDDVDW SH-S223F/SB00> DVDR drive at ata6 as master
acd0: read 8269KB/s (8269KB/s) write 8269KB/s (8269KB/s), 2048KB buffer, SATA150
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ad13: 476940MB <MAXTOR STM3500320AS MX15> at ata6-slave SATA150
ad13: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue
ad13: Intel check1 failed
ad13: Adaptec check1 failed
ad13: LSI (v3) check1 failed
ad13: LSI (v2) check1 failed
ad13: FreeBSD check1 failed
GEOM: new disk ad13
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #3 Launched!
cpu3 AP:
ID: 0x03000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #2 Launched!
cpu2 AP:
ID: 0x02000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 1
ioapic0: Assigning ISA IRQ 6 to local APIC 2
ioapic0: Assigning ISA IRQ 9 to local APIC 3
ioapic0: Assigning PCI IRQ 16 to local APIC 0
ioapic0: Assigning PCI IRQ 18 to local APIC 1
ioapic0: Assigning PCI IRQ 19 to local APIC 2
ioapic0: Assigning PCI IRQ 21 to local APIC 3
ioapic0: Assigning PCI IRQ 22 to local APIC 0
ioapic0: Assigning PCI IRQ 23 to local APIC 1
Trying to mount root from ufs:/dev/ad13s1a
start_init: trying /sbin/init
netsmb_dev: loaded
ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff00019a2c00 [20070320]
ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320]
ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE
acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE
--------------040504090904000406040409
Content-Type: text/plain;
name="dmesg.boot"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="dmesg.boot"
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #0: Sun Feb 24 10:35:36 UTC 2008
root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80bc8000.
Calibrating clock(s) ... i8254 clock: 1193341 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 3204012006 Hz
CPU: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (3204.01-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x6fb Stepping = 11
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 4
usable memory = 2133549056 (2034 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000000cc5000 - 0x000000007c297fff, 2069704704 bytes (505299 pages)
avail memory = 2058874880 (1963 MB)
ACPI APIC Table: <IntelR AWRDACPI>
INTR: Adding local APIC 1 as a target
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 3 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 3
APIC: CPU 2 has ACPI ID 1
APIC: CPU 3 has ACPI ID 2
ACPI: RSDP @ 0x0xf7860/0x0014 (v 0 IntelR)
ACPI: RSDT @ 0x0x7fee3000/0x0034 (v 1 IntelR AWRDACPI 0x42302E31 AWRD 0x00000000)
ACPI: FACP @ 0x0x7fee3080/0x0074 (v 1 IntelR AWRDACPI 0x42302E31 AWRD 0x00000000)
ACPI: DSDT @ 0x0x7fee3100/0x4D0B (v 1 INTELR AWRDACPI 0x00001000 MSFT 0x03000000)
ACPI: FACS @ 0x0x7fee0000/0x0040
ACPI: MCFG @ 0x0x7fee7f00/0x003C (v 1 IntelR AWRDACPI 0x42302E31 AWRD 0x00000000)
ACPI: APIC @ 0x0x7fee7e40/0x0084 (v 1 IntelR AWRDACPI 0x42302E31 AWRD 0x00000000)
ACPI: SSDT @ 0x0x7fee8860/0x0380 (v 1 PmRef CpuPm 0x00003000 INTL 0x20041203)
MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 4
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic2: Routing NMI -> LINT1
lapic2: LINT1 trigger: edge
lapic2: LINT1 polarity: high
lapic3: Routing NMI -> LINT1
lapic3: LINT1 trigger: edge
lapic3: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x0f000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
io: <I/O>
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 10:34:18)
acpi0: <IntelR AWRDACPI> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
AcpiOsDerivePciId: \\_SB_.PCI0.PEX4.JMB0.CF40 -> bus 3 dev 0 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.PX40.PIRQ -> bus 0 dev 31 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.PX40.PIR2 -> bus 0 dev 31 func 0
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7fde0000 (3) failed
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 4 5 7 9 10 11 12
Validation 0 10 N 0 4 5 7 9 10 11 12
After Disable 0 255 N 0 4 5 7 9 10 11 12
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 5 7 9 10 11 12
Validation 0 255 N 0 4 5 7 9 10 11 12
After Disable 0 255 N 0 4 5 7 9 10 11 12
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 4 5 7 9 10 11 12
Validation 0 11 N 0 4 5 7 9 10 11 12
After Disable 0 255 N 0 4 5 7 9 10 11 12
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 4 5 7 9 10 11 12
Validation 0 11 N 0 4 5 7 9 10 11 12
After Disable 0 255 N 0 4 5 7 9 10 11 12
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 5 7 9 10 11 12
Validation 0 255 N 0 4 5 7 9 10 11 12
After Disable 0 255 N 0 4 5 7 9 10 11 12
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 4 N 0 4 5 7 9 10 11 12
Validation 0 4 N 0 4 5 7 9 10 11 12
After Disable 0 255 N 0 4 5 7 9 10 11 12
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 4 5 7 9 10 11 12
Validation 0 5 N 0 4 5 7 9 10 11 12
After Disable 0 255 N 0 4 5 7 9 10 11 12
