Date: Sat, 11 Aug 2001 01:39:59 -0500 From: Sean Kelly <smkelly@zombie.org> To: Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp> Cc: Kris Kennaway <kris@obsecurity.org>, current@freebsd.org Subject: Re: Random Lockups Message-ID: <20010811013959.A588@edgemaster.zombie.org> In-Reply-To: <200108110627.PAA21155@zodiac.mech.utsunomiya-u.ac.jp> References: <20010807234645.A573@edgemaster.zombie.org> <20010809032027.A99813@xor.obsecurity.org> <20010810174521.A681@edgemaster.zombie.org> <200108110241.LAA20110@zodiac.mech.utsunomiya-u.ac.jp> <20010810221944.A90165@edgemaster.zombie.org> <200108110627.PAA21155@zodiac.mech.utsunomiya-u.ac.jp>
index | next in thread | previous in thread | raw e-mail
[-- Attachment #1 --]
On Sat, Aug 11, 2001 at 03:27:09PM +0900, Kazutaka YOKOTA wrote:
> Hmm,
>
> When this lockup happens if you try to switch between two vtys, does
> the screen show the first vty (from which you are switching away) or
> the second (to which you are switching to)?
It makes it to the new vty, but the keyboard is locked. I just found yet
another thing that locks it:
edgemaster# kbdcontrol -r fast
*keyboard dies*
> When switching between two plain (non-graphical) vtys, the only
> keyboard I/O taking place is for setting LEDs on the keyboard.
I haven't tried a graphical switch yet, I'll have to compile X.
I am seeing no LED lights. Attempts to turn Numlock on kills the keyboard.
However, using the same keyboard in W2K and all is well.
> Keyboard I/O shouldn't loop inifinitely, as it will timeout if
> necessary I/O operation cannot be completed for some reasons.
>
> Would you boot this kernel by giving "boot -v" at the loader prompt,
> and send me dmesg's output?
I did that, but I see nothing keyboard-related. Sending to you anyway.
Also note that I tried a USB keyboard, and it has *NO* problems.
dmesg follows:
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Sun Aug 5 22:39:25 CDT 2001
root@edgemaster.zombie.org:/usr/obj/usr/src/sys/EDGEMASTER
Calibrating clock(s) ... TSC clock: 1199852428 Hz, i8254 clock: 1192993 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: AMD Athlon(tm) Processor (1200.05-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
Data TLB: 24 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory = 1342111744 (1310656K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x004b3000 - 0x4ffe7fff, 1337151488 bytes (326453 pages)
avail memory = 1300615168 (1270132K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fb010
bios32: Entry = 0xfb480 (c00fb480) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb4b0
pnpbios: Found PnP BIOS data at 0xc00fbf80
pnpbios: Entry = f0000:bfb0 Rev = 1.0
Other BIOS signatures found:
Preloaded elf kernel "kernel" at 0xc048d000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc048d0a8.
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
VESA: information block
56 45 53 41 00 02 ca 6c 00 c0 01 00 00 00 74 69
00 c0 00 02 05 01 df 6c 00 c0 e6 6c 00 c0 f2 6c
00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
VESA: 11 mode(s) found
VESA: v2.0, 32768k memory, flags:0x1, mode table:0xc00c6974 (c0006974)
VESA: Matrox Graphics Inc.
