Date: Mon, 10 Sep 2007 23:50:08 -0400 From: Eric Ekong <eric@unixtechs.org> To: freebsd-questions@freebsd.org Subject: Re: nvidia-driver rebooting machine on X startup Message-ID: <20070911035008.GA1629@blackguy> In-Reply-To: <200709081659.32603.fbsd.questions@rachie.is-a-geek.net> References: <839aec700709061310m44a1f0f8p55fd7706ed3c02af@mail.gmail.com> <200709072045.58773.fbsd.questions@rachie.is-a-geek.net> <839aec700709071543l241ec6bck8f37712f4dbd4011@mail.gmail.com> <200709081659.32603.fbsd.questions@rachie.is-a-geek.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Same driver different hw, same os version...
blackguy# cat /etc/sysctl.conf
security.bsd.see_other_uids=0
net.link.ether.inet.log_arp_wrong_iface=0
net.inet6.ip6.v6only=0
kern.ipc.shmall=32768
kern.ipc.shmmax=67108864
vfs.usermount=1
FreeBSD blackguy.unixtechs.org 6.2-STABLE FreeBSD 6.2-STABLE #22: Mon
Aug 13 23:00:44 EDT 2007
root@blackguy.unixtechs.org:/usr/obj/usr/src/sys/BLACKGUY i386
blackguy# dmesg
~
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
The Regents of the University of California. All rights
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE #22: Mon Aug 13 23:00:44 EDT 2007
root@blackguy.unixtechs.org:/usr/obj/usr/src/sys/BLACKGUY
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) XP 3000+ (2162.74-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x6a0 Stepping = 0
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400800<SYSCALL,MMX+,3DNow+,3DNow>
real memory = 3221159936 (3071 MB)
avail memory = 3142520832 (2996 MB)
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413,
RF5413)
acpi0: <Nvidia AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
Correcting nForce2 C1 CPU disconnect hangs
agp0: <NVIDIA nForce2 AGP Controller> mem 0xe0000000-0xe3ffffff at
device 0.0 on pci0
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xe8001000-0xe8001fff irq 11
at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xe8002000-0xe8002fff irq 4
at device 2.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0: <NVIDIA nForce2 USB 2.0 controller> mem 0xe8003000-0xe80030ff
irq 3 at device 2.2 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <NVIDIA nForce2 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
nve0: <NVIDIA nForce MCP2 Networking Adapter> port 0xe000-0xe007 mem
0xe8000000-0xe8000fff irq 10 at device 4.0 on pci0
nve0: Ethernet address 00:11:2f:b5:c2:41
miibus0: <MII bus> on nve0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
nve0: Ethernet address: 00:11:2f:b5:c2:41
pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0
pci1: <ACPI PCI bus> on pcib1
rl0: <RealTek 8139 10/100BaseTX> port 0xd000-0xd0ff mem
0xe7010000-0xe70100ff irq 11 at device 7.0 on pci1
miibus1: <MII bus> on rl0
rlphy1: <RealTek internal media interface> on miibus1
rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:50:ba:44:04:89
ath0: <Atheros 5212> mem 0xe7000000-0xe700ffff irq 5 at device 8.0 on
pci1
ath0: Ethernet address: 00:12:17:6c:5f:0d
ath0: mac 5.9 phy 4.3 radio 3.6
pcm0: <Creative CT5880-C> port 0xd400-0xd43f irq 7 at device 9.0 on
pci1
pcm0: <TriTech TR28602 AC97 Codec>
pcm0: <Playback: DAC2 / Record: ADC>
atapci0: <nVidia nForce2 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 9.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
nvidia0: <Unknown> mem
0xe4000000-0xe4ffffff,0xd0000000-0xdfffffff,0xe5000000-0xe5ffffff irq
11 at device 0.0 on pci2
nvidia0: [GIANT-LOCKED]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd3fff,0xd4000-0xd57ff on
isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
ums0: Kensington Kensington Expert Mouse, rev 1.10/1.00, addr 2, iclass
3/1
ums0: 4 buttons and Z dir.
