Date: Sun, 8 Oct 2000 13:52:11 -0500 (CDT) From: Joe Greco <jgreco@ns.sol.net> To: stable@freebsd.org, grog@lemis.com Subject: vinum with many disks on 4.1.1R Message-ID: <200010081852.NAA02651@aurora.sol.net>
next in thread | raw e-mail | index | archive | help
I've got a large number of disks set up on an ASUS CUR-DLS, with three
Adaptec 2940U2W's and two 39160's, two PIII-700's, and a gig of RAM.
The disks are wired, by config, such that "da49" is device 9 on scbus 4.
I've a vinum config file that merely tries to reference all the drives.
It will panic the system. (The file listed below does not.)
Now, I did notice that at da32, the major/minor numbering seems to change
a bit:
# ls -al /dev/da3{1,2}s1e
crw-r----- 2 root operator 13, 0x000200fc Oct 8 00:38 /dev/da31s1e
crw-r----- 2 root operator 13, 0x00220004 Oct 8 00:38 /dev/da32s1e
and it just seems real funny that this is the point at which I run into
problems.
With da32 commented out:
# vinum
vinum ->
vinum -> resetconfig
WARNING! This command will completely wipe out your vinum configuration.
All data will be lost. If you really want to do this, enter the text
NO FUTURE
Enter text -> NO FUTURE
Oct 8 13:41:43 bins1-nwblwi /kernel: vinum: CONFIGURATION OBLITERATED
Vinum configuration obliterated
vinum -> create -f /etc/vinum.cfg
[....]
D 30 State: up Device /dev/da30s1e Avail: 70001/70001 MB (100%)
D 31 State: up Device /dev/da31s1e Avail: 70001/70001 MB (100%)
0 volumes:
0 plexes:
0 subdisks:
vinum ->
Now, with da32 listed:
vinum -> resetconfig
WARNING! This command will completely wipe out your vinum configuration.
All data will be lost. If you really want to do this, enter the text
NO FUTURE
Enter text -> NO FUTURE
Vinum configuration obliterated
vinum -> create -f /etc/vinum.cfg
23: drive 32 device /dev/da32s1e
** 23 : Invalid argument
20 drives:
D 10 State: up Device /dev/da10s1e Avail: 70001/70001 MB (100%)
D 11 State: up Device /dev/da11s1e Avail: 70001/70001 MB (100%)
D 12 State: up Device /dev/da12s1e Avail: 70001/70001 MB (100%)
D 13 State: up Device /dev/da13s1e Avail: 70001/70001 MB (100%)
D 14 State: up Device /dev/da14s1e Avail: 70001/70001 MB (100%)
D 15 State: up Device /dev/da15s1e Avail: 70001/70001 MB (100%)
D 16 State: up Device /dev/da16s1e Avail: 70001/70001 MB (100%)
D 18 State: up Device /dev/da18s1e Avail: 70001/70001 MB (100%)
D 19 State: up Device /dev/da19s1e Avail: 70001/70001 MB (100%)
D 20 State: up Device /dev/da20s1e Avail: 70001/70001 MB (100%)
D 21 State: up Device /dev/da21s1e Avail: 70001/70001 MB (100%)
D 22 State: up Device /dev/da22s1e Avail: 70001/70001 MB (100%)
D 23 State: up Device /dev/da23s1e Avail: 70001/70001 MB (100%)
D 24 State: up Device /dev/da24s1e Avail: 70001/70001 MB (100%)
D 25 State: up Device /dev/da25s1e Avail: 70001/70001 MB (100%)
D 26 State: up Device /dev/da26s1e Avail: 70001/70001 MB (100%)
D 28 State: up Device /dev/da28s1e Avail: 70001/70001 MB (100%)
D 29 State: up Device /dev/da29s1e Avail: 70001/70001 MB (100%)
D 30 State: up Device /dev/da30s1e Avail: 70001/70001 MB (100%)
D 31 State: up Device /dev/da31s1e Avail: 70001/70001 MB (100%)
D 32 State: referenced Device /dev/da32s1e Avail: 0/0 MB
0 volumes:
0 plexes:
0 subdisks:
vinum ->
da33 being added results in slightly different:
Vinum configuration obliterated
vinum -> create -f /etc/vinum.cfg
23: drive 32 device /dev/da32s1e
** 23 : Invalid argument
24: drive 33 device /dev/da33s1e
** 24 Can't initialize drive 33: Device not configured
20 drives:
[....]
