Date: Tue, 9 Apr 2002 18:51:56 -0700 From: "David O'Brien" <obrien@freebsd.org> To: alpha@freebsd.org Subject: problem with PCI-PCI bridges in AS 250/266? Message-ID: <20020409185156.A48309@dragon.nuxi.com>
next in thread | raw e-mail | index | archive | help
I am trying to use a single HP PCI card with both a Symbios 875 and AMD PCnet/FAST NIC. The AS250 is having interrupt problem with this card. Anyone have any ideas? The "dec_2100_a50_intr_map" is probably a bad sign. >>>ff.fe.fd.fc.fb.fa.f9.f8.f7.f6.f5. ef.df.ee.Shared PIRQ0 in slot 2 ed.ec.f4.eb.ea.e9.e8.e7.e6.....e5. V7.0-9, built on Mar 18 1999 at 13:41:11 >>>show dev dka100.1.0.6.0 DKA100 QUANTUM FIREBALL_TM1280S 300N dka500.5.0.6.0 DKA500 RRD45 1645 dkb0.0.0.1000.0 DKB0 IBM DDRS-34560W S97B dva0.0.0.0.1 DVA0 ewa0.0.0.11.0 EWA0 08-00-2B-E5-DA-37 pka0.7.0.6.0 PKA0 SCSI Bus ID 7 pkb0.7.0.1000.0 PKB0 SCSI Bus ID 7 >>>show conf PCI Bus Bus 00 Slot 06: NCR 810 Scsi Controller pka0.7.0.6.0 SCSI Bus ID 7 dka100.1.0.6.0 QUANTUM FIREBALL_TM1 dka500.5.0.6.0 RRD45 Bus 00 Slot 07: Intel SIO 82378 Bus 00 Slot 11: DECchip 21040 Network Controller ewa0.0.0.11.0 08-00-2B-E5-DA-37 Bus 00 Slot 12: DECchip 21152 PCI to PCI Bridge Bus 01 Slot 00: NCR 875 Scsi Controller pkb0.7.0.1000.0 SCSI Bus ID 7 dkb0.0.0.1000.0 IBM DDRS-34560W Bus 01 Slot 01: Vendor: 1022 Device: 2000 Bus 00 Slot 13: Vendor: 10b7 Device: 9055 AlphaStation 250 4/266, 268MHz 8192 byte page size, 1 processor. CPU: EV45 (21064A) major=6 minor=0 OSF PAL rev: 0x100000002012e real memory = 199278592 (194608K bytes) Physical memory chunk(s): 0x007de000 - 0x0bff5fff, 193036288 bytes (23564 pages) avail memory = 187301888 (182912K bytes) Preloaded elf kernel "kernel" at 0xfffffc00007c2000. md0: Malloc disk Creating DISK md0 found-> vendor=0x1000, dev=0x0001, revid=0x02 class=01-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base 00011000, size 8 map[14]: type 1, range 32, base 82220000, size 8 found-> vendor=0x8086, dev=0x0484, revid=0x84 class=00-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x1011, dev=0x0002, revid=0x23 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=5 map[10]: type 1, range 32, base 00011180, size 7 map[14]: type 1, range 32, base 82220180, size 7 found-> vendor=0x1011, dev=0x0024, revid=0x02 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=0 secondarybus=1 found-> vendor=0x10b7, dev=0x9055, revid=0x24 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=14 map[10]: type 1, range 32, base 00011100, size 7 map[14]: type 1, range 32, base 82220100, size 7 pci0: <PCI bus> on pcib0 sym0: <810> port 0x11000-0x110ff mem 0x82220000-0x822200ff irq 11 at device 6.0 on pci0 sym0: No NVRAM, ID 7, Fast-10, SE, parity checking sym0: open drain IRQ line driver sym0: using NCR-generic firmware. sym0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/00/00/00/00/00 sym0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 03/c8/00/00/08/00 sym0: Delay (GEN=11): 263 msec, 33795 KHz sym0: Delay (GEN=11): 279 msec, 31857 KHz sym0: Delay (GEN=11): 279 msec, 31857 KHz sym0: interrupting at ISA irq 11 isab0: <Intel 82378IB PCI to ISA bridge> at device 7.0 on pci0 Bus Modes: Bus Park, Resource Lock, IDE controller: Secondary (170h-177h,376h,377h) Floppy controller: 370h,371h Floppy controller: 372h-377h Keyboard controller: 60h,62h,64h,66h