ukbd0: Microsoft Natural\M-. Ergonomic Keyboard 4000, rev 2.00/1.73,
addr 3, iclass 3/1
kbd1 at ukbd0
uhid0: Microsoft Natural\M-. Ergonomic Keyboard 4000, rev 2.00/1.73,
addr 3, iclass 3/1
Timecounter "TSC" frequency 2162742160 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 194481MB <Maxtor 6L200R0 BAH41E00> at ata0-master UDMA133
ad1: 286188MB <Maxtor 6B300R0 BAH41B10> at ata0-slave UDMA133
ad2: 114473MB <WDC WD1200BB-00CAA1 17.07W17> at ata1-master UDMA100
acd0: DVDR <PLEXTOR DVDR PX-716A/1.04> at ata1-slave UDMA66
Trying to mount root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
WARNING: /backup was not properly dismounted
WARNING: /home was not properly dismounted
WARNING: /mp3 was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
/var: mount pending error: blocks 4 files 1
WARNING: /prod was not properly dismounted
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
cd0 at ata1 bus 0 target 1 lun 0
cd0: <PLEXTOR DVDR PX-716A 1.04> Removable CD-ROM SCSI-0 device
cd0: 66.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
- tray closed
blackguy# cat /etc/X11/xorg.conf
~
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (root@blackguy.unixtechs.org) Sat Nov
# 4 19:30:36 EST 2006
##Section "DRI"
# Group 0
# #Group 438
# Mode 0666
#EndSection
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen 0" 0 0
Screen "Screen 1" LeftOf "Screen 0"
InputDevice "Microsoft_Natural" "CoreKeyboard"
InputDevice "Microsoft Intellimouse Explorer" "CorePointer"
Option "Xinerama" "true"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/local/lib/xorg/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/URW"
FontPath "/usr/X11R6/lib/X11/fonts/freefont"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
EndSection
Section "Module"
# Load "dri"
Load "glx"
Load "extmod"
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the
DGA extension
EndSubSection
EndSection
Section "ServerFlags"
Option "allowmouseopenfail"
Option "NoPM"
Option "TvOut" "off"
EndSection
Section "InputDevice"
Identifier "Microsoft_Natural"
Driver "kbd"
Option "AutoRepeat" "500 30"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbRules" "xfree86"
EndSection
Section "InputDevice"
Identifier "Microsoft Intellimouse Explorer"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/sysmouse"
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"
Option "Resolution" "1600"
Option "CursorShadow" "True"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "UltraSharp 2001FP LCD"
ModelName "Dell"
HorizSync 30.0 - 130.0
VertRefresh 50.0 - 200.0
Option "dpms"
#DisplaySize 1600 1200
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "UltraSharp 2001FP LCD"
ModelName "Dell"
HorizSync 30.0 - 130.0
VertRefresh 50.0 - 200.0
Option "dpms"
EndSection
Section "Device"
Identifier "GeForce 6600GT_0"
Driver "nvidia"
VendorName "Matrox Graphics, Inc."
BusID "PCI:2:0:0"
Screen 0
EndSection
Section "Device"
Identifier "GeForce 6600GT_1"
Driver "nvidia"
VendorName "Matrox Graphics, Inc."