VESA: Matrox Matrox G400 00
Using $PIR table, 9 entries at 0xc00fde50
acpi0: <VT8371 AWRDACPI> on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_pcib0: <Host-PCI bridge> on acpi0
pci0: physical bus=0
map[10]: type 3, range 32, base d5000000, size 24, enabled
found-> vendor=0x1106, dev=0x0305, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x8305, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
found-> vendor=0x1106, dev=0x0686, revid=0x22
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
map[20]: type 4, range 32, base 0000c000, size 4, enabled
found-> vendor=0x1106, dev=0x0571, revid=0x10
bus=0, slot=7, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000c400, size 5, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x10
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
intpin=d, irq=9
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000c800, size 5, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x10
bus=0, slot=7, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
intpin=d, irq=9
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x3057, revid=0x30
bus=0, slot=7, func=4
class=06-00-00, hdrtype=0x00, mfdev=0
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000cc00, size 7, enabled
map[14]: type 1, range 32, base d7000000, size 7, enabled
found-> vendor=0x10b7, dev=0x9004, revid=0x04
bus=0, slot=15, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=5
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000d000, size 8, enabled
map[14]: type 1, range 32, base d7001000, size 8, enabled
found-> vendor=0x11ad, dev=0x0002, revid=0x20
bus=0, slot=17, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=10
map[10]: type 4, range 32, base 0000d400, size 3, enabled
map[14]: type 4, range 32, base 0000d800, size 2, enabled
map[18]: type 4, range 32, base 0000dc00, size 3, enabled
map[1c]: type 4, range 32, base 0000e000, size 2, enabled
map[20]: type 4, range 32, base 0000e400, size 8, enabled
found-> vendor=0x1103, dev=0x0004, revid=0x03
bus=0, slot=19, func=0
class=01-80-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
pci0: <PCI bus> on acpi_pcib0
agp0: <VIA Generic host to PCI bridge> mem 0xd5000000-0xd5ffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 240M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xd2000000-0xd4ffffff
pcib1: prefetched decode 0xd0000000-0xd1ffffff
pci1: physical bus=1
map[10]: type 3, range 32, base d0000000, size 25, enabled
map[14]: type 1, range 32, base d2000000, size 14, enabled
map[18]: type 1, range 32, base d3000000, size 23, enabled
found-> vendor=0x102b, dev=0x0525, revid=0x04
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xc000-0xc00f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xc000
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI probe 00 00
ata0-slave: ATAPI probe 14 eb
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA probe 01 a5
ata0: devices=09
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xc008
ata1: mask=03 ostat0=7f ostat2=7f
ata1-master: ATAPI probe 7f 7f
ata1-slave: ATAPI probe 7f 7f
ata1: mask=03 stat0=7f stat1=7f
ata1-master: ATA probe 7f 7f
ata1-slave: ATA probe 7f 7f
ata1: devices=00
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 9 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 9 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
xl0: <3Com 3c900B-TPO Etherlink XL> port 0xcc00-0xcc7f mem 0xd7000000-0xd700007f irq 5 at device 15.0 on pci0
xl0: Ethernet address: 00:10:5a:c6:b4:e4
xl0: media options word: 8
xl0: guessing 10BaseT transceiver
xl0: found 10baseT
xl0: selecting 10baseT transceiver, half duplex
bpf: xl0 attached
dc0: <82c169 PNIC 10/100BaseTX> port 0xd000-0xd0ff mem 0xd7001000-0xd70010ff irq 10 at device 17.0 on pci0
dc0: Ethernet address: 00:a0:cc:da:5b:b2
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x001018, model 0x0021, rev. 2
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: dc0 attached
atapci1: <HighPoint HPT370 ATA100 controller> port 0xe400-0xe4ff,0xe000-0xe003,0xdc00-0xdc07,0xd800-0xd803,0xd400-0xd407 irq 11 at device 19.0 on pci0
ata-: ata2 already exists, using ata3 instead
ata2: iobase=0xd400 altiobase=0xd802 bmaddr=0xe400
ata2: mask=03 ostat0=50 ostat2=00
ata2-master: ATAPI probe 00 00
ata2-slave: ATAPI probe 00 00
ata2: mask=03 stat0=50 stat1=00
ata2-master: ATA probe 01 a5
ata2: devices=01
ata2: at 0xd400 on atapci1
ata3: iobase=0xdc00 altiobase=0xe002 bmaddr=0xe408
ata3: mask=03 ostat0=20 ostat2=30
ata3-master: ATAPI probe 20 20
ata3-slave: ATAPI probe 30 30
ata3: mask=03 stat0=20 stat1=30
ata3-master: ATA probe 25 25
ata3-slave: ATA probe 25 25
ata3: devices=00
ata3: at 0xdc00 on atapci1
npx0: <math processor> on motherboard
npx0: INT 16 interface
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc-: sc0 already exists, using sc1 instead
vga-: vga0 already exists, using vga1 instead
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcb7ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x2001 0x2011 0x2001 0x2001
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x2001 0x2009 0x2001 0x2001
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0 at vga0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc1: no video adapter found.
