Date: Sun, 26 Sep 2010 20:20:29 +0200 From: David DEMELIER <demelier.david@gmail.com> To: Andriy Gapon <avg@icyb.net.ua> Cc: freebsd-stable <freebsd-stable@freebsd.org>, Jeremy Chadwick <freebsd@jdc.parodius.com> Subject: Re: Failure to burn with ahci mode. Message-ID: <AANLkTim3tSQbZU%2B74M_%2BZqG0VRNYuoUu4=kh9Fs3SiWL@mail.gmail.com> In-Reply-To: <4C9F8876.1040007@icyb.net.ua> References: <AANLkTimH41m7Vckd3bCq%2BuwX_79sY7dP%2B0ZbwpnrJAkc@mail.gmail.com> <4C9F16F9.50707@icyb.net.ua> <AANLkTimAXa=1bas_GgvzRbPwzuSUn-VQHX9jWm0mRo50@mail.gmail.com> <20100926103836.GA33415@owl.midgard.homeip.net> <AANLkTimqTJbbc_45yLvGz93jPRm1k4YNkzzxvw%2BsE6n0@mail.gmail.com> <20100926172527.GA38405@icarus.home.lan> <AANLkTikcMOrOctSrsUPYH%2BMc562-putxO8s94xgtVHpy@mail.gmail.com> <4C9F8876.1040007@icyb.net.ua>
next in thread | previous in thread | raw e-mail | index | archive | help
2010/9/26 Andriy Gapon <avg@icyb.net.ua>: > on 26/09/2010 20:37 David DEMELIER said the following: >> markand@Melon ~ $ sudo camcontrol devlist >> <WDC WD3200BEKT-60F3T1 12.01A12> =C2=A0 at scbus0 target 0 lun 0 (ada0) >> <hp DVDRAM GT20L DC05> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 at scbu= s1 target 0 lun 0 (cd0) >> >> markand@Melon ~ $ sudo cdrecord downloads/FreeBSD-8.1-RELEASE-amd64-live= fs.iso >> cdrecord: No write mode specified. >> cdrecord: Assuming -sao mode. >> cdrecord: If your drive does not accept -sao, try -tao. >> cdrecord: Future versions of cdrecord may have different drive >> dependent defaults. >> Cdrecord-ProDVD-ProBD-Clone 3.00 (amd64-unknown-freebsd8.1) Copyright >> (C) 1995-2010 J=C3=B6rg Schilling >> cdrecord: Error 0. Cannot open or use SCSI driver. >> cdrecord: For possible targets try 'cdrecord -scanbus'. >> cdrecord: For possible transport specifiers try 'cdrecord dev=3Dhelp'. >> >> markand@Melon ~ $ sudo cdrecord -scanbus >> Cdrecord-ProDVD-ProBD-Clone 3.00 (amd64-unknown-freebsd8.1) Copyright >> (C) 1995-2010 J=C3=B6rg Schilling >> cdrecord: Error 0. Cannot open or use SCSI driver. >> cdrecord: For possible targets try 'cdrecord -scanbus'. >> cdrecord: For possible transport specifiers try 'cdrecord dev=3Dhelp'. > > Doesn't look like you have xpt and pass devices in your kernel, which are > (almost) mandatory when use CAM-based drivers. > Not sure if ahci(4) mentions this. > > -- > Andriy Gapon > Everything works now=E2=80=A6 Sorry for the noise ! We can close the PR too. --=20 Demelier David
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?AANLkTim3tSQbZU%2B74M_%2BZqG0VRNYuoUu4=kh9Fs3SiWL>