BusID "PCI:2:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen 0"
Device "GeForce 6600GT_0"
Monitor "monitor0"
DefaultDepth 24
DefaultFbBPP 32
Option "HWcursor" "off"
Option "DPMS" "on"
Option "DigitalScreen1" "on"
Option "Busmastering" "on"
Option "XFB" "on"
Option "AddARGBGLXVisuals" "on"
Option "Composite" "on"
SubSection "Display"
#Modes "1920x1440" "1600x1200" "1280x1024"
"1024x768" "800x600" "640x480"
Depth 8
Modes "1600x1200" "1280x1024" "1024x768" "800x600"
"640x480"
EndSubSection
SubSection "Display"
#Modes "1920x1440" "1600x1200" "1280x1024" "1024x768"
"800x600" "640x480"
Depth 16
Modes "1600x1200" "1280x1024" "1024x768" "800x600"
"640x480"
EndSubSection
SubSection "Display"
#Modes "1920x1440" "1600x1200" "1280x1024" "1024x768"
"800x600" "640x480"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600"
"640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen 1"
Device "GeForce 6600GT_1"
Monitor "monitor1"
DefaultDepth 24
DefaultFbBPP 32
Option "HWcursor" "off"
Option "DPMS" "on"
Option "DigitalScreen2" "on"
Option "Busmastering" "on"
Option "XFB" "on"
Option "AddARGBGLXVisuals" "on"
Option "Composite" "on"
SubSection "Display"
#Modes "1920x1440" "1600x1200" "1280x1024"
"1024x768" "800x600" "640x480"
Depth 8
Modes "1600x1200" "1280x1024" "1024x768" "800x600"
"640x480"
EndSubSection
SubSection "Display"
#Modes "1920x1440" "1600x1200" "1280x1024"
"1024x768" "800x600" "640x480"
Depth 16
Modes "1600x1200" "1280x1024" "1024x768" "800x600"
"640x480"
EndSubSection
SubSection "Display"
#Modes "1920x1440" "1600x1200" "1280x1024" "1024x768"
"800x600" "640x480"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600"
"640x480"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "enable"
EndSection
X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: FreeBSD 6.2-STABLE i386
Current Operating System: FreeBSD blackguy.unixtechs.org 6.2-STABLE
FreeBSD 6.2-STABLE #22: Mon Aug 13 23:00:44 EDT 2007
root@blackguy.unixtechs.org:/usr/obj/usr/src/sys/BLACKGUY i386
Build Date: 31 August 2007
Eric
* Mel <fbsd.questions@rachie.is-a-geek.net> [070908 10:59]:
> Date: Sat, 8 Sep 2007 16:59:32 +0200
> From: Mel <fbsd.questions@rachie.is-a-geek.net>
> To: freebsd-questions@freebsd.org
> Subject: Re: nvidia-driver rebooting machine on X startup
>
> On Saturday 08 September 2007 00:43:59 Darren Spruell wrote:
> > On 9/7/07, Mel <fbsd.questions@rachie.is-a-geek.net> wrote:
> > > On Friday 07 September 2007 19:43:03 Darren Spruell wrote:
> > > > On 9/6/07, Derek Ragona <derek@computinginnovations.com> wrote:
> > > > > At 03:10 PM 9/6/2007, Darren Spruell wrote:
> > > > >
> > > > > Wondering if this is a known issue, or if anyone has suggestions to
> > > > > get it working...?
> > > > >
> > > > > Running FreeBSD 6.2-RELEASE-p4 SMP i386.
> > > > >
> > > > > I installed nvidia-driver-100.14.11 from ports (Sep. 5 snapshot),
> > > > > Linux compatibility enabled. After loading modules 'linux' and
> > > > > 'nvidia', I do:
> > > > >
> > > > > # X -configure
> > > > > # X -config /root/xorg.conf.new
> > > > >
> > > > > At this point the system spontaneously reboots. 'X -configure' runs
> > > > > fine and produces a configuration without issue, but the reboot
> > > > > occcurs when launching X. Nothing is output to screen (it flickers
> > > > > as if starting X), and nothing is written to /var/log/Xorg.0.log. I
> > > > > do get the same behavior if running 'xorgcfg'.
> > > > >
> > > > > Card info:
> > > > >
> > > > > "NV41 [Quadro FX 3450/4000 SDI] rev 162"
> > > > >
> > > > > nvidia0@pci7:0:0: class=0x030000 card=0x029b10de chip=0x00cd10de
> > > > > rev=0xa2 hdr=0x00
> > > > > vendor = 'NVIDIA Corporation'
> > > > > class = display
> > > > > subclass = VGA
> > > > >
> > > > > I've tried an alternate version of the binary driver
> > > > > (nvidia-driver-96xx) to see if there was any change, and it also
> > > > > reboots on X startup.
