Date: Thu, 23 Apr 2009 15:22:29 +0200 From: M K <klingfon@gmail.com> To: freebsd-acpi@freebsd.org Subject: Kernel panic on 7.2-RC1 when booting with ACPI enabled kernel. Message-ID: <43b1bb350904230622u4b7790f0p9f665b649c97a3b@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Hi! I upgraded my fileserver from 7.0 to 7.2-RC1 using the freebsd-update method. Everything went fine during the upgrade but when I attempted to boot with the new kernel(GENERIC) the default choice of kernel with ACPI enabled did not work. I have to boot by choosing the kernel with ACPI disabled. And then it boots perfect. When I used 7.0 everything worked fine. dmesg when booting without ACPI and ASL can be found on http://midroc.dyndns.org/~kling/ I have little experience of using kgdb and debugging. So if I should pull out some more info from the dump please specify exactly what I should write. I have tried to disable things in BIOS but without luck. Best regards, Magnus This is what a bt and list of instruction pointer from kgdb has to offer: GNU gdb 6.1.1 [FreeBSD] Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i386-marcel-freebsd"... Unread portion of the kernel message buffer: Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.1-RELEASE-p5 #1: Thu Apr 23 12:46:52 CEST 2009 root@kling.telia.se:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2405.46-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x4400<CNXT-ID,xTPR> real memory = 268353536 (255 MB) avail memory = 248500224 (236 MB) ACPI APIC Table: <ASUS P4T533-C> ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <ASUS P4T533-C> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, ff00000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82850 host to AGP bridge> on hostb0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> mem 0xee000000-0xeeffffff,0xf0000000-0xf7ffffff irq 16 at device 0.0 on pci1 pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 ohci0: <NEC uPD 9210 USB controller> mem 0xed800000-0xed800fff irq 21 at device 4.0 on pci2 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0 usb0: <NEC uPD 9210 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 3 ports with 3 removable, self powered ohci1: <NEC uPD 9210 USB controller> mem 0xed000000-0xed000fff irq 22 at device 4.1 on pci2 ohci1: [GIANT-LOCKED] ohci1: [ITHREAD] usb1: OHCI version 1.0 usb1: <NEC uPD 9210 USB controller> on ohci1 usb1: USB revision 1.0 uhub1: <NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0xec800000-0xec8000ff irq 23 at device 4.2 on pci2 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: EHCI version 0.95 usb2: companion controllers, 3 ports each: usb0 usb1 usb2: <NEC uPD 720100 USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: <NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2 uhub2: 5 ports with 5 removable, self powered atapci0: <Promise PDC20621 UDMA100 controller> port 0xd800-0xd8ff,0xd400-0xd4ff, 0xd000-0xd0ff mem 0xec000000-0xec0fffff,0xeb800000-0xeb807fff irq 22 at device 10.0 on pci2 atapci0: [ITHREAD] atapci0: [ITHREAD] atapci0: DIMM size 128MB @ 0x00000000 ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: [ITHREAD] ata4: <ATA channel 2> on atapci0 ata4: [ITHREAD] ata5: <ATA channel 3> on atapci0 ata5: [ITHREAD] xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xb800-0xb87f mem 0xeb000000-0xeb00007f irq 20 at device 12.0 on pci2 miibus0: <MII bus> on xl0 xlphy0: <3Com internal media interface> PHY 24 on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: Ethernet address: 00:10:4b:45:ba:cf xl0: [ITHREAD] xl1: <3Com 3c905-TX Fast Etherlink XL> port 0xb400-0xb43f irq 18 at device 13.0 on pci2 miibus1: <MII bus> on xl1 nsphy0: <DP83840 10/100 media interface> PHY 24 on miibus1 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl1: Ethernet address: 00:60:08:6b:45:f2 xl1: [ITHREAD] isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xa800-0xa80f at device 31.1 on pci0 ata0: <ATA channel 0> on atapci1 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci1 ata1: [ITHREAD] uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xa400-0xa41f irq 19 at device 31.2 