Date: Sun, 07 Oct 2001 20:49:35 -0400 From: am <A.Muellers@gmx.de> To: mobile@freebsd.org Subject: how to get NIC on HP Pavillion N5430 working? Message-ID: <3BC0F81F.1B5C9177@gmx.de>
next in thread | raw e-mail | index | archive | help
Hi, I can't get my Ethernet working on my notebook. The controller (dc0) is recognized but then the init fails. Before this a couple of "no driver attached" appear on pci0... What does it mean? Does anyone have a working setup/configuration for this HP Pavillion? thanks in advance Andreas here comes the output at startup: Preloaded elf kernel "kernel" at 0xc0470000. Pentium Pro MTRR support enabled Using $PIR table, 8 entries at 0xc00fdf40 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at 0.0 (no driver attached) ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xfff70000-0xfff70fff irq 9 at device 2.0 on pci0 usb0: OHCI version 1.0, legacy support usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pcic0: <TI PCI-1420 PCI-CardBus Bridge> irq 11 at device 4.0 on pci0 pcic0: Memory mapped device, will work. pcic0: PCI Memory allocated: 0x44000000 pcic0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][pci only] pccard0: <PC Card bus (classic)> on pcic0 pcic1: <TI PCI-1420 PCI-CardBus Bridge> irq 11 at device 4.1 on pci0 pcic1: Memory mapped device, will work. pcic1: PCI Memory allocated: 0x44001000 pcic1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][pci only] pccard1: <PC Card bus (classic)> on pcic1 pci0: <bridge, PCI-unknown> at 6.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 pci0: <multimedia, audio> at 8.0 (no driver attached) pci0: <simple comms> at 8.1 (no driver attached) atapci0: <AcerLabs Aladdin ATA33 controller> port 0x1000-0x100f at device 15.0 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 dc0: <Accton EN2242 MiniPCI 10/100BaseTX> irq 11 at device 16.0 on pci0 dc0: failed to enable I/O ports! device_probe_and_attach: dc0 attach returned 6 orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xdc000-0xdffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 atkbd1: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd1 at atkbd1 psm1: unable to allocate the IRQ resource (12). fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 pmtimer0 on isa0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fdc1: cannot reserve I/O port range sio5: configured irq 3 not in bitmap of probed irqs 0 ppc1: parallel port not found. unknown: <PNP0303> can't assign resources unknown: <PNP0c02> can't assign resources unknown: <PNP0501> can't assign resources unknown: <PNP0700> can't assign resources unknown: <PNP0401> can't assign resources ad0: 19077MB <HITACHI_DK23CA-20> [38760/16/63] at ata0-master UDMA66 acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2502> at ata1-master PIO4 Mounting root from ufs:/dev/ad0s3a pccard: card inserted, slot 1 lock order reversal 1st 0xc03fca60 mntvnode @ ../../ufs/ffs/ffs_vfsops.c:1007 2nd 0xc861666c vnode interlock @ ../../ufs/ffs/ffs_vfsops.c:1016 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3BC0F81F.1B5C9177>