> > > > >
> > > > >
> > > > > --
> > > > > Check your AGP settings and consult the readme, chapter 9, for the
> > > > > latest driver. You should be running the latest driver with your
> > > > > card.
> > > > >
> > > > > Make sure you have the correct AGP settings, either letting FreeBSD
> > > > > do it in the kernel or disable the kernel and let the Nvidia driver
> > > > > manage it.
> > > >
> > > > So, I'm not having terrific luck with any combination of settings I
> > > > try.
> > > >
> > > > The latest FreeBSD driver release from Nvidia is the same as the
> > > > version in the ports tree. This is what I've installed.
> > > >
> > > > Attempting the AGPGART route (building the driver with
> > > > "WITH_FREEBSD_AGP=yes" and disabling NvAgp support in xorg.conf) still
> > > > results in a reboot.
> > > >
> > > > Going the NvAGP route (Building without support for AGPGART, setting
> > > > NvAgp to 1 in the xorg.conf, and setting hint.agp.0.disabled=1 in
> > > > /boot/device.hints) also results in a reboot when X starts. One thing
> > > > I notice here; when I specify hint.agp.0.disabled=1, and check the
> > > > output of 'kldstat -v' after booting, I still see several agp drivers
> > > > loaded:
> > > >
> > > > $ kldstat -v |grep -i agp
> > > > 387 pci/agp_ali
> > > > 388 pci/agp_amd
> > > > 389 pci/agp_amd64
> > > > 390 pci/agp_ati
> > > > 391 pci/agp_i810
> > > > 392 pci/agp_intel
> > > > 393 pci/agp_nvidia
> > > > 394 pci/agp_sis
> > > > 395 pci/agp_via
> > > >
> > > > Is this a problem?
> > > >
> > > > I suspect a couple of problems with what I'm doing. Number one,
> > > > there's several knobs to turn (in the driver, in the OS, etc.) and
> > > > it's possible I'm not getting the correct combination. Other thing is,
> > > > I've been told by a technician that this is a PCI Express video card,
> > > > so would AGP even come into play?
> > >
> > > Probably not. I'm seeing the same thing on one machine, no AGP on MB, and
> > > agp kernel modules loaded, but nvidia-driver doesn't care about it.
> > > Let's kill all red herrings:
> > > - Is COMPAT5X in the kernel?
> >
> > COMPAT5X doesn't show up anywhere in /usr/src/; I do have 'options
> > COMPAT_FREEBSD5' defined, though (stock SMP kernel).
> >
> > > - Does running `nvidia-xconfig --query-gpu-info' reboot the system?
> > > - If you do not load the nvidia kernel module, but use Xorg's "nv" driver
> > > does this reboot the system?
> >
> > No, doesn't reboot the system. Output attached below.
> >
> > With the 'nv' driver, X starts fine. I don't use it because I don't
> > have success with the two output displays and xinerama window sizing.
