Date: Sat, 22 Feb 2020 17:03:15 +0100 From: Palle Girgensohn <girgen@pingpong.se> To: freebsd-drivers@freebsd.org Subject: Suspecting a problem with mfi Megaraid SAS driver in 12.1 Message-ID: <28ABA1F8-90BD-4556-B9ED-92638CA838E6@pingpong.se>
index | next in thread | raw e-mail
Hi! We updated a Fujisti server Friday morning from FreeBSD 11.2 -> 12.1 and we are seeing problems with the storage. It as rather large, ~ 50 TB, ZFS volume. After upgrading, it complains about chksum errors and has rebooted spontaneous twice in ~48 hours. Since it just happend after upgrading the OS, and since it happens on several disks, I primarily suspect there is a software error. That is because that is all that has changed. It could also be the controller of course, and in that case triggered by the intentional reboots as part of the upgrade, but I pursuing both options at the moment. It is a FTS PRAID CP400i controller, identified in FreeBSD to use the mfi driver. It is configured as JBOD, no RAID at all, and *not* using gpart. Any ideas or tips will be greatly appreciated. Palle $ grep mfi /boot/loader.conf mfip_load="yes" $ freebsd-version -ku 12.1-RELEASE-p2 12.1-RELEASE-p2 $ uname -iKmoprsUv FreeBSD 12.1-RELEASE-p2 FreeBSD 12.1-RELEASE-p2 GENERIC amd64 amd64 GENERIC 1201000 1201000 $ zpool status -v pool: tank state: DEGRADED status: One or more devices is currently being resilvered. The pool will continue to function, possibly in a degraded state. action: Wait for the resilver to complete. scan: resilver in progress since Sat Feb 22 14:03:32 2020 184G scanned at 18,9M/s, 79,2G issued at 8,14M/s, 15,8T total 1,97G resilvered, 0,49% done, no estimated completion time config: NAME STATE READ WRITE CKSUM tank DEGRADED 0 0 0 raidz2-0 DEGRADED 0 0 0 mfisyspd0 ONLINE 0 0 7 mfisyspd1 ONLINE 0 0 5 mfisyspd2 ONLINE 0 0 8 mfisyspd3 DEGRADED 0 0 12 too many errors mfisyspd4 ONLINE 0 0 8 mfisyspd5 ONLINE 0 0 5 raidz2-1 DEGRADED 0 0 0 mfisyspd6 ONLINE 0 0 5 spare-1 DEGRADED 0 0 97 mfisyspd7 DEGRADED 0 0 0 too many errors mfisyspd11 ONLINE 0 0 0 mfisyspd8 ONLINE 0 0 5 mfisyspd9 ONLINE 0 0 18 mfisyspd10 DEGRADED 0 0 13 too many errors logs mirror-2 ONLINE 0 0 0 mfisyspd12p4 ONLINE 0 0 0 mfisyspd13p4 ONLINE 0 0 0 cache mfisyspd12p5 ONLINE 0 0 0 mfisyspd13p5 ONLINE 0 0 0 spares 11621498950123571546 INUSE was /dev/mfisyspd11 errors: No known data errors from /var/log/messages: Feb 22 14:07:41 hostname kernel: mfisyspd9: hard error cmd=read 2855317293-2855317844 Feb 22 14:07:41 hostname kernel: mfi0: I/O error, cmd=0xfffffe00a8e80198, status=0x3c, scsi_status=0 Feb 22 14:07:41 hostname kernel: mfi0: sense error 112, sense_key 5, asc 32, ascq 0 Feb 22 14:07:41 hostname kernel: mfisyspd6: hard error cmd=read 2855318195-2855318746 Feb 22 14:07:42 hostname kernel: mfi0: I/O error, cmd=0xfffffe00a8e83fc0, status=0x3c, scsi_status=0 Feb 22 14:07:42 hostname kernel: mfi0: sense error 114, sense_key 4, asc 207, ascq 0 Feb 22 14:07:42 hostname kernel: mfisyspd5: hard error cmd=read 6047123871-6047124388 Feb 22 14:07:42 hostname kernel: mfi0: I/O error, cmd=0xfffffe00a8e802a8, status=0x3c, scsi_status=0 Feb 22 14:07:42 hostname kernel: mfi0: sense error 114, sense_key 4, asc 207, ascq 0 Feb 22 14:07:42 hostname kernel: mfisyspd2: hard error cmd=read 6047123872-6047124389 Feb 22 14:07:43 hostname kernel: mfi0: I/O error, cmd=0xfffffe00a8e80330, status=0x3c, scsi_status=0 Feb 22 14:07:43 hostname kernel: mfi0: sense error 114, sense_key 4, asc 207, ascq 0 Feb 22 14:07:43 hostname kernel: mfisyspd8: hard error cmd=read 2906458877-2906459428 Feb 22 14:07:43 hostname kernel: mfi0: I/O error, cmd=0xfffffe00a8e82f48, status=0x3c, scsi_status=0 Feb 22 14:07:43 hostname kernel: mfi0: sense error 114, sense_key 