D 31 State: up Device /dev/da31s1e Avail: 70001/70001 MB (100%)
D 32 State: referenced Device /dev/da32s1e Avail: 0/0 MB
D 33 State: down Device /dev/da33s1e Avail: 0/0 MB
0 volumes:
0 plexes:
0 subdisks:
vinum ->
But it is quite clearly full of it:
# dd if=/dev/da32s1e of=/dev/null bs=65536 count=512
512+0 records in
512+0 records out
33554432 bytes transferred in 0.960588 secs (34931139 bytes/sec)
# ^32^33
dd if=/dev/da33s1e of=/dev/null bs=65536 count=512
512+0 records in
512+0 records out
33554432 bytes transferred in 0.960558 secs (34932231 bytes/sec)
The damn drives are there and configured. As are they all.
Uncomment da34-39.
Pouf. Serial console reports:
Oct 8 13:50:39 bins1-nwblwi /kernel: vinum: CONFIGURATION OBLITERATED
Oct 8 13:50:45 bins1-nwblwi /kernel: vinum: drive 10 is up
Oct 8 13:50:45 bins1-nwblwi /kernel: vinum: drive 11 is up
rnel: vinum: dribins1-nwblwi /ke
ve 12 is up
Oct 8 13:50:45
bins1-nwblwi /keFrnel: vinum: driave 13 is up
Octt 8 13:50:45 bians1-nwblwi /kernlel: vinum: drive 14 is up
Oct t 8 13:50:45 binsr1-nwblwi /kernela: vinum: drive 1p5 is up
Oct 8 13:50:45 bins1-1nwblwi /kernel: 2vinum: drive 16 :is up
Oct 8 1 3:50:45 bins1-nwpblwi /kernel: vianum: drive 18 isg up
Oct 8 13:e50:45 bins1-nwbl wi /kernel: vinufm: drive 19 is uap
ct 8 13:50u:45 bins1-nwblwil /kernel: vinum:t drive 20 is up
Oct 8 13:50:4w5 bins1-nwblwi /hkernel: vinum: dirive 21 is up
lOct 8 13:50:45 ebins1-nwblwi /ke rnel: vinum: driive 22 is up
Ocnt 8 13:50:45 bi ns1-nwblwi /kernkel: vinum: drivee 23 is up
rnel mode
fault virtual address = 0x28
fault code = supervisor read, page not present
instruction pointer = 0x8:0xc6b63954
stack pointer = 0x10:0xe6028d14
frame pointer = 0x10:0xe6028d28
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 6499 (vinum)
interrupt mask = none
trap number = 12
panic: page fault
syncing disks... 20 19 11 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
giving up on 1 buffers
Uptime: 1h41m57s
Automatic reboot in 15 seconds - press a key on the console to abort
Rebooting...
