Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 3 Mar 2003 02:27:55 +0800
From:      leafy <leafy@leafy.idv.tw>
To:        freebsd-current@FreeBSD.ORG
Subject:   Re: distributed folding client panics -current
Message-ID:  <20030302182755.GA847@leafy.idv.tw>
In-Reply-To: <20030302120934.GB30881@rot13.obsecurity.org>
References:  <20030302053103.GA566@leafy.idv.tw> <20030302120934.GB30881@rot13.obsecurity.org>

next in thread | previous in thread | raw e-mail | index | archive | help

--SkvwRMAIpAhPCcCJ
Content-Type: multipart/mixed; boundary="9jxsPFA5p3P2qPhR"
Content-Disposition: inline


--9jxsPFA5p3P2qPhR
Content-Type: text/plain; charset=big5
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

On Sun, Mar 02, 2003 at 04:09:34AM -0800, Kris Kennaway wrote:
> This may already be fixed..can you try updating and see if the problem pe=
rsists?
>=20
> Kris
I got it again right after the client checks for new version. The world is =
about 1.5hrs old.

Attached the kernel dump=20

Jiawei Ye


--=20
"Without the userland, the kernel is useless."
                                     --inspired by The Tao of Programming
--9jxsPFA5p3P2qPhR
Content-Type: text/plain; charset=big5
Content-Disposition: attachment; filename=output
Content-Transfer-Encoding: quoted-printable

Copyright 2002 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain condition=
s.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB.  Type "show warranty" for details.
This GDB was configured as "i386-undermydesk-freebsd"...
panic: bdwrite: buffer is not busy
panic messages:
---
Fatal trap 12: page fault while in kernel mode
fault virtual address	=3D 0x20
fault code		=3D supervisor read, page not present
instruction pointer	=3D 0x8:0xc01b2036
stack pointer	        =3D 0x10:0xcd32da90
frame pointer	        =3D 0x10:0xcd32dab4
code segment		=3D base 0x0, limit 0xfffff, type 0x1b
			=3D DPL 0, pres 1, def32 1, gran 1
processor eflags	=3D interrupt enabled, resume, IOPL =3D 0
current process		=3D 14 (swi1: net)
trap number		=3D 12
panic: page fault

syncing disks, buffers remaining... panic: bwrite: buffer is not busy???
Uptime: 10h44m40s
Dumping 255 MB
ata0: resetting devices ..
done
 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240
Dump complete
Terminate ACPI
Automatic reboot in 15 seconds - press a key on the console to abort
Rebooting...
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Sun Mar  2 02:22:20 CST 2003
    leafy@leafy.idv.tw:/usr/obj/usr/src/sys/CHIHIRO
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0420000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04200a8.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 1794555904 Hz
CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz (1794.56-MHz 686-class CPU)
  Origin =3D "GenuineIntel"  Id =3D 0xf12  Stepping =3D 2
  Features=3D0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA=
,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory  =3D 268369920 (255 MB)
avail memory =3D 256139264 (244 MB)
Allocating major#253 to "net"
Pentium Pro MTRR support enabled
Allocating major#252 to "pci"
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AMIINT AMIINT10> on motherboard
    ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
    ACPI-0625: *** Info: GPE Block1 defined as GPE16 to GPE31
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00f7550
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82850 host to AGP bridge> mem 0xe8000000-0xebffffff at device =
0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
rl0: <RealTek 8139 10/100BaseTX> port 0xbc00-0xbcff mem 0xefefff00-0xefefff=
ff irq 10 at device 1.0 on pci2
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mo=
de
rl0: Ethernet address: 00:40:95:07:53:6b
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xb800-0xb81f mem 0xefd00000-0=
xefdfffff,0xe76ff000-0xe76fffff irq 12 at device 2.0 on pci2
fxp0: Ethernet address 00:90:27:13:a4:48
inphy0: <i82555 10/100 media interface> on miibus1
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib3: <PCI-PCI bridge> at device 4.0 on pci2
pci3: <PCI bus> on pcib3
asr0: <Adaptec Caching SCSI RAID> mem 0xe4000000-0xe5ffffff irq 9 at device=
 4.1 on pci2
asr0: major=3D154
asr0: DPT PM1564U3 FW Rev. 3013, 1 channel, 256 CCBs, Protocol I2O
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port 0xff00-0xff0f at device 31.1 =
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, USB> at device 31.2 (no driver attached)
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <serial bus, USB> at device 31.4 (no driver attached)
acpi_button1: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
fdc0: cmd 3 failed at out byte 1 of 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: cmd 3 failed at out byte 1 of 3
orm0: <Option ROMs> at iomem 0xe0000-0xe0fff,0xcc000-0xccfff,0xc0000-0xcbff=
f on isa0
pmtimer0 on isa0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7=
,0x3f0-0x3f5 irq 6 drq 2 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ad0: 12949MB <IBM-DJNA-371350> [26310/16/63] at ata0-master UDMA66
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped

syncing disks, buffers remaining... 7 7=20
done
Uptime: 12h43m54s
Terminate ACPI
Rebooting...
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Mon Mar  3 01:28:16 CST 2003
    leafy@leafy.idv.tw:/usr/obj/usr/src/sys/CHIHIRO
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0420000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04200a8.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 1794553556 Hz
CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz (1794.55-MHz 686-class CPU)
  Origin =3D "GenuineIntel"  Id =3D 0xf12  Stepping =3D 2
  Features=3D0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA=
,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory  =3D 268369920 (255 MB)
avail memory =3D 256139264 (244 MB)
Allocating major#253 to "net"
Pentium Pro MTRR support enabled
Allocating major#252 to "pci"
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AMIINT AMIINT10> on motherboard
    ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
    ACPI-0625: *** Info: GPE Block1 defined as GPE16 to GPE31
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00f7550
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82850 host to AGP bridge> mem 0xe8000000-0xebffffff at device =
0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
rl0: <RealTek 8139 10/100BaseTX> port 0xbc00-0xbcff mem 0xefefff00-0xefefff=
ff irq 10 at device 1.0 on pci2
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mo=
de
rl0: Ethernet address: 00:40:95:07:53:6b
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xb800-0xb81f mem 0xefd00000-0=
xefdfffff,0xe76ff000-0xe76fffff irq 12 at device 2.0 on pci2
fxp0: Ethernet address 00:90:27:13:a4:48
inphy0: <i82555 10/100 media interface> on miibus1
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib3: <PCI-PCI bridge> at device 4.0 on pci2
pci3: <PCI bus> on pcib3
asr0: <Adaptec Caching SCSI RAID> mem 0xe4000000-0xe5ffffff irq 9 at device=
 4.1 on pci2
asr0: major=3D154
asr0: DPT PM1564U3 FW Rev. 3013, 1 channel, 256 CCBs, Protocol I2O
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port 0xff00-0xff0f at device 31.1 =
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, USB> at device 31.2 (no driver attached)
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <serial bus, USB> at device 31.4 (no driver attached)
acpi_button1: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
fdc0: cmd 3 failed at out byte 1 of 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: cmd 3 failed at out byte 1 of 3
orm0: <Option ROMs> at iomem 0xe0000-0xe0fff,0xcc000-0xccfff,0xc0000-0xcbff=
f on isa0
pmtimer0 on isa0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7=
,0x3f0-0x3f5 irq 6 drq 2 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ad0: 12949MB <IBM-DJNA-371350> [26310/16/63] at ata0-master UDMA66
Mounting root from ufs:/dev/ad0s1a
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped