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 4 5 7 9 10 11 12
Validation 0 7 N 0 4 5 7 9 10 11 12
After Disable 0 255 N 0 4 5 7 9 10 11 12
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 924092406000924
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 924092406000924
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 924092406000924
device_attach: est2 attach returned 6
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 924092406000924
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x29c0, revid=0x02
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x29c1, revid=0x02
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2937, revid=0x02
domain=0, bus=0, slot=26, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
map[20]: type I/O Port, range 32, base 0xff00, size 5, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2938, revid=0x02
domain=0, bus=0, slot=26, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=4
map[20]: type I/O Port, range 32, base 0xfe00, size 5, enabled
pcib0: matched entry for 0.26.INTB
pcib0: slot 26 INTB hardwired to IRQ 21
found-> vendor=0x8086, dev=0x2939, revid=0x02
domain=0, bus=0, slot=26, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
map[20]: type I/O Port, range 32, base 0xfd00, size 5, enabled
pcib0: matched entry for 0.26.INTD
pcib0: slot 26 INTD hardwired to IRQ 19
found-> vendor=0x8086, dev=0x293c, revid=0x02
domain=0, bus=0, slot=26, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfdfff000, size 10, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x293e, revid=0x02
domain=0, bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xfdff8000, size 14, enabled
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 22
found-> vendor=0x8086, dev=0x2940, revid=0x02
domain=0, bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
found-> vendor=0x8086, dev=0x2948, revid=0x02
domain=0, bus=0, slot=28, func=4
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
found-> vendor=0x8086, dev=0x2934, revid=0x02
domain=0, bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
map[20]: type I/O Port, range 32, base 0xfc00, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x2935, revid=0x02
domain=0, bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[20]: type I/O Port, range 32, base 0xfb00, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x2936, revid=0x02
domain=0, bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
map[20]: type I/O Port, range 32, base 0xfa00, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x293a, revid=0x02
domain=0, bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfdffe000, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x244e, revid=0x92
domain=0, bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2916, revid=0x02
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2920, revid=0x02
domain=0, bus=0, slot=31, func=2
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x02b8, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xf900, size 3, enabled
map[14]: type I/O Port, range 32, base 0xf800, size 2, enabled
map[18]: type I/O Port, range 32, base 0xf700, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xf600, size 2, enabled
map[20]: type I/O Port, range 32, base 0xf500, size 4, enabled
map[24]: type I/O Port, range 32, base 0xf400, size 4, enabled
pcib0: matched entry for 0.31.INTA
pcib0: slot 31 INTA hardwired to IRQ 19
found-> vendor=0x8086, dev=0x2930, revid=0x02
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[10]: type Memory, range 64, base 0xfdffd000, size 8, enabled
map[20]: type I/O Port, range 32, base 0x500, size 5, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 18
found-> vendor=0x8086, dev=0x2926, revid=0x02
domain=0, bus=0, slot=31, func=5
class=01-01-85, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xf200, size 3, enabled
map[14]: type I/O Port, range 32, base 0xf100, size 2, enabled
map[18]: type I/O Port, range 32, base 0xf000, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xef00, size 2, enabled
map[20]: type I/O Port, range 32, base 0xee00, size 4, enabled
map[24]: type I/O Port, range 32, base 0xed00, size 4, enabled
pcib0: matched entry for 0.31.INTA
pcib0: slot 31 INTA hardwired to IRQ 19
pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xa000-0xafff
pcib1: memory decode 0xf8000000-0xfbffffff
pcib1: prefetched decode 0xd0000000-0xdfffffff
pci1: <PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x10de, dev=0x0611, revid=0xa2
domain=0, bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xfa000000, size 24, enabled
pcib1: requested memory range 0xfa000000-0xfaffffff: good
map[14]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled
pcib1: requested memory range 0xd0000000-0xdfffffff: good
map[1c]: type Memory, range 64, base 0xf8000000, size 25, enabled
pcib1: requested memory range 0xf8000000-0xf9ffffff: good
map[24]: type I/O Port, range 32, base 0xaf00, size 7, enabled