----
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.1.1-RELEASE #1: Sun Oct 8 01:22:05 CDT 2000
root@XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (701.60-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM>
real memory = 1073721344 (1048556K bytes)
avail memory = 1042305024 (1017876K bytes)
Preloaded elf kernel "kernel" at 0xc02e6000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <RCC LE host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <unknown card> (vendor=0x8086, dev=0x1229) at 2.0 irq 14
pcib1: <DEC 21152 PCI-PCI bridge> at device 3.0 on pci0
pci1: <PCI bus> on pcib1
de0: <Digital 21140A Fast Ethernet> port 0xc800-0xc87f mem 0xfd000000-0xfd00007f irq 11 at device 4.0 on pci1
de0: SMC 9332BDT 21140A [10-100Mb/s] pass 2.2
de0: address 00:e0:29:3c:77:00
de1: <Digital 21140A Fast Ethernet> port 0xc400-0xc47f mem 0xfc800000-0xfc80007f irq 9 at device 5.0 on pci1
de1: SMC 9332BDT 21140A [10-100Mb/s] pass 2.2
de1: address 00:e0:29:3c:77:01
ahc0: <Adaptec 2940 Ultra2 SCSI adapter> port 0xb800-0xb8ff mem 0xfc000000-0xfc000fff irq 10 at device 4.0 on pci0
aic7890/91: Wide Channel A, SCSI Id=7, 32/255 SCBs
ahc1: <Adaptec 2940 Ultra2 SCSI adapter> port 0xb400-0xb4ff mem 0xfb800000-0xfb800fff irq 12 at device 5.0 on pci0
aic7890/91: Wide Channel A, SCSI Id=7, 32/255 SCBs
ahc2: <Adaptec 2940 Ultra2 SCSI adapter> port 0xb000-0xb0ff mem 0xfb000000-0xfb000fff irq 15 at device 6.0 on pci0
aic7890/91: Wide Channel A, SCSI Id=7, 32/255 SCBs
pci0: <ATI Mach64-GR graphics accelerator> at 7.0
isab0: <PCI to ISA bridge (vendor=1166 device=0200)> at device 15.0 on pci0
isa0: <ISA bus> on isab0
pci0: <Unknown PCI ATA controller> at 15.1
pci0: <OHCI USB controller> at 15.2 irq 9
pcib2: <RCC LE host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib2
ahc3: <Adaptec 3960D Ultra160 SCSI adapter> port 0xa000-0xa0ff mem 0xf8800000-0xf8800fff irq 7 at device 2.0 on pci2
aic7899: Wide Channel A, SCSI Id=7, 32/255 SCBs
ahc4: <Adaptec 3960D Ultra160 SCSI adapter> port 0x9800-0x98ff mem 0xf8000000-0xf8000fff irq 9 at device 2.1 on pci2
aic7899: Wide Channel B, SCSI Id=7, 32/255 SCBs
ahc5: <Adaptec 3960D Ultra160 SCSI adapter> port 0x9400-0x94ff mem 0xf7800000-0xf7800fff irq 5 at device 3.0 on pci2
aic7899: Wide Channel A, SCSI Id=7, 32/255 SCBs
ahc6: <Adaptec 3960D Ultra160 SCSI adapter> port 0x9000-0x90ff mem 0xf7000000-0xf7000fff irq 9 at device 3.1 on pci2
aic7899: Wide Channel B, SCSI Id=7, 32/255 SCBs
sym0: <896> port 0x8800-0x88ff mem 0xf6000000-0xf6001fff,0xf6800000-0xf68003ff irq 9 at device 5.0 on pci2
sym0: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: handling phase mismatch from SCRIPTS.
sym1: <896> port 0x8400-0x84ff mem 0xf5000000-0xf5001fff,0xf5800000-0xf58003ff irq 9 at device 5.1 on pci2
sym1: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking
sym1: open drain IRQ line driver, using on-chip SRAM
sym1: using LOAD/STORE-based firmware.
sym1: handling phase mismatch from SCRIPTS.
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: parallel port not found.
IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to deny, logging limited to 100 packets/entry by default
Waiting 2 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
(noperiph:sym1:0:-1:-1): SCSI BUS reset delivered.
