Date: Wed, 9 Apr 2014 20:30:01 GMT From: Hans Petter Selasky <hps@selasky.org> To: freebsd-usb@FreeBSD.org Subject: Re: usb/188403: USB3 USB_ERR_TIMEOUT and USB_ERR_STALLED issues Message-ID: <201404092030.s39KU1bT030899@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR usb/188403; it has been noted by GNATS. From: Hans Petter Selasky <hps@selasky.org> To: Jason Seidel <jseidel@unixsystem.org>, freebsd-gnats-submit@FreeBSD.org Cc: Subject: Re: usb/188403: USB3 USB_ERR_TIMEOUT and USB_ERR_STALLED issues Date: Wed, 09 Apr 2014 22:30:15 +0200 On 04/09/14 17:39, Jason Seidel wrote: > >> Number: 188403 >> Category: usb >> Synopsis: USB3 USB_ERR_TIMEOUT and USB_ERR_STALLED issues >> Confidential: no >> Severity: non-critical >> Priority: low >> Responsible: freebsd-usb >> State: open >> Quarter: >> Keywords: >> Date-Required: >> Class: sw-bug >> Submitter-Id: current-users >> Arrival-Date: Wed Apr 09 15:40:00 UTC 2014 >> Closed-Date: >> Last-Modified: >> Originator: Jason Seidel >> Release: Freebsd 10 release/stable and 11.0-current >> Organization: >> Environment: > I have tried this with all current FreeBSD 10 versions. > > FreeBSD nuc 11.0-CURRENT FreeBSD 11.0-CURRENT #1 r264292: Wed Apr 9 10:14:56 EDT 2014 jseidel@nuc:/usr/obj/usr/src/sys/GENERIC i386 > >> Description: > I have an intel NUC D34010WYKH, and there is an issue with the USB3 in release 10 and 11. I was running freebsd 10 release and saw this issuebut i needed to upgrade to stable because release didnt contain the axge driver for a usb network adapter. after updating to stable, the driver was available but the usb errors were still there. I saw some messages about issues like this and that a fix was uploaded, so I went to current to see if it fixed the problem, but the issue was still there. > > usb_alloc_device: set address 5 failed (USB_ERR_TIMEOUT, ignored) > usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_STALLED > Root mount waiting for: usbus1 > usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_TIMEOUT, ignored) > usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_STALLED > Root mount waiting for: usbus1 > Root mount waiting for: usbus1 > usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_TIMEOUT, ignored) > usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_STALLED > Root mount waiting for: usbus1 > usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_TIMEOUT, ignored) > usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_STALLED > Root mount waiting for: usbus1 > Root mount waiting for: usbus1 > usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_TIMEOUT, ignored) > usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_STALLED > > > $ pciconf -lv > hostb0@pci0:0:0:0: class=0x060000 card=0x20548086 chip=0x0a048086 rev=0x09 hdr=0x00 > vendor = 'Intel Corporation' > device = 'Haswell-ULT DRAM Controller' > class = bridge > subclass = HOST-PCI > vgapci0@pci0:0:2:0: class=0x030000 card=0x20548086 chip=0x0a268086 rev=0x09 hdr=0x00 > vendor = 'Intel Corporation' > device = 'Haswell-ULT Integrated Graphics Controller' > class = display > subclass = VGA > hdac0@pci0:0:3:0: class=0x040300 card=0x20548086 chip=0x0a0c8086 rev=0x09 hdr=0x00 > vendor = 'Intel Corporation' > class = multimedia > subclass = HDA > xhci0@pci0:0:20:0: class=0x0c0330 card=0x20548086 chip=0x9c318086 rev=0x04 hdr=0x00 > vendor = 'Intel Corporation' > device = 'Lynx Point-LP USB xHCI HC' > class = serial bus > subclass = USB > none0@pci0:0:22:0: class=0x078000 card=0x20548086 chip=0x9c3a8086 rev=0x04 hdr=0x00 > vendor = 'Intel Corporation' > device = 'Lynx Point-LP HECI' > class = simple comms > em0@pci0:0:25:0: class=0x020000 card=0x20548086 chip=0x15598086 rev=0x04 hdr=0x00 > vendor = 'Intel Corporation' > class = network > subclass = ethernet > hdac1@pci0:0:27:0: class=0x040300 card=0x20548086 chip=0x9c208086 rev=0x04 hdr=0x00 > vendor = 'Intel Corporation' > device = 'Lynx Point-LP HD Audio Controller' > class = multimedia > subclass = HDA > pcib1@pci0:0:28:0: class=0x060400 card=0x20548086 chip=0x9c108086 rev=0xe4 hdr=0x01 > vendor = 'Intel Corporation' > device = 'Lynx Point-LP PCI Express Root Port 1' > class = bridge > subclass = PCI-PCI > pcib2@pci0:0:28:3: class=0x060400 card=0x20548086 chip=0x9c168086 rev=0xe4 hdr=0x01 > vendor = 'Intel Corporation' > device = 'Lynx Point-LP PCI Express Root Port 4' > class = bridge > subclass = PCI-PCI > ehci0@pci0:0:29:0: class=0x0c0320 card=0x20548086 chip=0x9c268086 rev=0x04 hdr=0x00 > vendor = 'Intel Corporation' > device = 'Lynx Point-LP USB EHCI' > class = serial bus > subclass = USB > isab0@pci0:0:31:0: class=0x060100 card=0x20548086 chip=0x9c438086 rev=0x04 hdr=0x00 > vendor = 'Intel Corporation' > device = 'Lynx Point-LP LPC Controller' > class = bridge > subclass = PCI-ISA > ahci0@pci0:0:31:2: class=0x010601 card=0x20548086 chip=0x9c038086 rev=0x04 hdr=0x00 > vendor = 'Intel Corporation' > device = 'Lynx Point-LP SATA Controller 1 [AHCI mode]' > class = mass storage > subclass = SATA > none1@pci0:0:31:3: class=0x0c0500 card=0x20548086 chip=0x9c228086 rev=0x04 hdr=0x00 > vendor = 'Intel Corporation' > device = 'Lynx Point-LP SMBus Controller' > class = serial bus > subclass = SMBus > none2@pci0:2:0:0: class=0x028000 card=0x40708086 chip=0x08b18086 rev=0x73 hdr=0x00 > vendor = 'Intel Corporation' > class = network > > # usbconfig > ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) > ugen0.1: <XHCI root HUB 0x8086> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA) > ugen1.2: <product 0x8000 vendor 0x8087> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) > ugen1.3: <AX88179 ASIX Elec. Corp.> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (248mA) > ugen1.4: <USB Receiver Logitech> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (98mA) > > >> How-To-Repeat: > fresh install of freebsd exibits this issue. >> Fix: > I have gotten it to "somewhat" stabilize by adding hw.usb.xhci.xhci_port_route=-1 into /boot/loader.conf > >> Release-Note: >> Audit-Trail: Hi, Can you try this patch: http://svnweb.freebsd.org/changeset/base/264294 --HPS
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201404092030.s39KU1bT030899>