pcib1: requested I/O range 0xaf00-0xaf7f: in range
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
pcib1: slot 0 INTA is routed to irq 16
vgapci0: <VGA-compatible display> port 0xaf00-0xaf7f mem 0xfa000000-0xfaffffff,0xd0000000-0xdfffffff,0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci1
uhci0: <UHCI (generic) USB controller> port 0xff00-0xff1f irq 16 at device 26.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff00
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xfe00-0xfe1f irq 21 at device 26.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xfe00
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 50
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xfd00-0xfd1f irq 19 at device 26.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xfd00
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 51
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfdfff000-0xfdfff3ff irq 18 at device 26.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfdfff000
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 52
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
pci0: <multimedia> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xd000-0xdfff
pcib2: memory decode 0xfdd00000-0xfddfffff
pcib2: prefetched decode 0xfda00000-0xfdafffff
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
pcib3: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xc000-0xcfff
pcib3: memory decode 0xfd900000-0xfd9fffff
pcib3: prefetched decode 0xfde00000-0xfdefffff
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
found-> vendor=0x197b, dev=0x2363, revid=0x02
domain=0, bus=3, slot=0, func=0
class=01-01-85, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xcf00, size 3, enabled
pcib3: requested I/O range 0xcf00-0xcf07: in range
map[14]: type I/O Port, range 32, base 0xce00, size 2, enabled
pcib3: requested I/O range 0xce00-0xce03: in range
map[18]: type I/O Port, range 32, base 0xcd00, size 3, enabled
pcib3: requested I/O range 0xcd00-0xcd07: in range
map[1c]: type I/O Port, range 32, base 0xcc00, size 2, enabled
pcib3: requested I/O range 0xcc00-0xcc03: in range
map[20]: type I/O Port, range 32, base 0xcb00, size 4, enabled
pcib3: requested I/O range 0xcb00-0xcb0f: in range
map[24]: type Memory, range 32, base 0xfd9fe000, size 13, enabled
pcib3: requested memory range 0xfd9fe000-0xfd9fffff: good
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 16
atapci0: <JMicron JMB363 SATA300 controller> port 0xcf00-0xcf07,0xce00-0xce03,0xcd00-0xcd07,0xcc00-0xcc03,0xcb00-0xcb0f mem 0xfd9fe000-0xfd9fffff irq 16 at device 0.0 on pci3
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xcb00
atapci0: [MPSAFE]
atapci0: [ITHREAD]
atapci0: Reserved 0x2000 bytes for rid 0x24 type 3 at 0xfd9fe000
atapci0: AHCI called from vendor specific driver
atapci0: AHCI Version 01.00 controller with 2 ports detected
ata2: <ATA channel 0> on atapci0
ata2: SATA connect status=00000000
ata2: ahci_reset devices=0x0
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: SATA connect status=00000000
ata3: ahci_reset devices=0x0
ata3: [MPSAFE]
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xcf00
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xce00
ata4: reset tp1 mask=03 ostat0=60 ostat1=70
ata4: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata4: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata4: reset tp2 stat0=20 stat1=30 devices=0x0
ata4: [MPSAFE]
ata4: [ITHREAD]
uhci3: <UHCI (generic) USB controller> port 0xfc00-0xfc1f irq 23 at device 29.0 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xfc00
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 53
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xfb00-0xfb1f irq 19 at device 29.1 on pci0
uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0xfb00
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
uhci5: <UHCI (generic) USB controller> port 0xfa00-0xfa1f irq 18 at device 29.2 on pci0
uhci5: Reserved 0x20 bytes for rid 0x20 type 4 at 0xfa00
uhci5: [GIANT-LOCKED]
uhci5: [ITHREAD]
usb6: <UHCI (generic) USB controller> on uhci5
usb6: USB revision 1.0
uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub6: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfdffe000-0xfdffe3ff irq 23 at device 29.7 on pci0
ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfdffe000
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb7: EHCI version 1.0
usb7: companion controllers, 2 ports each: usb4 usb5 usb6
usb7: <EHCI (generic) USB 2.0 controller> on ehci1
usb7: USB revision 2.0
uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
uhub7: 6 ports with 6 removable, self powered
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib4: domain 0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0xb000-0xbfff
pcib4: memory decode 0xfdc00000-0xfdcfffff
pcib4: prefetched decode 0xfdb00000-0xfdbfffff
pcib4: Subtractively decoded bridge.