de0: enabling 100baseTX port
da70 at ahc5 bus 0 target 0 lun 0
da70: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da70: 160.000MB/s transfers (80.000MHz, offset 63, 16bit)
da70: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da71 at ahc5 bus 0 target 1 lun 0
da71: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da71: 160.000MB/s transfers (80.000MHz, offset 63, 16bit)
da71: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da72 at ahc5 bus 0 target 2 lun 0
da72: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da72: 160.000MB/s transfers (80.000MHz, offset 63, 16bit)
da72: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da73 at ahc5 bus 0 target 3 lun 0
da73: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da73: 160.000MB/s transfers (80.000MHz, offset 63, 16bit)
da73: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da74 at ahc5 bus 0 target 4 lun 0
da74: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da74: 160.000MB/s transfers (80.000MHz, offset 63, 16bit)
da74: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da75 at ahc5 bus 0 target 5 lun 0
da75: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da75: 160.000MB/s transfers (80.000MHz, offset 63, 16bit)
da75: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da76 at ahc5 bus 0 target 6 lun 0
da76: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da76: 160.000MB/s transfers (80.000MHz, offset 63, 16bit)
da76: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da50 at ahc3 bus 0 target 0 lun 0
da50: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da50: 160.000MB/s transfers (80.000MHz, offset 63, 16bit)
da50: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da51 at ahc3 bus 0 target 1 lun 0
da51: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da51: 160.000MB/s transfers (80.000MHz, offset 63, 16bit)
da51: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da52 at ahc3 bus 0 target 2 lun 0
da52: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da52: 160.000MB/s transfers (80.000MHz, offset 63, 16bit)
da52: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da53 at ahc3 bus 0 target 3 lun 0
da53: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da53: 160.000MB/s transfers (80.000MHz, offset 63, 16bit)
da53: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da54 at ahc3 bus 0 target 4 lun 0
da54: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da54: 160.000MB/s transfers (80.000MHz, offset 63, 16bit)
da54: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da55 at ahc3 bus 0 target 5 lun 0
da55: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da55: 160.000MB/s transfers (80.000MHz, offset 63, 16bit)
da55: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da56 at ahc3 bus 0 target 6 lun 0
da56: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da56: 160.000MB/s transfers (80.000MHz, offset 63, 16bit)
da56: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da58 at ahc3 bus 0 target 8 lun 0
da58: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da58: 160.000MB/s transfers (80.000MHz, offset 63, 16bit)
da58: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da59 at ahc3 bus 0 target 9 lun 0
da59: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da59: 160.000MB/s transfers (80.000MHz, offset 63, 16bit)
da59: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da20 at ahc0 bus 0 target 0 lun 0
da20: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da20: 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
da20: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da21 at ahc0 bus 0 target 1 lun 0
da21: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da21: 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
da21: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da22 at ahc0 bus 0 target 2 lun 0
da22: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da22: 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
da22: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da24 at ahc0 bus 0 target 4 lun 0
da24: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da24: 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
da24: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da23 at ahc0 bus 0 target 3 lun 0
da23: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da23: 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
da23: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da25 at ahc0 bus 0 target 5 lun 0
da25: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da25: 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
da25: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da26 at ahc0 bus 0 target 6 lun 0
da26: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da26: 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
da26: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da28 at ahc0 bus 0 target 8 lun 0
da28: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da28: 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
da28: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da29 at ahc0 bus 0 target 9 lun 0
da29: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da29: 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
da29: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da30 at ahc1 bus 0 target 0 lun 0
da30: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da30: 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
da30: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da31 at ahc1 bus 0 target 1 lun 0
da31: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da31: 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
da31: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da32 at ahc1 bus 0 target 2 lun 0
da32: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da32: 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
da32: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da33 at ahc1 bus 0 target 3 lun 0
da33: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da33: 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
da33: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da34 at ahc1 bus 0 target 4 lun 0
da34: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da34: 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
da34: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da35 at ahc1 bus 0 target 5 lun 0
da35: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da35: 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
da35: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da36 at ahc1 bus 0 target 6 lun 0
da36: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da36: 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
da36: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da38 at ahc1 bus 0 target 8 lun 0
da38: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da38: 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
da38: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da39 at ahc1 bus 0 target 9 lun 0
da39: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da39: 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
da39: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da40 at ahc2 bus 0 target 0 lun 0
da40: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da40: 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
