Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 5 Jun 2008 18:30:00 +0100
From:      "Chris Rees" <utisoft@googlemail.com>
To:        freebsd-stable@freebsd.org
Subject:   Re: challenge: end of life for 6.2 is premature with buggy 6.3
Message-ID:  <b79ecaef0806051030i142447f2ke3b6b3d92650dc3c@mail.gmail.com>

next in thread | raw e-mail | index | archive | help
On Thursday, June 05, 2008 10:23:55 -0400 John Baldwin <jhb@freebsd.org>
> wrote:

> I'm glad to hear that.  I have a server that uses bce, and it was completely
> non-functional until I hunted down some beta code that made it usable.  I'd
> like to upgrade, but this is a critical server with no redundancy (and it's a
> hobby site with no money to pay for expensive support), and I'm not about to
> upgrade unless I know for certain the problems won't reoccur, because I have to
> upgrade remotely and pay money if the system goes down.
>
> The problems with that driver were bad enough when the server was being
> configured in my study.  (The system would lock up, and only a hard reboot
> would restore networking.)  It would be hell trying to troubleshoot problems if
> I had to drive the 45 miles to the hosting site and spend a night there trying
> to get the server back up, then go to work the next day.
>
> # uname -a
> FreeBSD www.stovebolt.com 6.1-RELEASE-p10 FreeBSD 6.1-RELEASE-p10 #2: Mon Oct
> 16 15:38:02 CDT 2006     root@www.stovebolt.com:/usr/obj/usr/src/sys/GENERIC
> i386
>
> # grep bce /var/run/dmesg.boot
> bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B1), v0.9.6> mem
> 0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci9
> bce0: ASIC ID 0x57081010; Revision (B1); PCI-X 64-bit 133MHz
> miibus0: <MII bus> on bce0
> bce0: Ethernet address: 00:13:72:fb:2a:ad
> bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B1), v0.9.6> mem
> 0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci5
> bce1: ASIC ID 0x57081010; Revision (B1); PCI-X 64-bit 133MHz
> miibus1: <MII bus> on bce1
> bce1: Ethernet address: 00:13:72:fb:2a:ab
>
> # grep bce0 /var/log/messages
> May  2 09:10:31 www kernel: bce0: link state changed to DOWN
> May  2 09:10:39 www kernel: bce0: link state changed to UP
> May 25 07:49:49 www kernel: bce0: link state changed to DOWN
> May 25 07:50:31 www kernel: bce0: link state changed to UP
> May 26 21:28:36 www kernel: bce0: link state changed to DOWN
> May 26 21:28:40 www kernel: bce0: link state changed to UP
> May 27 13:13:21 www kernel: bce0: link state changed to DOWN
> May 27 13:13:31 www kernel: bce0: link state changed to UP
>
> It's been like that since the server was installed.
>
> So, if I upgrade to 6.3 or 7.0, am I still going to experience these problems?
> Is the server going to stop working entirely?  How can I know that for sure
> before starting an upgrade?

Damn, that's fascinating. I get that with nfe, on my xbox;


amnesiac# uname -a
FreeBSD amnesiac.bayofrum.net 7.0-RELEASE-p1 FreeBSD 7.0-RELEASE-p1
#9: Wed May 28 23:14:21 BST 2008
root@amnesiac.bayofrum.net:/usr/obj/usr/src/sys/AMNESIAC  i386


amnesiac# uptime
 6:27PM  up 7 days, 18:53, 1 user, load averages: 0.00, 0.05, 0.06


amnesiac# tail /var/log/messages
Jun  3 17:39:31 amnesiac kernel: pid 37682 (python), uid 80 inumber
871485 on /usr/spare: filesystem full
Jun  4 17:07:24 amnesiac kernel: nfe0: link state changed to DOWN
Jun  4 17:07:34 amnesiac kernel: nfe0: link state changed to UP
Jun  4 17:07:40 amnesiac kernel: nfe0: link state changed to DOWN
Jun  4 17:07:54 amnesiac kernel: nfe0: link state changed to UP
Jun  4 18:39:50 amnesiac kernel: nfe0: link state changed to DOWN
Jun  4 18:40:01 amnesiac kernel: nfe0: link state changed to UP
Jun  4 18:40:07 amnesiac kernel: nfe0: link state changed to DOWN
Jun  4 18:40:21 amnesiac kernel: nfe0: link state changed to UP
Jun  5 18:26:58 amnesiac sudo:    chris : TTY=ttyp0 ;
PWD=/usr/home/chris ; USER=root ; COMMAND=/usr/bin/su


Hm, I swear that's getting more regular. Anyway, it hasn't lost
permanantly yet, but I was just ignoring them (my Linux background
:$). Should I be worried??

I'll provide any other details if anyone's interested.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?b79ecaef0806051030i142447f2ke3b6b3d92650dc3c>