Date: Tue, 20 Oct 2015 15:31:28 +0200 From: Marc Santhoff <M.Santhoff@web.de> To: Erich Dollansky <erich@alogt.com> Cc: "FreeBSD stable (Liste)" <freebsd-stable@freebsd.org> Subject: Re: 9-STABLE showing disk timeouts Message-ID: <1445347888.16844.11.camel@puma.das.netz> In-Reply-To: <20151020082127.309857cf@X220.alogt.com> References: <1445270715.2201.13.camel@puma.das.netz> <20151020082127.309857cf@X220.alogt.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Di, 2015-10-20 at 08:21 +0800, Erich Dollansky wrote: > Hi, Hi Erich and list members, > On Mon, 19 Oct 2015 18:05:15 +0200 > Marc Santhoff <M.Santhoff@web.de> wrote: > > > What is happening there and why? > > I have the same problem with one specific connection. Can you check the > cable? Can you switch to another connector? I'm relatively sure the cable is OK. I'm aware of SATA cable problems, the "standard" specifies only 50 plugging cycles (or was it 15?). When in charge new cables are used. When the computer is not brand new, the sockets are cleaned at first. BUT, when running the older FreeBSD 9 using the old disc driver anything works. I know, because an xterm with "tail -f /var/log/messages" is running very often and I'd have seen this error before - which I haven't. > > Do I need to worry? > > Not, if it was the connection. Hmmm... For reference: marc@puma:/home/marc > dmesg|grep ata atapci0: <JMicron JMB361 UDMA133 controller> port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem 0xfe8fa000-0xfe8fbfff irq 18 at device 0.0 on pci3 atapci1: <AHCI SATA controller> at channel -1 on atapci0 atapci1: AHCI v1.00 controller with 2 3Gbps ports, PM supported ata2: <ATA channel> on atapci1 ata3: <ATA channel> on atapci1 ata4: <ATA channel> at channel 0 on atapci0 atapci2: <ATI IXP700/800 SATA300 controller> port 0xb000-0xb007,0xa000-0xa003,0x9000-0x9007,0x8000-0x8003,0x7000-0x700f mem 0xfe4ffc00-0xfe4fffff irq 19 at device 17.0 on pci0 atapci2: AHCI v1.20 controller with 4 6Gbps ports, PM supported ata5: <ATA channel> at channel 0 on atapci2 ata6: <ATA channel> at channel 1 on atapci2 ata7: <ATA channel> at channel 2 on atapci2 ata8: <ATA channel> at channel 3 on atapci2 atapci3: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0 ata0: <ATA channel> at channel 0 on atapci3 ata1: <ATA channel> at channel 1 on atapci3 acd0: DVDR <Optiarc DVD RW AD-7241S/1.03> at ata0-slave UDMA100 SATA ad10: 114473MB <OCZ-AGILITY2 3.5 1.25> at ata5-master UDMA100 SATA 3Gb/s ad12: 1907729MB <TOSHIBA DT01ACA200 MX4OABB0> at ata6-master UDMA100 SATA 6Gb/s ad16: 228936MB <OCZ ARC100 1.01> at ata8-master UDMA100 SATA 6Gb/s cd0 at ata0 bus 0 scbus0 target 1 lun 0 marc@puma:/home/marc > grep timeout /var/log/messages marc@puma:/home/marc > zgrep timeout /var/log/messages* marc@puma:/home/marc > marc@puma:/home/marc > uname -mrs FreeBSD 9.1-STABLE amd64 -- Marc Santhoff <M.Santhoff@web.de>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1445347888.16844.11.camel>