sc1: <System console> failed to probe on isa0
vga1: <Generic ISA VGA> failed to probe on isa0
isa_probe_children: probing PnP devices
unknown: <PNP0200> can't assign resources
unknown: <PNP0200> at port 0-0xf,0x80-0x90,0x94-0x9f,0xc0-0xdf drq 2 on isa0
atspeaker0: <AT speaker> at port 0x61 on isa0
unknown: <PNP0700> can't assign resources
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x2e8-0x2ef irq 3 on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x2e8-0x2ef irq 3 on isa0
unknown: <PNP0510> can't assign resources
unknown: <PNP0510> at port 0x2e8-0x2ef irq 3 on isa0
unknown: <PNP0400> can't assign resources
unknown: <PNP0400> at port 0x3bc-0x3bf irq 7 on isa0
unknown: <PNP0401> can't assign resources
unknown: <PNP0401> at port 0x278-0x27f,0x678-0x67b irq 5 on isa0
unknown: <PNP0F13> can't assign resources
unknown: <PNP0F13> at port 0x60 on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0303> at port 0x60 on isa0
BIOS Geometries:
0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
1:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, unlimited logging
bpf: lo0 attached
bpf: ppp0 attached
bpf: ppp1 attached
DUMMYNET initialized (010124)
bpf: stf0 attached
bpf: faith0 attached
IPv6 packet filtering initialized, unlimited logging
IPsec: Initialized Security Association Processing.
IP Filter: v3.4.20 initialized. Default = pass all, Logging = enabled
acpi_cpu0: set speed to 100.0%
acpi_cpu: CPU throttling enabled, 2 steps from 100% to 50.0%
ad0: success setting UDMA4 on VIA chip
Creating DISK ad0
ad0: <Maxtor 92041U4/FA520S60> ATA-5 disk at ata0-master
ad0: 19541MB (40020624 sectors), 39703 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA66
ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
ad1: success setting UDMA5 on HighPoint chip
Creating DISK ad1
HighPoint check1 failed
ad1: <IBM-DTLA-307060/TX8OA50C> ATA-5 disk at ata2-master
ad1: 58644MB (120103200 sectors), 119150 C, 16 H, 63 S, 512 B
ad1: 16 secs/int, 1 depth queue, UDMA100
ad1: piomode=4 dmamode=2 udmamode=5 cblid=1
ata0-slave: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata0-slave: success setting PIO4 on generic chip
acd0: <SONY CD-RW CRX140E/1.0n> CD-RW drive at ata0 as slave
acd0: read 5512KB/s (3271KB/s) write 1377KB/s (1377KB/s), 4096KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Writes: CD-R, CD-RW, test write
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable trayacd0: Medium: no/blank disc, unlocked
Mounting root from ufs:/dev/ad1s1a
ad1s1: type 0xa5, start 63, end = 120101939, size 120101877 : OK
start_init: trying /sbin/init
ad0s1: type 0xa5, start 63, end = 40017914, size 40017852 : OK
ad0s1: type 0xa5, start 63, end = 40017914, size 40017852 : OK
ad0s1: type 0xa5, start 63, end = 40017914, size 40017852 : OK
dc0: failed to force tx and rx to idle state
dc0: failed to force tx and rx to idle state
dc0: failed to force tx and rx to idle state
splash: image decoder found: green_saver
Linux ELF exec handler installed
--
Sean Kelly | PGP KeyID: 77042C7B
smkelly@zombie.org | http://www.zombie.org
For PGP key, send e-mail with subject "send pgp key"
[-- Attachment #2 --]
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (FreeBSD)
iD8DBQE7dNM/2aukpHcELHsRAgmvAJ9TxmMMFH56uSyg2f0t2v0DQhLrXgCgkJ4c
alp6gGTkrY6sLDk7TdvPXE4=
=0Umu
-----END PGP SIGNATURE-----
help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010811013959.A588>