Date: Tue, 18 Jul 2000 19:35:36 +0200 From: Wilko Bulte <wkb@freebie.demon.nl> To: FreeBSD-alpha mailing list <freebsd-alpha@freebsd.org> Cc: Andrew Gallatin <gallatin@cs.duke.edu> Subject: testresults for 4.1RC on Sable (AS2100) Message-ID: <20000718193536.A1996@freebie.demon.nl>
next in thread | raw e-mail | index | archive | help
FYI: Sable seems to install OK on my homegrown-41RC (except for a bad
block on the CDRW in the bindist. Grrrr.)
In case somebody wants me to test anything particular please let me know
W/
Script started on Tue Jul 18 15:15:02 2000
wilklt#tip a
VMS PALcode V5.56-7 , OSF PALcode V1.45-12
P00>>>sho conf
Digital Equipment Corporation
AlphaServer 2100 4/200
SRM Console V5.3-2 VMS PALcode V5.56-7, OSF PALcode V1.45-12
Component Status Module ID
CPU 0 P B2020-AA DECchip (tm) 21064-3
Memory 0 P B2021-CA 128 MB
I/O B2110-AA
dva0.0.0.0.1 RX26/RX23
Slot Option Hose 0, Bus 0, PCI
0 DECchip 21040-AA ewa0.0.0.0.0 08-00-2B-E2-84-04
1 NCR 53C810 pka0.7.0.1.0 SCSI Bus ID 7
dka0.0.0.1.0 RZ29B
dka600.6.0.1.0 RRD43
2 Intel 82375 Bridge to Hose 1, EISA
Slot Option Hose 1, EISA
2 Compaq Qvision
P00>>>
P00>>>boot \
_>
P00>>>
P00>>>
P00>>>sho dev
dka0.0.0.1.0 DKA0 RZ29B 0014
dka600.6.0.1.0 DKA600 RRD43 1084
dva0.0.0.0.1 DVA0 RX26/RX23
ewa0.0.0.0.0 EWA0 08-00-2B-E2-84-04
pka0.7.0.1.0 PKA0 SCSI Bus ID 7
P00>>>boot dva0
(boot dva0.0.0.0.1 -flags a)
block 0 of dva0.0.0.0.1 is a valid boot block
reading 15 blocks from dva0.0.0.0.1
bootstrap code read in
base = 200000, image_start = 0, image_bytes = 1e00
initializing HWRPB at 2000
initializing page table at 7ff0000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
VMS PAL rev: 0x4000700010538
OSF PAL rev: 0x4000c0002012d
Switch to OSF PAL code succeeded.
FreeBSD/alpha SRM disk boot, Revision 0.3
(root@miata.wbnet, Sun Jul 16 17:19:42 GMT 2000)
Memory: 131072 k
Please insert MFS root floppy and press enter:
Entering kernel at 0xfffffc00003297e0...
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 41rc-16jul #0: Sun Jul 16 19:24:36 GMT 2000
root@miata.wbnet:/usr/src/sys/compile/BOOTMFS
DEC AlphaServer 2100
AlphaServer 2100 4/200, 190MHz
8192 byte page size, 1 processor.
CPU: EV4 (21064) major=2 minor=1
OSF PAL rev: 0x4000c0002012d
real memory = 132046848 (128952K bytes)
avail memory = 120553472 (117728K bytes)
Preloaded elf kernel "kernel" at 0xfffffc00008fe000.
Preloaded mfs_root "/mfsroot" at 0xfffffc00008fe0a0.
md0: Preloaded image </mfsroot> 2949120 bytes at 0xfffffc000062b410
md1: Malloc disk
pci0: <PCI bus> on pcib0
de0: <Digital 21040 Ethernet> port 0x10100-0x1017f mem 0x81000100-0x8100017f irq 34 at device 0.0 on pci0
de0: interrupting at T2 irq 34
de0: DEC 21040 [10Mb/s] pass 2.3
de0: address 08:00:2b:e2:84:04
sym0: <810> port 0x10000-0x100ff mem 0x81000000-0x810000ff irq 33 at device 1.0 on pci0
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: interrupting at T2 irq 33
isab0: <Intel 82375EB PCI-EISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
pci0: <unknown card> (vendor=0x0001, dev=0x0000) at 12.0 irq 32
pci0: <unknown card> (vendor=0x0000, dev=0x0000) at 12.4
pci0: <unknown card> (vendor=0x0001, dev=0x0000) at 13.0 irq 32
pci0: <unknown card> (vendor=0x0000, dev=0x0000) at 13.4
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: interrupting at T2 irq 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd0: interrupting at T2 irq 1
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x0>
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A, console
sio0: interrupting at T2 irq 4
sio1: reserved for low-level i/o
Timecounter "alpha" frequency 190019628 Hz
Waiting 15 seconds for SCSI devices to settle
de0: autosense failed: cable problem?
Mounting root from ufs:/dev/md0c
cd0 at sym0 bus 0 target 2 lun 0
cd0: <DEC RRD46 (C) DEC 0557> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: cd present [295960 x 512 byte records]
da0 at sym0 bus 0 target 0 lun 0
da0: <DEC RZ29B (C) DEC 0014> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled
da0: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
cd1 at sym0 bus 0 target 6 lun 0
cd1: <DEC RRD43 (C) DEC 1084> Removable CD-ROM SCSI-2 device
cd1: 4.166MB/s transfers (4.166MHz, offset 8)
cd1: Attempt to query device size failed: NOT READY,
/stand/sysinstall running as init on serial console
These are the predefined terminal types available to
sysinstall when running stand-alone. Please choose the
closest match for your particular terminal.
1 ...................... Standard ANSI terminal.
2 ...................... VT100 or compatible terminal.
3 ...................... FreeBSD system console (color).
4 ...................... FreeBSD system console (monochrome).
Script done on Tue Jul 18 15:56:59 2000
--
Wilko Bulte http://www.freebsd.org
wilko@freebsd.org http://www.nlfug.nl
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000718193536.A1996>