da40: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da41 at ahc2 bus 0 target 1 lun 0
da41: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da41: 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
da41: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da42 at ahc2 bus 0 target 2 lun 0
da42: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da42: 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
da42: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da43 at ahc2 bus 0 target 3 lun 0
da43: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da43: 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
da43: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da44 at ahc2 bus 0 target 4 lun 0
da44: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da44: 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
da44: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da45 at ahc2 bus 0 target 5 lun 0
da45: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da45: 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
da45: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da46 at ahc2 bus 0 target 6 lun 0
da46: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da46: 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
da46: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da48 at ahc2 bus 0 target 8 lun 0
da48: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da48: 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
da48: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da49 at ahc2 bus 0 target 9 lun 0
da49: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da49: 80.000MB/s transfers (40.000MHz, offset 63, 16bit)
da49: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da78 at ahc5 bus 0 target 8 lun 0
da78: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da78: 160.000MB/s transfers (80.000MHz, offset 63, 16bit)
da78: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da79 at ahc5 bus 0 target 9 lun 0
da79: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da79: 160.000MB/s transfers (80.000MHz, offset 63, 16bit)
da79: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da10 at sym1 bus 0 target 0 lun 0
da10: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da10: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da10: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da12 at sym1 bus 0 target 2 lun 0
da12: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da12: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da12: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da11 at sym1 bus 0 target 1 lun 0
da11: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da11: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da11: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da15 at sym1 bus 0 target 5 lun 0
da15: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da15: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da15: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da14 at sym1 bus 0 target 4 lun 0
da14: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da14: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da14: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da13 at sym1 bus 0 target 3 lun 0
da13: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da13: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da13: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da16 at sym1 bus 0 target 6 lun 0
da16: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da16: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da16: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da19 at sym1 bus 0 target 9 lun 0
da19: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da19: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da19: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da18 at sym1 bus 0 target 8 lun 0
da18: <SEAGATE ST173404LWV 4301> Fixed Direct Access SCSI-3 device
da18: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da18: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da0 at sym0 bus 0 target 0 lun 0
da0: <IBM DNES-309170W SA30> Fixed Direct Access SCSI-3 device
da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da0: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C)
Mounting root from ufs:/dev/da0s1a
WARNING: / was not properly dismounted
de1: autosense failed: cable problem?
de0: enabling 100baseTX port
de0: enabling Full Duplex 100baseTX port
de1: enabling 100baseTX port
de1: enabling Full Duplex 100baseTX port
ohci0: <OHCI (generic) USB controller> mem 0xf9000000-0xf9000fff irq 9 at device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
----
#
# FEEDER_SMP -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
# http://www.FreeBSD.org/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
# $FreeBSD: src/sys/i386/conf/FEEDER_SMP,v 1.246.2.11 2000/09/22 10:01:48 nyan Exp $
machine i386
#cpu I386_CPU
#cpu I486_CPU
cpu I586_CPU
cpu I686_CPU
ident FEEDER_SMP
maxusers 128
#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
#options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options SOFTUPDATES #Enable FFS soft updates support
#options MFS #Memory Filesystem
#options MD_ROOT #MD is a potential root device
#options NFS #Network Filesystem
#options NFS_ROOT #NFS usable as root device, NFS required
#options MSDOSFS #MSDOS Filesystem
#options CD9660 #ISO 9660 Filesystem
#options CD9660_ROOT #CD-ROM usable as root, CD9660 required
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
#options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
#options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options NO_F00F_HACK
options IPFIREWALL #firewall
options IPFIREWALL_VERBOSE #print information about
options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity
options MSGBUF_SIZE=131072
options SC_HISTORY_SIZE=1000 # number of history buffer lines
#options TCP_DROP_SYNFIN #drop TCP packets with SYN+FIN
#options TCP_RESTRICT_RST #restrict emission of TCP RST
options NMBCLUSTERS=25088
# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor Kernel
#options APIC_IO # Symmetric (APIC) I/O
# Optionally these may need tweaked, (defaults shown):
#options NCPU=2 # number of CPUs
#options NBUS=4 # number of busses
#options NAPIC=1 # number of IO APICs
#options NINTR=24 # number of INTs
device isa
#device eisa
device pci
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
#device fd1 at fdc0 drive 1
# ATA and ATAPI devices
#device ata0 at isa? port IO_WD1 irq 14
#device ata1 at isa? port IO_WD2 irq 15
#device ata
#device atadisk # ATA disk drives
#device atapicd # ATAPI CDROM drives
#device atapifd # ATAPI floppy drives
#device atapist # ATAPI tape drives
#options ATA_STATIC_ID #Static device numbering
#options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices
# SCSI Controllers
#device ahb # EISA AHA1742 family
#device ahc # AHA2940 and onboard AIC7xxx devices
#device amd # AMD 53C974 (Teckram DC-390(T))
#device isp # Qlogic family
#device ncr # NCR/Symbios Logic
#device sym # NCR/Symbios Logic (newer chipsets)
options SYM_SETUP_LP_PROBE_MAP=0x40
# Allow ncr to attach legacy NCR devices when
# both sym and ncr are configured
#device adv0 at isa?
