Date: Wed, 13 Oct 1999 12:00:35 -0400 (EDT) From: Matt White <mjw@dhp.com> To: Randy Bush <randy@psg.com> Cc: FreeBSD Laptoppers <freebsd-mobile@freebsd.org> Subject: Re: roamabout startup Message-ID: <Pine.BSF.4.10.9910131154510.286-100000@mjw-0.dsl.speakeasy.net> In-Reply-To: <E11arp3-0001Wt-00@rip.psg.com>
index | next in thread | previous in thread | raw e-mail
Hmmm...here's what I have:
/etc/pccard.conf:
# AT&T GIS Wavelan PCMCIA
# If you want to use Japanese version, uncomment the second config
# line and comment-out the first line.
card "AT&T" "WaveLAN/PCMCIA"
config default "wlp0" any # US version (915MHz)
# config default "wlp0" any 0x01 # Japanese version (2.4GHz)
ether wavelan
insert logger -s AT\&T WaveLAN PCMCIA inserted
insert /usr/sbin/wlpconfig -i $device -w 5692
insert /etc/pccard_ether $device
remove logger -s AT\&T WaveLAN PCMCIA removed
remove /etc/pccard_ether_remove $device
/etc/rc.conf:
pccard_ether="wlp0"
ifconfig_common="inet 216.231.36.127 netmask 255.255.255.0"
ifconfig_wlp0=$ifconfig_common
Try switching your ifconfig lines in /etc/rc.conf around and see if that
helps.
-Matt
On Mon, 11 Oct 1999, Randy Bush wrote:
> >> wavelans seem to work in 3.3+pao. thank you!
> >>
> >> but, if the wavelan is the main interface, it needs to have wlpconfig run to
> >> set the nwid or the startup will hang. where is it best to config the card?
> >>
> >> i tried adding the wlpconfig command as an insert in /etc/pccard.conf, but
> >> no go.
> >
> > Hmmm...that worked fine for me. You sure you modified the right entry? I
> > know that sounds like a silly question, but I didn't the first time
> > through.
>
> card "Digital" "RoamAbout/DS"
> config default "wlp0" any
> ether wavelan
> insert logger -s Digital RoamAbout/DS inserted
> insert /usr/sbin/wlpconfig -i wlp0 -w 0xaaaa
> insert /etc/pccard_ether $device
> remove logger -s Digital RoamAbout/DS removed
> remove /etc/pccard_ether_remove $device
>
> and /etc/rc.conf sez
>
> network_interfaces="auto" # List of network interfaces (or "auto").
> ifconfig_ep0="inet 147.28.0.38 netmask 255.255.255.0"
> ifconfig_wlp0="inet 147.28.2.2 netmask 255.255.255.0"
> ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
> defaultrouter="147.28.2.1"
>
> and, after
>
> Oct 11 07:19:53 roam pccardd[59]: Card "Digital"("RoamAbout/DS") [Version 2.00] [WaveLAN/PCMCIA] matched "Digital" ("RoamAbout/DS") [(null)] [(null)]
> Oct 11 07:19:53 roam pccardd[59]: No MAC address definition for "Digital"("RoamAbout/DS") [(null)] [(null)]
> Oct 11 07:19:53 roam pccardd[59]: Wavelan NWID[ee:ee] MAC[08:00:6a:2b:3e:83(Universal)] PCMCIA 915MHz
> Oct 11 07:19:56 roam /kernel: card0: assign wlp0 iobase 0x240 irq 10
> Oct 11 07:19:56 roam /kernel: wlp0: nwid [ee:ee] mac:[8:0:6a:2b:3e:83]
>
> i get only
>
> roam.psg.com:/root# netstat -rn
> Destination Gateway Flags Refs Use Netif Expire
> 127.0.0.1 127.0.0.1 UH 1 260 lo0
>
> and the interface is not up and the nwid is not set.
>
> randy
>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.9910131154510.286-100000>