Date: Tue, 9 Jul 2002 14:59:06 -0700 (PDT) From: Sam Habash <the@llama.com> To: freebsd-gnats-submit@FreeBSD.org Subject: conf/40391: sysinstall with PCCARD<->ISA bridge gets confused (floppy install) Message-ID: <200207092159.g69Lx6qs069795@www.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 40391 >Category: conf >Synopsis: sysinstall with PCCARD<->ISA bridge gets confused (floppy install) >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Tue Jul 09 15:00:07 PDT 2002 >Closed-Date: >Last-Modified: >Originator: Sam Habash >Release: 4.6-RELEASE >Organization: >Environment: FreeBSD best.bestii.com 4.6-RELEASE FreeBSD 4.6-RELEASE #0: Tue Jun 11 06:14:12 GMT 2002 murray@builder.freebsdmall.com:/usr/src/sys/compile/GENERIC i386 >Description: Upon going through sysinstall using floppies, it detects the presence of a PCCARD adapter and ask you if you want to use it as the network device. Because this is a gateway box, it already has an ethernet adapter for connectivity, and thus, I select "NO". Everything appears fine until sysinstall starts extracting packages. Apparently, the chroot to change its install root from mfsroot to the newly fs'ed /tmp never happens, so it dumps packages to mfsroot, quickly filling it up. /var/run/dmesg.boot Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.6-RELEASE #0: Tue Jun 11 06:14:12 GMT 2002 murray@builder.freebsdmall.com:/usr/src/sys/compile/GENERIC Timecounter "i8254" frequency 1193182 Hz CPU: AMD-K6tm w/ multimedia extensions (187.50-MHz 586-class CPU) Origin = "AuthenticAMD" Id = 0x562 Stepping = 2 Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX> AMD Features=0x400<<b10>> real memory = 201326592 (196608K bytes) config> di sn0 config> di lnc0 config> di ie0 config> di fe0 config> di ed0 config> di cs0 config> q avail memory = 190844928 (186372K bytes) Preloaded elf kernel "kernel" at 0xc04d0000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc04d009c. md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x6400-0x641f irq 11 at de vice 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0 dc0: <82c169 PNIC 10/100BaseTX> port 0x6500-0x65ff mem 0xe2000000-0xe20000ff irq 9 at device 10.0 on pci0 dc0: Ethernet address: 00:a0:cc:3d:87:da miibus0: <MII bus> on dc0 lxtphy0: <LXT970 10/100 media interface> on miibus0 lxtphy0: 100baseFX, 100baseFX-FDX, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-F DX, auto xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0x6600-0x667f mem 0xe2001000-0xe200 107f irq 12 at device 11.0 on pci0 xl0: Ethernet address: 00:50:da:0d:90:50 miibus1: <MII bus> on xl0 xlphy0: <3Com internal media interface> on miibus1 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci0: <Matrox MGA Millennium 2064W graphics accelerator> at 12.0 irq 11 orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> pcic0: <Vadem 469> at port 0x3e0 iomem 0xd0000 on isa0 pcic0: Polling mode pccard0: <PC Card bus (classic)> on pcic0 pccard1: <PC Card bus (classic)> on pcic0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: parallel port not found. ad0: 3815MB <WDC AC34000L> [7752/16/63] at ata0-master UDMA33 ad1: 6149MB <WDC AC36400L> [13328/15/63] at ata0-slave UDMA33 Mounting root from ufs:/dev/ad0s1a pccard: card inserted, slot 0 >How-To-Repeat: Find a PCCARD<->ISA bridge (like if you want to do IBSS with a Orinoco card). I'm not sure if the problem also occurs with laptops with both wireless and ethernet cards, or is strictly limited to what I ran into. >Fix: Workaround is to remove the PCCARD<->ISA bridge before running sysinstall. Removing the pccard is insufficient. >Release-Note: >Audit-Trail: >Unformatted: To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200207092159.g69Lx6qs069795>