syncing disks, buffers remaining... 23 23=20
done
Uptime: 5m32s
Terminate ACPI
Rebooting...
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Mon Mar  3 01:28:16 CST 2003
    leafy@leafy.idv.tw:/usr/obj/usr/src/sys/CHIHIRO
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0420000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04200a8.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 1794553612 Hz
CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz (1794.55-MHz 686-class CPU)
  Origin =3D "GenuineIntel"  Id =3D 0xf12  Stepping =3D 2
  Features=3D0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA=
,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory  =3D 268369920 (255 MB)
avail memory =3D 256139264 (244 MB)
Allocating major#253 to "net"
Pentium Pro MTRR support enabled
Allocating major#252 to "pci"
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AMIINT AMIINT10> on motherboard
    ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
    ACPI-0625: *** Info: GPE Block1 defined as GPE16 to GPE31
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00f7550
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82850 host to AGP bridge> mem 0xe8000000-0xebffffff at device =
0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
rl0: <RealTek 8139 10/100BaseTX> port 0xbc00-0xbcff mem 0xefefff00-0xefefff=
ff irq 10 at device 1.0 on pci2
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mo=
de
rl0: Ethernet address: 00:40:95:07:53:6b
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xb800-0xb81f mem 0xefd00000-0=
xefdfffff,0xe76ff000-0xe76fffff irq 12 at device 2.0 on pci2
fxp0: Ethernet address 00:90:27:13:a4:48
inphy0: <i82555 10/100 media interface> on miibus1
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib3: <PCI-PCI bridge> at device 4.0 on pci2
pci3: <PCI bus> on pcib3
asr0: <Adaptec Caching SCSI RAID> mem 0xe4000000-0xe5ffffff irq 9 at device=
 4.1 on pci2
asr0: major=3D154
asr0: DPT PM1564U3 FW Rev. 3013, 1 channel, 256 CCBs, Protocol I2O
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port 0xff00-0xff0f at device 31.1 =
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, USB> at device 31.2 (no driver attached)
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <serial bus, USB> at device 31.4 (no driver attached)
acpi_button1: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
fdc0: cmd 3 failed at out byte 1 of 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: cmd 3 failed at out byte 1 of 3
orm0: <Option ROMs> at iomem 0xe0000-0xe0fff,0xcc000-0xccfff,0xc0000-0xcbff=
f on isa0
pmtimer0 on isa0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7=
,0x3f0-0x3f5 irq 6 drq 2 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ad0: 12949MB <IBM-DJNA-371350> [26310/16/63] at ata0-master UDMA66
Mounting root from ufs:/dev/ad0s1a


Fatal trap 12: page fault while in kernel mode
fault virtual address	=3D 0x20
fault code		=3D supervisor read, page not present
instruction pointer	=3D 0x8:0xc01b1fc6
stack pointer	        =3D 0x10:0xcd32da90
frame pointer	        =3D 0x10:0xcd32dab4
code segment		=3D base 0x0, limit 0xfffff, type 0x1b
			=3D DPL 0, pres 1, def32 1, gran 1
processor eflags	=3D interrupt enabled, resume, IOPL =3D 0
current process		=3D 14 (swi1: net)
trap number		=3D 12
panic: page fault