RTC: 70h-77h Configuration RAM: 0C00h,0800h-08FFh Port 92: enabled isa0: <ISA bus> on isab0 de0: <Digital 21040 Ethernet> port 0x11180-0x111ff mem 0x82220180-0x822201ff irq 5 at device 11.0 on pci0 de0: interrupting at ISA irq 5 de0: DEC 21040 [10Mb/s] pass 2.3 de0: address 08:00:2b:e5:da:37 bpf: de0 attached pcib1: <DEC 21152 PCI-PCI bridge> at device 12.0 on pci0 dec_2100_a50_intr_map: weird slot 0 found-> vendor=0x1000, dev=0x000f, revid=0x04 class=01-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=5 map[10]: type 1, range 32, base 00010000, size 8 map[14]: type 1, range 32, base 82111000, size 8 map[18]: type 1, range 32, base 82110000, size 12 dec_2100_a50_intr_map: weird slot 1 found-> vendor=0x1022, dev=0x2000, revid=0x25 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=5 map[10]: type 1, range 32, base 00000000, size 5 map[14]: type 1, range 32, base 82111100, size 5 pci1: <PCI bus> on pcib1 sym1: <875> port 0x10000-0x100ff mem 0x82110000-0x82110fff,0x82111000-0x821110ff irq 5 at device 0.0 on pci1 sym1: failed to allocate IRQ resource device_probe_and_attach: sym1 attach returned 6 pcn0: couldn't map ports/memory pci1: <unknown card> (vendor=0x1022, dev=0x2000) at 1.0 irq 5 xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0x11100-0x1117f mem 0x82220100-0x8222017f irq 14 at device 13.0 on pci0 xl0: interrupting at ISA irq 14 xl0: Ethernet address: 00:10:5a:09:a7:bb xl0: media options word: a xl0: found MII/AUTO miibus0: <MII bus> on xl0 xlphy0: <3Com internal media interface> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: xl0 attached Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: interrupting at ISA irq 6 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000 atkbd0: interrupting at ISA irq 1 psm0: current command byte:0061 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xb8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 00 0f 00 00 ff ff 9c 8e 8f 28 1f 96 b9 a3 ff 00 04 02 14 01 05 03 07 38 3c 3a 3e 39 3d 3b 3f 04 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 00 0f 00 00 ff ff 9c 8e 8f 28 1f 96 b9 a3 ff 00 04 02 14 01 05 03 07 38 3c 3a 3e 39 3d 3b 3f 04 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x0> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0 Calibrating clock(s) ... PCC clock: 267997344 Hz (firmware 268096514 Hz) sio0: irq maps: 0x61 0x71 0x61 0x60 sio0 at port 0x3f8-0x3ff irq 4 on isa0 sio0: type 16550A, console sio0: interrupting at ISA irq 4 sio1: reserved for low-level i/o sio1 failed to probe at port 0x2f8-0x2ff irq 3 flags 0x50 on isa0 ppc0: using normal I/O port range ppc0: SPP ppc0: <Parallel port> at port 0x3bc-0x3bf irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode lpt0: <Printer> on ppbus0 lpt0: Polled port ppi0: <Parallel I/O> on ppbus0 ppc0: interrupting at ISA irq 7 isa_probe_children: probing PnP devices Timecounter "alpha" frequency 267997344 Hz bpf: lo0 attached bpf: ppp0 attached bpf: sl0 attached bpf: faith0 attached Waiting 15 seconds for SCSI devices to settle (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. de0: enabling 10baseT port (probe5:sym0:0:5:0): INQUIRY. CDB: 12 1 80 0 ff 0 (probe5:sym0:0:5:0): ILLEGAL REQUEST asc:24,0 (probe5:sym0:0:5:0): Invalid field in CDB sks:c8,1 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020409185156.A48309>