pci4: <ACPI PCI bus> on pcib4
pci4: domain=0, physical bus=4
found-> vendor=0x10ec, dev=0x8167, revid=0x10
domain=0, bus=4, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=7
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0xbe00, size 8, enabled
pcib4: requested I/O range 0xbe00-0xbeff: in range
map[14]: type Memory, range 32, base 0xfdcff000, size 8, enabled
pcib4: requested memory range 0xfdcff000-0xfdcff0ff: good
pcib4: matched entry for 4.0.INTA
pcib4: slot 0 INTA hardwired to IRQ 23
found-> vendor=0x10ec, dev=0x8167, revid=0x10
domain=0, bus=4, slot=1, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0xbc00, size 8, enabled
pcib4: requested I/O range 0xbc00-0xbcff: in range
map[14]: type Memory, range 32, base 0xfdcfe000, size 8, enabled
pcib4: requested memory range 0xfdcfe000-0xfdcfe0ff: good
pcib4: matched entry for 4.1.INTA
pcib4: slot 1 INTA hardwired to IRQ 22
found-> vendor=0x104c, dev=0x8023, revid=0x00
domain=0, bus=4, slot=2, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x44 (2040 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=4
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfdcfd000, size 11, enabled
pcib4: requested memory range 0xfdcfd000-0xfdcfd7ff: good
map[14]: type Memory, range 32, base 0xfdcf8000, size 14, enabled
pcib4: requested memory range 0xfdcf8000-0xfdcfbfff: good
pcib4: matched entry for 4.2.INTA
pcib4: slot 2 INTA hardwired to IRQ 21
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xbe00
pcib4: re0 requested I/O range 0xbe00-0xbeff: in range
re0: <RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port 0xbe00-0xbeff mem 0xfdcff000-0xfdcff0ff irq 23 at device 0.0 on pci4
pcib4: re0 requested I/O range 0xbe00-0xbeff: in range
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: bpf attached
re0: Ethernet address: 00:50:8d:bd:81:4d
re0: [MPSAFE]
re0: [FILTER]
re1: Reserved 0x100 bytes for rid 0x10 type 4 at 0xbc00
pcib4: re1 requested I/O range 0xbc00-0xbcff: in range
re1: <RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port 0xbc00-0xbcff mem 0xfdcfe000-0xfdcfe0ff irq 22 at device 1.0 on pci4
pcib4: re1 requested I/O range 0xbc00-0xbcff: in range
miibus1: <MII bus> on re1
rgephy1: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus1
rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re1: bpf attached
re1: Ethernet address: 00:50:8d:bd:81:4e
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 54
re1: [MPSAFE]
re1: [FILTER]
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xfdcfd000-0xfdcfd7ff,0xfdcf8000-0xfdcfbfff irq 21 at device 2.0 on pci4
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xfdcfd000
fwohci0: [MPSAFE]
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:50:8d:00:00:b8:3a:a2
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x27cc000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:50:8d:b8:3a:a2
fwe0: bpf attached
fwe0: Ethernet address: 02:50:8d:b8:3a:a2
fwip0: <IP over FireWire> on firewire0
fwip0: bpf attached
fwip0: Firewire address: 00:50:8d:00:00:b8:3a:a2 @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH9 SATA300 controller> port 0xf900-0xf907,0xf800-0xf803,0xf700-0xf707,0xf600-0xf603,0xf500-0xf50f,0xf400-0xf40f irq 19 at device 31.2 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf500
atapci1: [MPSAFE]
atapci1: [ITHREAD]
atapci1: Reserved 0x10 bytes for rid 0x24 type 4 at 0xf400
ata5: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xf900
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xf800
ata5: reset tp1 mask=03 ostat0=7f ostat1=7f
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata5: reset tp2 stat0=ff stat1=ff devices=0x0
ata5: [MPSAFE]
ata5: [ITHREAD]
ata6: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xf700
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xf600
ata6: reset tp1 mask=03 ostat0=00 ostat1=50
ata6: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata6: stat1=0x50 err=0x01 lsb=0x00 msb=0x00
ata6: reset tp2 stat0=00 stat1=50 devices=0x6<ATAPI_MASTER,ATA_SLAVE>
ata6: [MPSAFE]
ata6: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci2: <Intel ICH9 SATA300 controller> port 0xf200-0xf207,0xf100-0xf103,0xf000-0xf007,0xef00-0xef03,0xee00-0xee0f,0xed00-0xed0f irq 19 at device 31.5 on pci0
atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xee00
atapci2: [MPSAFE]
atapci2: [ITHREAD]
atapci2: Reserved 0x10 bytes for rid 0x24 type 4 at 0xed00
ata7: <ATA channel 0> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0xf200
atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xf100
ata7: reset tp1 mask=03 ostat0=7f ostat1=7f
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata7: reset tp2 stat0=ff stat1=ff devices=0x0
ata7: [MPSAFE]
ata7: [ITHREAD]
ata8: <ATA channel 1> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0xf000
atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xef00
ata8: reset tp1 mask=03 ostat0=7f ostat1=7f
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata8: reset tp2 stat0=ff stat1=ff devices=0x0
ata8: [MPSAFE]
ata8: [ITHREAD]
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
ioapic0: routing intpin 6 (ISA IRQ 6) to vector 55
fdc0: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 56
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
ahc_isa_probe 11: ioport 0xbc00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ex_isa_identify()
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xd0000-0xd2fff on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 57
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 132527 -> 100000
procfs registered
lapic: Divisor 2, Frequency 178000671 hz
Timecounter "TSC" frequency 3204012006 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
no controller detected.
ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a21000 [20070320]
ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320]
ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE
acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE
ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a20000 [20070320]
ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320]
ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE
acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE
ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a20c00 [20070320]
ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320]
ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE
acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a1f800 [20070320]
ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320]
ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE
acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE
ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a1f800 [20070320]
ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320]
ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE
acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE
ata6-slave: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ata6-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
acd0: <TSSTcorp CDDVDW SH-S223F/SB00> DVDR drive at ata6 as master
acd0: read 8269KB/s (8269KB/s) write 8269KB/s (8269KB/s), 2048KB buffer, SATA150
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ad13: 476940MB <MAXTOR STM3500320AS MX15> at ata6-slave SATA150
ad13: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue
ad13: Intel check1 failed
ad13: Adaptec check1 failed
ad13: LSI (v3) check1 failed
ad13: LSI (v2) check1 failed
ad13: FreeBSD check1 failed
GEOM: new disk ad13
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #3 Launched!
cpu3 AP:
ID: 0x03000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #2 Launched!
cpu2 AP:
ID: 0x02000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 1
ioapic0: Assigning ISA IRQ 6 to local APIC 2
ioapic0: Assigning ISA IRQ 9 to local APIC 3
ioapic0: Assigning PCI IRQ 16 to local APIC 0
ioapic0: Assigning PCI IRQ 18 to local APIC 1
ioapic0: Assigning PCI IRQ 19 to local APIC 2
ioapic0: Assigning PCI IRQ 21 to local APIC 3
ioapic0: Assigning PCI IRQ 22 to local APIC 0
ioapic0: Assigning PCI IRQ 23 to local APIC 1
Trying to mount root from ufs:/dev/ad13s1a
start_init: trying /sbin/init
netsmb_dev: loaded
ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff00019a2c00 [20070320]
ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320]
ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE
acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE
ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a1cc00 [20070320]
ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320]
ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE
acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE
ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff00039c0c00 [20070320]
ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320]
ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE
acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE
ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a20000 [20070320]
ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320]
ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE
acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE
ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a1f000 [20070320]
ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320]
ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE
acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE
ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff00039b0400 [20070320]
ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320]
ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE
acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE
ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a1e000 [20070320]
ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320]
ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE
acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE
ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff00019c6400 [20070320]
ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320]
ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE
acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE
ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003883800 [20070320]
ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320]
ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE
acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE
ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003883800 [20070320]
ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320]
ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE
acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE
ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff00019c6400 [20070320]
ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320]
ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE
acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE
ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a1e000 [20070320]
ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320]
ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE
acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE
ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff00039cac00 [20070320]
ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320]
ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE
acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE
ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a1cc00 [20070320]
ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320]
ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE
acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE
ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff00039c0c00 [20070320]
ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320]
ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE
acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE
ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a20000 [20070320]
ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320]
ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE
acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE
ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a1f000 [20070320]
ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320]
ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE
acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE
ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a1e800 [20070320]
ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320]
ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE
acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE
ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003883800 [20070320]
ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320]
ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE
acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE
ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003883800 [20070320]
ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320]
ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE
acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE
ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff00019c7c00 [20070320]
ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320]
ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE
acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE
ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a1d800 [20070320]
ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320]
ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE
acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE
ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff0003a1dc00 [20070320]
ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320]
ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE
acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE
ACPI Error (dswstate-0185): Result stack is empty! State=0xffffff00039c9000 [20070320]
ACPI Exception (dsutils-0766): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070320]
ACPI Exception (dsutils-0894): AE_AML_NO_RETURN_VALUE, While creating Arg 0 [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.THRM._TMP] (Node 0xffffff000123ebe0), AE_AML_NO_RETURN_VALUE
acpi_tz0: error fetching current temperature -- AE_AML_NO_RETURN_VALUE
--------------040504090904000406040409--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?48987127.5080902>