> >
> > nvidia-xconfig --query-gpu-info:
> >
> > Number of GPUs: 1
> >
> > GPU #0:
> > Name : Quadro FX 3450/4000 SDI
> > PCI BusID : PCI:7:0:0
> >
> > Number of Display Devices: 2
> >
> > Display Device 0 (CRT-0):
> > EDID Name : DELL 2001FP
> > Minimum HorizSync : 31.000 kHz
> > Maximum HorizSync : 80.000 kHz
> > Minimum VertRefresh : 56 Hz
> > Maximum VertRefresh : 76 Hz
> > Maximum PixelClock : 162.000 MHz
> > Maximum Width : 1600 pixels
> > Maximum Height : 1200 pixels
> > Preferred Width : 1600 pixels
> > Preferred Height : 1200 pixels
> > Preferred VertRefresh : 60 Hz
> > Physical Width : 410 mm
> > Physical Height : 310 mm
> >
> > Display Device 1 (CRT-1):
> > EDID Name : DELL 2001FP
> > Minimum HorizSync : 31.000 kHz
> > Maximum HorizSync : 80.000 kHz
> > Minimum VertRefresh : 56 Hz
> > Maximum VertRefresh : 76 Hz
> > Maximum PixelClock : 162.000 MHz
> > Maximum Width : 1600 pixels
> > Maximum Height : 1200 pixels
> > Preferred Width : 1600 pixels
> > Preferred Height : 1200 pixels
> > Preferred VertRefresh : 60 Hz
> > Physical Width : 410 mm
> > Physical Height : 310 mm
>
> There's 3 things left I can think of:
> - weird module clash
> - bug in nvidia-driver (I assume you're running Xorg 7.x)
> - driver was not built against running kernel
>
> Using a working Xorg config from a machine with TV-out, I've tried
> compensating for your setup. Please try this xorg.conf:
>
> Section "ServerLayout"
> Identifier "Layout0"
> Screen 0 "Screen0" 0 0
> InputDevice "Keyboard0" "CoreKeyboard"
> InputDevice "Mouse0" "CorePointer"
> EndSection
>
> Section "Files"
> RgbPath "/usr/local/lib/X11/rgb"
> FontPath "/usr/local/lib/X11/fonts/misc/:unscaled"
> FontPath "/usr/local/lib/X11/fonts/100dpi/:unscaled"
> FontPath "/usr/local/lib/X11/fonts/75dpi/:unscaled"
> FontPath "/usr/local/lib/X11/fonts/misc/"
> FontPath "/usr/local/lib/X11/fonts/Type1/"
> FontPath "/usr/local/lib/X11/fonts/100dpi/"
> FontPath "/usr/local/lib/X11/fonts/75dpi/"
> FontPath "/usr/local/lib/X11/fonts/cyrillic/"
> FontPath "/usr/local/lib/X11/fonts/TTF/"
> EndSection
>
> Section "Module"
> Load "dbe"
> Load "extmod"
> Load "type1"
> Load "freetype"
> Load "glx"
> EndSection
>
> Section "ServerFlags"
> Option "Xinerama" "0"
> EndSection
>
> Section "InputDevice"
> Identifier "Mouse0"
> Driver "mouse"
> Option "Protocol" "auto"
> Option "Device" "/dev/sysmouse"
> Option "Emulate3Buttons" "no"
> Option "ZAxisMapping" "4 5"
> EndSection
>
> Section "InputDevice"
> Identifier "Keyboard0"
> Driver "keyboard"
> EndSection
>
> Section "Monitor"
> Identifier "Monitor0"
> VendorName "Dell"
> ModelName "2001FP"
> HorizSync 31.0 - 80.0
> VertRefresh 56.0 - 76.0
> Option "DPMS"
> EndSection
>
> Section "Monitor"
> Identifier "Monitor1"
> VendorName "Dell"
> ModelName "2001FP"
> HorizSync 31.0 - 80.0
> VertRefresh 56.0 - 76.0
> Option "DPMS"
> EndSection
>
> Section "Device"
> Identifier "Device0"
> Driver "nvidia"
> VendorName "NVIDIA Corporation"
> BoardName "Quadro FX 3450/4000 SDI"
> Option "NvAgp" "0"
> EndSection
>
> Section "Device"
> Identifier "Videocard0"
> Driver "nvidia"
> VendorName "NVIDIA Corporation"
> BoardName "Quadro FX 3450/4000 SDI"
> EndSection
>
> Section "Screen"
> Identifier "Screen0"
> Device "Videocard0"
> Monitor "Monitor0"
> DefaultDepth 24
> Option "TwinView" "1"
> SubSection "Display"
> Depth 24
> Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
> EndSubSection
> EndSection
>
>
> --
> Mel
> _______________________________________________
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
--
=======================================================
Eric I. Ekong eric@unixtechs.org
FreeBSD - The Power to Serve http://www.freebsd.org
K Desktop Environment on FreeBSD http://freebsd.kde.org
Enlightenment E16 and E17 http://www.e.org
=======================================================
Laws of Serendipity:
(1) In order to discover anything, you must be looking for
something.
(2) If you wish to make an improved product, you must already
be engaged in making an inferior one.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070911035008.GA1629>