#device adw
#device bt0 at isa?
#device aha0 at isa?
#device aic0 at isa?
# SCSI peripherals
#device scbus # SCSI bus (required)
#device da # Direct Access (disks)
#device sa # Sequential Access (tape etc)
#device cd # CD
device pass # Passthrough device (direct SCSI access)
device sym0 # NCR/Symbios Logic (newer chipsets)
device sym1 # NCR/Symbios Logic (newer chipsets)
device ahc0 # AHA2940 and onboard AIC7xxx devices
device ahc1 # AHA2940 and onboard AIC7xxx devices
device ahc2 # AHA2940 and onboard AIC7xxx devices
device ahc3 # AHA2940 and onboard AIC7xxx devices
device ahc4 # AHA2940 and onboard AIC7xxx devices
device ahc5 # AHA2940 and onboard AIC7xxx devices
device ahc6 # AHA2940 and onboard AIC7xxx devices
device ahc7 # AHA2940 and onboard AIC7xxx devices
device ahc8 # AHA2940 and onboard AIC7xxx devices
device ahc9 # AHA2940 and onboard AIC7xxx devices
device scbus0 at sym0
device scbus1 at sym1
device scbus2 at ahc0
device scbus3 at ahc1
device scbus4 at ahc2
device scbus5 at ahc3
device scbus6 at ahc4
device scbus7 at ahc5
device scbus8 at ahc6
device scbus9 at ahc7
device scbus10 at ahc8
device scbus11 at ahc9
device da0 at scbus0 target 0
device da1 at scbus0 target 1
device da2 at scbus0 target 2
device da3 at scbus0 target 3
device da4 at scbus0 target 4
device da5 at scbus0 target 5
device da6 at scbus0 target 6
device da8 at scbus0 target 8
device da9 at scbus0 target 9
device da10 at scbus1 target 0
device da11 at scbus1 target 1
device da12 at scbus1 target 2
device da13 at scbus1 target 3
device da14 at scbus1 target 4
device da15 at scbus1 target 5
device da16 at scbus1 target 6
device da18 at scbus1 target 8
device da19 at scbus1 target 9
device da20 at scbus2 target 0
device da21 at scbus2 target 1
device da22 at scbus2 target 2
device da23 at scbus2 target 3
device da24 at scbus2 target 4
device da25 at scbus2 target 5
device da26 at scbus2 target 6
device da28 at scbus2 target 8
device da29 at scbus2 target 9
device da30 at scbus3 target 0
device da31 at scbus3 target 1
device da32 at scbus3 target 2
device da33 at scbus3 target 3
device da34 at scbus3 target 4
device da35 at scbus3 target 5
device da36 at scbus3 target 6
device da38 at scbus3 target 8
device da39 at scbus3 target 9
device da40 at scbus4 target 0
device da41 at scbus4 target 1
device da42 at scbus4 target 2
device da43 at scbus4 target 3
device da44 at scbus4 target 4
device da45 at scbus4 target 5
device da46 at scbus4 target 6
device da48 at scbus4 target 8
device da49 at scbus4 target 9
device da50 at scbus5 target 0
device da51 at scbus5 target 1
device da52 at scbus5 target 2
device da53 at scbus5 target 3
device da54 at scbus5 target 4
device da55 at scbus5 target 5
device da56 at scbus5 target 6
device da58 at scbus5 target 8
device da59 at scbus5 target 9
device da60 at scbus6 target 0
device da61 at scbus6 target 1
device da62 at scbus6 target 2
device da63 at scbus6 target 3
device da64 at scbus6 target 4
device da65 at scbus6 target 5
device da66 at scbus6 target 6
device da68 at scbus6 target 8
device da69 at scbus6 target 9
device da70 at scbus7 target 0
device da71 at scbus7 target 1
device da72 at scbus7 target 2
device da73 at scbus7 target 3
device da74 at scbus7 target 4
device da75 at scbus7 target 5
device da76 at scbus7 target 6
device da78 at scbus7 target 8
device da79 at scbus7 target 9
device da80 at scbus8 target 0
