Date: Sun, 12 Sep 1999 12:16:58 +0000 (GMT) From: Edward Ing <bsdlist@cr343877-a.wlfdle1.on.wave.home.com> To: questions@freebsd.org Subject: Kernel configuration problem. Don't know what's the matter Message-ID: <Pine.BSF.4.05.9909121215110.15219-100000@cr343877-a.wlfdle1.on.wave.home.com>
next in thread | raw e-mail | index | archive | help
Hi, here is a copy of my kernel configuration. Please analyze. # # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.freebsd.org/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.143.2.20 1999/09/01 22:27:00 eivind Exp $ machine "i386" cpu "I586_CPU" ident ERINMILLS maxusers 32 options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, "NFS" req'ed options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) syscall trace support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options QUOTA options IPFIREWALL options IPFIREWALL_VERBOSE options IPFIREWALL_VERBOSE_LIMIT=50 options IPDIVERT config kernel root on da0 # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): #options NCPU=2 # number of CPUs #options NBUS=4 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs controller isa0 controller pnp0 # PnP support for ISA #controller eisa0 controller pci0 # Floppy drives controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 # IDE controller and disks #options "CMD640" # work around CMD640 chip deficiency #controller wdc0 at isa? port "IO_WD1" bio irq 14 #disk wd0 at wdc0 drive 0 #disk wd1 at wdc0 drive 1 #controller wdc1 at isa? port "IO_WD2" bio irq 15 #disk wd2 at wdc1 drive 0 #disk wd3 at wdc1 drive 1 # ATAPI devices #options ATAPI #Enable ATAPI support for IDE bus #options ATAPI_STATIC #Don't do it as an LKM #device acd0 #IDE CD-ROM #device wfd0 #IDE Floppy (e.g. LS-120) # SCSI Controllers # A single entry for any of these controllers (ncr, ahb, ahc) is # sufficient for any number of installed devices. #controller ncr0 # NCR/Symbios Logic #controller ahb0 # EISA AHA1742 family controller ahc0 # AHA2940 and onboard AIC7xxx devices #controller isp0 # Qlogic family #controller dpt0 # DPT Smartcache - See LINT for options! #controller adv0 at isa? port ? cam irq ? #controller adw0 #controller bt0 at isa? port ? cam irq ? #controller aha0 at isa? port ? cam irq ? # SCSI peripherals # Only one of each of these is needed, they are dynamically allocated. controller scbus0 # SCSI bus (required) device da0 # Direct Access (disks) device sa0 # Sequential Access (tape etc) device cd0 # CD device pass0 # Passthrough device (direct SCSI) # Proprietary or custom CD-ROM Interfaces #device wt0 at isa? port 0x300 bio irq 5 drq 1 #device mcd0 at isa? port 0x300 bio irq 10 device matcd0 at isa? port 0x230 bio #device scd0 at isa? port 0x230 bio # atkbdc0 controls both the keyboard and the PS/2 mouse controller atkbdc0 at isa? port IO_KBD tty device atkbd0 at isa? tty irq 1 device psm0 at isa? tty irq 12 device vga0 at isa? port ? conflicts # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? tty # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? tty #options XSERVER # support for X server #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx0 at isa? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at isa? disable flags 0x31 # Advanced Power Management # PCCARD (PCMCIA) support #controller card0 #device pcic0 at card? #device pcic1 at card? # Serial (COM) ports device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 device sio1 at isa? port "IO_COM2" tty irq 3 device sio2 at isa? disable port "IO_COM3" tty irq 5 device sio3 at isa? disable port "IO_COM4" tty irq 9 # Parallel port device ppc0 at isa? port? flags 0x40 net irq 7 controller ppbus0 # Parallel port bus (required) device lpt0 at ppbus? # Printer device plip0 at ppbus? # TCP/IP over parallel device ppi0 at ppbus? # Parallel port interface device #controller vpo0 at ppbus? # Requires scbus and da0 # PCI Ethernet NICs. #device al0 # ADMtek AL981 (``Comet'') #device ax0 # ASIX AX88140A device de0 # DEC/Intel DC21x4x (``Tulip'') #device fxp0 # Intel EtherExpress PRO/100B (82557, 82558) #device mx0 # Macronix 98713/98715/98725 (``PMAC'') #device pn0 # Lite-On 82c168/82c169 (``PNIC'') device rl0 # RealTek 8129/8139 #device sf0 # Adaptec AIC-6915 DuraLAN (``Starfire'') #device tl0 # Texas Instruments ThunderLAN #device tx0 # SMC 9432TX (83c170 ``EPIC'') #device vr0 # VIA Rhine, Rhine II #device vx0 # 3Com 3c590, 3c595 (``Vortex'') #device wb0 # Winbond W89C840F #device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 #device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 #device ep0 at isa? port 0x300 net irq 10 #device ex0 at isa? port? net irq? #device fe0 at isa? port 0x300 net irq ? #device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 #device lnc0 at isa? port 0x280 net irq 10 drq 0 #device cs0 at isa? port 0x300 net irq ? # requires PCCARD (PCMCIA) support to be activated #device xe0 at isa? port? net irq ? # PCCARD NIC drivers. # ze and zp take over the pcic and cannot coexist with generic pccard # support, nor the ed and ep drivers they replace. #device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000 #device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun 1 # Packet tunnel, for ppp(1) pseudo-device pty 16 # Pseudo-ttys (telnet etc) pseudo-device gzip # Exec gzipped a.out's # The `bpfilter' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # The number of devices determines the maximum number of # simultaneous BPF clients programs runnable. #pseudo-device bpfilter 1 #Berkeley packet filter Edward Ing To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.05.9909121215110.15219-100000>