Date: Mon, 24 Oct 2005 19:59:28 +0200 From: Georg Bege <therion@ninth-art.de> To: =?UTF-8?B?IkFybmUgXCJXw7ZybmVyXCIi?= <arne_woerner@yahoo.com>, freebsd-multimedia@freebsd.org Subject: Re: problems with bktr0 and cheap TV card FlyVideo Message-ID: <435D2100.2090706@ninth-art.de> In-Reply-To: <20051024135913.69403.qmail@web30313.mail.mud.yahoo.com> References: <20051024135913.69403.qmail@web30313.mail.mud.yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Well sorry but I think you all underestimate my problem, if I want to hear plain audio from my tv card then I dont need to set the recording because it isnt about recording. Though I already tried that and I've set the mixer rec source to line and 100 volume. Still nothing, I guess its more complicated then this. Arne "W�������������������������������" wrote: >As far as I remember you should do a ># mixer rec 50 >or so, too... So that the volume is ok... > >Zero is not enough... Family motto... ;-)) > ^^^ that was just a joke... Okay... > >And like it was said correctly: The recording source is to be set >to the right value... > >In my system I can hear the audio signal with and without >recording source set correctly... I mean: I just say "mixer cd 50" >and then I can hear the TV audio signal... But maybe I have a >funny audio card (VIA 8233 or so)... > >-Arne > > >--- Molnár Csaba <csabamolnar@gmail.com> wrote: > > > >>On Monday 24 October 2005 15.31, Georg Bege wrote: >>I don't see the recording source line in your mixer output, like >>in here: >> >>mcsaba@mcsaba$ mixer >>Mixer vol is currently set to 80:80 >>Mixer pcm is currently set to 79:79 >>Mixer speaker is currently set to 75:75 >>Mixer line is currently set to 75:75 >>Mixer mic is currently set to 0:0 >>Mixer cd is currently set to 75:75 >>Mixer rec is currently set to 0:0 >>Mixer ogain is currently set to 50:50 >>Mixer line1 is currently set to 75:75 >>Mixer phin is currently set to 0:0 >>Mixer phout is currently set to 0:0 >>Recording source: mic >> >>If you plugged the audio cable in line in, you should try: >> >>mixer =rec line >> >> >> >>>Thanks for your reply, >>> >>>I connect the audio cable from the tv card in line-in. >>> >>>Arne >>> >>> >"W�������������������������������" > > >>wrote: >> >> >>>>--- Georg Bege <therion@ninth-art.de> wrote: >>>> >>>> >>>>>I've a problem on FreeBSD 6.0-RC1 with an cheap TV card, >>>>> >>>>>bktr0: <BrookTree 878> mem 0xec000000-0xec000fff irq 21 at >>>>>device 10.0 >>>>>on pci2 >>>>>bktr0: [GIANT-LOCKED] >>>>>bktr0: Card has no configuration EEPROM. Cannot determine >>>>> >>>>> >>card >> >> >>>>>make. >>>>>bktr0: IMS TV Turbo, Philips FR1236 NTSC FM tuner. >>>>> >>>>>Im using fxtv with following command: >>>>> >>>>>therion@fortuna ~ % fxtv -inputFormat pal -tunerMode cable >>>>>-defaultInput >>>>>tuner -defaultAudioInput tuner -cableFreqSet weurope >>>>>-mixerChannel line >>>>> >>>>>I got channels and the picture but no audio, >>>>>Im using a Sound Blaster Live! Value (older card) with >>>>> >>>>> >>emu10k1 >> >> >>>>>which >>>>>works perfectly. >>>>>My machine is a Pentium 4 3.0GHz with 1024M DDR-SDRAM. >>>>> >>>>>Here the relevant data of my KERNCONF: >>>>> >>>>># bktr support >>>>>device iicbus >>>>>device iicbb >>>>>device smbus >>>>>device iicsmb >>>>>device bktr >>>>>options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_PAL >>>>> >>>>>Some sysctl entries in /etc/sysctl.conf: >>>>> >>>>>hw.bt848.card=10 >>>>>hw.bt848.tuner=10 >>>>> >>>>>mixer settings: >>>>> >>>>>Mixer vol is currently set to 100:100 >>>>>Mixer pcm is currently set to 81:81 >>>>>Mixer speaker is currently set to 75:75 >>>>>Mixer line is currently set to 95:95 >>>>>Mixer mic is currently set to 0:0 >>>>>Mixer cd is currently set to 75:75 >>>>>Mixer rec is currently set to 0:0 >>>>>Mixer line1 is currently set to 75:75 >>>>>Mixer phin is currently set to 0:0 >>>>>Mixer phout is currently set to 0:0 >>>>>Mixer video is currently set to 75:75 >>>>> >>>>>PS: Soundcard works on GNU/Linux, just wanted to say that it >>>>> >>>>> >>is >> >> >>>>>impossible that the card is broken/damaged. >>>>> >>>>> >>>>Where did you connect the audio connector? To the mic-in, >>>> >>>> >>line-in >> >> >>>>or cd-in? Or does the TV card send the audio data via PCI to >>>> >>>> >>the >> >> >>>>bktr driver? >>>> >>>>My pinnacle TV card sends the audio data via a cable to the >>>> >>>> >>cd-in >> >> >>>>connector... >>>> >>>>-Arne >>>> >>>> >>>> >>>> >>>>__________________________________ >>>>Start your day with Yahoo! - Make it your home page! >>>>http://www.yahoo.com/r/hs >>>> >>>> >>>_______________________________________________ >>>freebsd-multimedia@freebsd.org mailing list >>>http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia >>>To unsubscribe, send any mail to >>>"freebsd-multimedia-unsubscribe@freebsd.org" >>> >>> >>_______________________________________________ >>freebsd-multimedia@freebsd.org mailing list >>http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia >>To unsubscribe, send any mail to >>"freebsd-multimedia-unsubscribe@freebsd.org" >> >> >> > > > > >__________________________________ >Yahoo! FareChase: Search multiple travel sites in one click. >http://farechase.yahoo.com > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?435D2100.2090706>