device da81 at scbus8 target 1
device da82 at scbus8 target 2
device da83 at scbus8 target 3
device da84 at scbus8 target 4
device da85 at scbus8 target 5
device da86 at scbus8 target 6
device da88 at scbus8 target 8
device da89 at scbus8 target 9
device da90 at scbus9 target 0
device da91 at scbus9 target 1
device da92 at scbus9 target 2
device da93 at scbus9 target 3
device da94 at scbus9 target 4
device da95 at scbus9 target 5
device da96 at scbus9 target 6
device da98 at scbus9 target 8
device da99 at scbus9 target 9
device da100 at scbus10 target 0
device da101 at scbus10 target 1
device da102 at scbus10 target 2
device da103 at scbus10 target 3
device da104 at scbus10 target 4
device da105 at scbus10 target 5
device da106 at scbus10 target 6
device da108 at scbus10 target 8
device da109 at scbus10 target 9
device da110 at scbus11 target 0
device da111 at scbus11 target 1
device da112 at scbus11 target 2
device da113 at scbus11 target 3
device da114 at scbus11 target 4
device da115 at scbus11 target 5
device da116 at scbus11 target 6
device da118 at scbus11 target 8
device da119 at scbus11 target 9
# RAID controllers interfaced to the SCSI subsystem
#device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
#device dpt # DPT Smartcache - See LINT for options!
# RAID controllers
#device ida # Compaq Smart RAID
#device amr # AMI MegaRAID
#device mlx # Mylex DAC960 family
#device twe # 3ware Escalade
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
device psm0 at atkbdc? irq 12
device vga0 at isa?
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? flags 0x100
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa?
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# Power management support (see LINT for more options)
device apm0 at nexus? disable flags 0x20 # Advanced Power Management
# PCCARD (PCMCIA) support
#device card
#device pcic0 at isa? irq 10 port 0x3e0 iomem 0xd0000
#device pcic1 at isa? irq 11 port 0x3e2 iomem 0xd4000 disable
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
#device sio2 at isa? disable port IO_COM3 irq 5
#device sio3 at isa? disable port IO_COM4 irq 9
# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
#device plip # TCP/IP over parallel
#device ppi # Parallel port interface device
#device vpo # Requires scbus and da
options ATM_CORE #core ATM protocol family
options ATM_IP #IP over ATM support
options ATM_SIGPVC #SIGPVC signalling manager
#options ATM_SPANS #SPANS signalling manager
#options ATM_UNI #UNI signalling manager
device hea #Efficient ENI-155p ATM PCI
device hfa #FORE PCA-200E ATM PCI
# PCI Ethernet NICs.
device de # DEC/Intel DC21x4x (``Tulip'')
#device fxp # Intel EtherExpress PRO/100B (82557, 82558)
#device tx # SMC 9432TX (83c170 ``EPIC'')
#device vx # 3Com 3c590, 3c595 (``Vortex'')
#device wx # Intel Gigabit Ethernet Card (``Wiseman'')
# PCI Ethernet NICs that use the common MII bus controller code.
device miibus # MII bus support
device dc # DEC/Intel 21143 and various workalikes
#device rl # RealTek 8129/8139
#device sf # Adaptec AIC-6915 (``Starfire'')
#device sis # Silicon Integrated Systems SiS 900/SiS 7016
#device ste # Sundance ST201 (D-Link DFE-550TX)
#device tl # Texas Instruments ThunderLAN
#device vr # VIA Rhine, Rhine II
#device wb # Winbond W89C840F
#device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# ISA Ethernet NICs.