syncing disks, buffers remaining... panic: bdwrite: buffer is not busy
Uptime: 44s
Dumping 255 MB
ata0: resetting devices ..
done
 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240
---
#0  doadump () at /usr/src/sys/kern/kern_shutdown.c:239
239		dumping++;
(kgdb) where
#0  doadump () at /usr/src/sys/kern/kern_shutdown.c:239
#1  0xc01bc4a9 in boot (howto=3D260) at /usr/src/sys/kern/kern_shutdown.c:3=
71
#2  0xc01bc713 in panic () at /usr/src/sys/kern/kern_shutdown.c:542
#3  0xc0200fcd in bdwrite (bp=3D0xc77b77e8) at /usr/src/sys/kern/vfs_bio.c:=
994
#4  0xc025afb7 in ffs_update (vp=3D0xc2743490, waitfor=3D0)
    at /usr/src/sys/ufs/ffs/ffs_inode.c:125
#5  0xc027028f in ffs_fsync (ap=3D0xcd32d898)
    at /usr/src/sys/ufs/ffs/ffs_vnops.c:314
#6  0xc026f217 in ffs_sync (mp=3D0xc25b9a00, waitfor=3D2, cred=3D0xc0eb5e80=
,=20
    td=3D0xc0316900) at vnode_if.h:612
#7  0xc02171bb in sync (td=3D0xc0316900, uap=3D0x0)
    at /usr/src/sys/kern/vfs_syscalls.c:138
#8  0xc01bc08c in boot (howto=3D256) at /usr/src/sys/kern/kern_shutdown.c:2=
80
#9  0xc01bc713 in panic () at /usr/src/sys/kern/kern_shutdown.c:542
#10 0xc02c9d52 in trap_fatal (frame=3D0xcd32da50, eva=3D0)
    at /usr/src/sys/i386/i386/trap.c:843
#11 0xc02c9a32 in trap_pfault (frame=3D0xcd32da50, usermode=3D0, eva=3D32)
    at /usr/src/sys/i386/i386/trap.c:757
#12 0xc02c9520 in trap (frame=3D
      {tf_fs =3D -1058209768, tf_es =3D -852361200, tf_ds =3D -1071382512, =
tf_edi =3D -1058255824, tf_esi =3D 0, tf_ebp =3D -852305228, tf_isp =3D -85=
2305284, tf_ebx =3D -1070444276, tf_edx =3D -1058255824, tf_ecx =3D -103411=
5024, tf_eax =3D 1, tf_trapno =3D 12, tf_err =3D 0, tf_eip =3D -1071964218,=
 tf_cs =3D 8, tf_eflags =3D 66050, tf_esp =3D 16, tf_s---Type <return> to c=
ontinue, or q <return> to quit---
s =3D -1071351744}) at /usr/src/sys/i386/i386/trap.c:444
#13 0xc02b96b8 in calltrap () at {standard input}:96
#14 0xc0242649 in tcp_input (m=3D0xc0ec4c30, off0=3D20)
    at /usr/src/sys/netinet/tcp_input.c:2324
#15 0xc023bc06 in ip_input (m=3D0xc0ed4900)
    at /usr/src/sys/netinet/ip_input.c:947
#16 0xc023bcf2 in ipintr () at /usr/src/sys/netinet/ip_input.c:965
#17 0xc022d6c3 in swi_net (dummy=3D0x0) at /usr/src/sys/net/netisr.c:97
#18 0xc01a8301 in ithread_loop (arg=3D0xc0ec2100)
    at /usr/src/sys/kern/kern_intr.c:536
#19 0xc01a71f3 in fork_exit (callout=3D0xc01a8130 <ithread_loop>, arg=3D0x0=
,=20
    frame=3D0x0) at /usr/src/sys/kern/kern_fork.c:871
(kgdb) quit
root@leafy:/var/crash# root@leafy:/var/crash# root@leafy:/var/crash# eroot@=
leafy:/var/crash# eroot@leafy:/var/crash# exroot@leafy:/var/crash# exroot@l=
eafy:/var/crash# exiroot@leafy:/var/crash# exiroot@leafy:/var/crash# exitro=
ot@leafy:/var/crash# exit
exit

Script done on Mon Mar  3 02:22:56 2003

--9jxsPFA5p3P2qPhR--

--SkvwRMAIpAhPCcCJ
Content-Type: application/pgp-signature
Content-Disposition: inline

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (FreeBSD)

iD4DBQE+Yk0rvVncUyjPAegRAmzSAKCREXjkFwQOvjNYXtmROOsYc6aJLQCY09/3
glQ3xa9G6FOXabfHNUp3fA==
=IZnd
-----END PGP SIGNATURE-----

--SkvwRMAIpAhPCcCJ--

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030302182755.GA847>