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb3: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 usb3: USB revision 1.0 uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub3: 2 ports with 2 removable, self powered uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xa000-0xa01f irq 23 at device 31.4 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb4: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1 usb4: USB revision 1.0 uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4 uhub4: 2 ports with 2 removable, self powered sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A sio1: [FILTER] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] cpu0: <ACPI CPU> on acpi0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xd0000-0xdc7ff pnpid ORM0000 on isa0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 ppbus0: [ITHREAD] plip0: <PLIP network interface> on ppbus0 plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2405464112 Hz quality 800 Timecounters tick every 1.000 msec ad0: 238475MB <Hitachi HDP725025GLAT80 GM2OA42A> at ata0-master UDMA100 ad8: 238475MB <Seagate ST3250820A 3.AAE> at ata4-master UDMA100 ad10: 238475MB <Seagate ST3250820A 3.AAE> at ata5-master UDMA100 ar0: 238475MB <Promise Fasttrak RAID1> status: READY ar0: disk0 READY (master) using ad8 at ata4-master ar0: disk1 READY (mirror) using ad10 at ata5-master Trying to mount root from ufs:/dev/ad0s1a <118>Loading configuration files. <118>kernel dumps on /dev/ad0s1b <118>Entropy harvesting: <118> interrupts <118> ethernet <118> point_to_point Fatal trap 12: page fault while in kernel mode cpuid = 0; apic id = 00 fault virtual address = 0xb fault code = supervisor read, page not present instruction pointer = 0x20:0xc0da4de7 stack pointer = 0x28:0xcd1e6aac frame pointer = 0x28:0xcd1e6aac code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 70 (sysctl) trap number = 12 panic: page fault cpuid = 0 Uptime: 1s Physical memory: 243 MB Dumping 27 MB: 12 Reading symbols from /boot/kernel/acpi.ko...Reading symbols from /boot/kernel/acpi.ko.symbols...done. done. Loaded symbols for /boot/kernel/acpi.ko #0 doadump () at pcpu.h:196 196 __asm __volatile("movl %%fs:0,%0" : "=r" (td)); (kgdb) list *0xc0da4de7 0xc0da4de7 is in AcpiNsMapHandleToNode (/usr/src/sys/modules/acpi/acpi/../../../contrib/dev/acpica/nsutils.c:889). 884 return (AcpiGbl_RootNode); 885 } 886 887 /* We can at least attempt to verify the handle */ 888 889 if (ACPI_GET_DESCRIPTOR_TYPE (Handle) != ACPI_DESC_TYPE_NAMED) 890 { 891 return (NULL); 892 } 893 (kgdb) bt #0 doadump () at pcpu.h:196 #1 0xc0790eb7 in boot (howto=260) at /usr/src/sys/kern/kern_shutdown.c:418 #2 0xc0791189 in panic (fmt=Variable "fmt" is not available. ) at /usr/src/sys/kern/kern_shutdown.c:574 #3 0xc0aa339c in trap_fatal (frame=0xcd1e6a6c, eva=11) at /usr/src/sys/i386/i386/trap.c:939 #4 0xc0aa3620 in trap_pfault (frame=0xcd1e6a6c, usermode=0, eva=11) at /usr/src/sys/i386/i386/trap.c:852 #5 0xc0aa3fdc in trap (frame=0xcd1e6a6c) at /usr/src/sys/i386/i386/trap.c:530 #6 0xc0a89e4b in calltrap () at /usr/src/sys/i386/i386/exception.s:159 #7 0xc0da4de7 in AcpiNsMapHandleToNode (Handle=0x7) at /usr/src/sys/modules/acpi/acpi/../../../contrib/dev/acpica/nsutils.c:889 #8 0xc0da44cf in AcpiNsHandleToPathname (TargetHandle=0x7, Buffer=0xcd1e6ae0) at /usr/src/sys/modules/acpi/acpi/../../../contrib/dev/acpica/nsnames.c:320 #9 0xc0db0a72 in acpi_name (handle=0x7) at /usr/src/sys/modules/acpi/acpi/../../../dev/acpica/acpi.c:2842 #10 0xc0db4ca8 in acpi_pci_child_location_str_method (cbdev=0xc2212680, child=0xc2243400, buf=0xc22c2400 "slot=0 function=0 handle=", buflen=1024) at /usr/src/sys/modules/acpi/acpi/../../../dev/acpica/acpi_pci.c:150 #11 0xc07b4ca6 in bus_child_location_str (child=0xc2243400, buf=0xc22c2400 "slot=0 function=0 handle=", buflen=1024) at bus_if.h:604 #12 0xc07b4f49 in device_sysctl_handler (oidp=0xc223f780, arg1=0xc2243400, arg2=2, req=0xcd1e6ba4) at /usr/src/sys/kern/subr_bus.c:256 #13 0xc079a707 in sysctl_root (oidp=Variable "oidp" is not available. ) at /usr/src/sys/kern/kern_sysctl.c:1307
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?43b1bb350904230622u4b7790f0p9f665b649c97a3b>