#device ed0 at isa? port 0x280 irq 10 iomem 0xd8000
#device ex
#device ep
#device fe0 at isa? port 0x300
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attatement needed
# and resources will always be dynamically assigned by the pccard code.
#device wi
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
# mode (the factory default). If you set the switches on your ISA
# card for a manually chosen I/O address and IRQ, you must specify
# those paremeters here.
#device an
# Xircom Ethernet
#device xe
# The probe order of these is presently determined by i386/isa/isa_compat.c.
#device ie0 at isa? port 0x300 irq 10 iomem 0xd0000
#device le0 at isa? port 0x300 irq 5 iomem 0xd0000
#device lnc0 at isa? port 0x280 irq 10 drq 0
#device cs0 at isa? port 0x300
#device sn0 at isa? port 0x300 irq 10
# Pseudo devices - the number indicates how many units to allocated.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
#pseudo-device sl 1 # Kernel SLIP
#pseudo-device ppp 1 # Kernel PPP
#pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device md # Memory "disks"
#pseudo-device gif 4 # IPv6 and IPv4 tunneling
#pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device bpf #Berkeley packet filter
# USB support
#device uhci # UHCI PCI->USB interface
#device ohci # OHCI PCI->USB interface
#device usb # USB Bus (required)
#device ugen # Generic
#device uhid # "Human Interface Devices"
#device ukbd # Keyboard
#device ulpt # Printer
#device umass # Disks/Mass storage - Requires scbus and da
#device ums # Mouse
# USB Ethernet, requires mii
#device aue # ADMtek USB ethernet
#device cue # CATC USB ethernet
#device kue # Kawasaki LSI USB ethernet
----
#drive 1 device /dev/da1s1e
#drive 2 device /dev/da2s1e
drive 10 device /dev/da10s1e
drive 11 device /dev/da11s1e
drive 12 device /dev/da12s1e
drive 13 device /dev/da13s1e
drive 14 device /dev/da14s1e
drive 15 device /dev/da15s1e
drive 16 device /dev/da16s1e
drive 18 device /dev/da18s1e
drive 19 device /dev/da19s1e
drive 20 device /dev/da20s1e
drive 21 device /dev/da21s1e
drive 22 device /dev/da22s1e
drive 23 device /dev/da23s1e
drive 24 device /dev/da24s1e
drive 25 device /dev/da25s1e
drive 26 device /dev/da26s1e
drive 28 device /dev/da28s1e
drive 29 device /dev/da29s1e
drive 30 device /dev/da30s1e
drive 31 device /dev/da31s1e
#--#drive 32 device /dev/da32s1e
#--#drive 33 device /dev/da33s1e
#--#drive 34 device /dev/da34s1e
#--#drive 35 device /dev/da35s1e
#--#drive 36 device /dev/da36s1e
#--#drive 38 device /dev/da38s1e
#--#drive 39 device /dev/da39s1e
#--#drive 40 device /dev/da40s1e
#--#drive 41 device /dev/da41s1e
#--#drive 42 device /dev/da42s1e
#--#drive 43 device /dev/da43s1e
#--#drive 44 device /dev/da44s1e
#--#drive 45 device /dev/da45s1e
#--#drive 46 device /dev/da46s1e
#--#drive 48 device /dev/da48s1e
#--#drive 49 device /dev/da49s1e
#--#drive 50 device /dev/da50s1e
#--#drive 51 device /dev/da51s1e
#--#drive 52 device /dev/da52s1e
#--#drive 53 device /dev/da53s1e
#--#drive 54 device /dev/da54s1e
#--#drive 55 device /dev/da55s1e
#--#drive 56 device /dev/da56s1e
#--#drive 58 device /dev/da58s1e
#--#drive 59 device /dev/da59s1e
#--##drive 60 device /dev/da60s1e
#--##drive 61 device /dev/da61s1e
#--##drive 62 device /dev/da62s1e
#--##drive 63 device /dev/da63s1e
#--##drive 64 device /dev/da64s1e
#--##drive 65 device /dev/da65s1e
#--##drive 66 device /dev/da66s1e
#--##drive 68 device /dev/da68s1e
#--##drive 69 device /dev/da69s1e
#--#drive 70 device /dev/da70s1e
#--#drive 71 device /dev/da71s1e
#--#drive 72 device /dev/da72s1e
#--#drive 73 device /dev/da73s1e
#--#drive 74 device /dev/da74s1e
#--#drive 75 device /dev/da75s1e
#--#drive 76 device /dev/da76s1e
#--#drive 78 device /dev/da78s1e
#--#drive 79 device /dev/da79s1e
--
... Joe
-------------------------------------------------------------------------------
Joe Greco - Systems Administrator jgreco@ns.sol.net
Solaria Public Access UNIX - Milwaukee, WI 414/342-4847
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200010081852.NAA02651>