Date: Mon, 01 May 2000 22:52:34 -0600 From: Chris Fedde <chris@fedde.littleton.co.us> To: questions@freebsd.org Subject: byterunner TC-800 support in 4.0R? Message-ID: <200005020452.e424qZZ00418@fedde.littleton.co.us>
next in thread | raw e-mail | index | archive | help
I have a byterunner TC-800 serial port card in my system that was working
well under 3.X but after a recent re-install to 4.0R the board fails to
work at data rates over 9600bps. Is this a known problem?
My current config for the board is as follows
#
# Multiport Serial Card
# TC-800
#
# Other flags for sio that aren't documented in the man page.
# 0x20000 enable hardware RTS/CTS and larger FIFOs. Only works for
# ST16650A-compatible UARTs.
#
options COM_MULTIPORT #code for some cards with shared IRQs
device sio2 at isa? port 0x100 flags 0x20205
device sio3 at isa? port 0x108 flags 0x20205
device sio4 at isa? port 0x110 flags 0x20205
device sio5 at isa? port 0x118 flags 0x20205
device sio6 at isa? port 0x120 flags 0x20205
device sio7 at isa? port 0x128 flags 0x20205
device sio8 at isa? port 0x130 flags 0x20205
device sio9 at isa? port 0x138 flags 0x20205 irq 0x2
BTW sio0 and sio1 (on the motherboard) work fine up to 115200.
thanks
chris
--
Chris Fedde
303 773 9134
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200005020452.e424qZZ00418>