4, asc 0, ascq 0 Feb 22 14:07:43 hostname kernel: mfisyspd8: hard error cmd=read 2906459429-2906459980 Feb 22 14:07:43 hostname kernel: mfi0: I/O error, cmd=0xfffffe00a8e82420, status=0x3c, scsi_status=0 Feb 22 14:07:43 hostname kernel: mfi0: sense error 112, sense_key 5, asc 32, ascq 0 Feb 22 14:07:43 hostname kernel: mfisyspd8: hard error cmd=read 2906459981-2906460532 Feb 22 14:07:43 hostname kernel: mfi0: I/O error, cmd=0xfffffe00a8e83960, status=0x3c, scsi_status=0 Feb 22 14:07:43 hostname kernel: mfi0: sense error 114, sense_key 4, asc 207, ascq 0 Feb 22 14:07:43 hostname kernel: mfisyspd0: hard error cmd=read 412266548-412267099 Feb 22 14:07:43 hostname kernel: mfi0: I/O error, cmd=0xfffffe00a8e80220, status=0x3c, scsi_status=0 Feb 22 14:07:43 hostname kernel: mfi0: sense error 112, sense_key 5, asc 32, ascq 0 Feb 22 14:07:43 hostname kernel: mfisyspd0: hard error cmd=read 412267100-412267651 Feb 22 14:07:49 hostname kernel: mfi0: I/O error, cmd=0xfffffe00a8e815c8, status=0x3c, scsi_status=0 Feb 22 14:07:49 hostname kernel: mfi0: sense error 114, sense_key 4, asc 207, ascq 0 Feb 22 14:07:49 hostname kernel: mfisyspd8: hard error cmd=read 2959727577-2959728128 Feb 22 14:07:49 hostname kernel: mfi0: I/O error, cmd=0xfffffe00a8e81ed0, status=0x3c, scsi_status=0 Feb 22 14:07:49 hostname kernel: mfi0: sense error 112, sense_key 5, asc 32, ascq 0 Feb 22 14:07:49 hostname kernel: mfisyspd1: hard error cmd=read 7610749043-7610749594 Feb 22 14:07:49 hostname kernel: mfi0: I/O error, cmd=0xfffffe00a8e82f48, status=0x3c, scsi_status=0 Feb 22 14:07:49 hostname kernel: mfi0: sense error 114, sense_key 4, asc 0, ascq 0 Feb 22 14:07:49 hostname kernel: mfisyspd3: hard error cmd=read 4882180734-4882181285 Feb 22 14:07:51 hostname kernel: mfi0: I/O error, cmd=0xfffffe00a8e82b90, status=0x3c, scsi_status=0 Feb 22 14:07:51 hostname kernel: mfi0: sense error 114, sense_key 4, asc 207, ascq 0 Feb 22 14:07:51 hostname kernel: mfisyspd9: hard error cmd=read 1041218706-1041219257 Feb 22 14:07:51 hostname kernel: mfi0: I/O error, cmd=0xfffffe00a8e80c38, status=0x3c, scsi_status=0 Feb 22 14:07:51 hostname kernel: mfi0: sense error 114, sense_key 4, asc 207, ascq 0 Feb 22 14:07:51 hostname kernel: mfisyspd9: hard error cmd=read 1041219258-1041219809 Feb 22 14:07:52 hostname kernel: mfi0: I/O error, cmd=0xfffffe00a8e837c8, status=0x3c, scsi_status=0 Feb 22 14:07:52 hostname kernel: mfi0: sense error 112, sense_key 5, asc 32, ascq 0 Feb 22 14:07:52 hostname kernel: mfisyspd6: hard error cmd=read 2960038937-2960039488 Feb 22 14:07:52 hostname kernel: mfi0: I/O error, cmd=0xfffffe00a8e81e48, status=0x3c, scsi_status=0 Feb 22 14:07:52 hostname kernel: mfi0: sense error 114, sense_key 4, asc 0, ascq 0 Feb 22 14:07:52 hostname kernel: mfisyspd6: hard error cmd=read 2960039489-2960040040 Feb 22 14:07:52 hostname kernel: mfi0: I/O error, cmd=0xfffffe00a8e82d28, status=0x3c, scsi_status=0 Feb 22 14:07:52 hostname kernel: mfi0: sense error 114, sense_key 4, asc 207, ascq 0 Feb 22 14:07:52 hostname kernel: mfisyspd6: hard error cmd=read 2960040041-2960040592 Feb 22 14:08:13 hostname kernel: mfi0: I/O error, cmd=0xfffffe00a8e83960, status=0x3c, scsi_status=0 Feb 22 14:08:13 hostname kernel: mfi0: sense error 114, sense_key 4, asc 207, ascq 0 Feb 22 14:08:13 hostname kernel: mfisyspd7: hard error cmd=read 2906939820-2906940371 Feb 22 14:08:13 hostname kernel: mfi0: I/O error, cmd=0xfffffe00a8e80908, status=0x3c, scsi_status=0 Feb 22 14:08:13 hostname kernel: mfi0: sense error 112, sense_key 5, asc 32, ascq 0 Feb 22 14:08:13 hostname kernel: mfisyspd1: hard error cmd=read 412681365-412681916 Feb 22 14:08:42 hostname kernel: mfi0: I/O error, cmd=0xfffffe00a8e82860, status=0x3c, scsi_status=0 Feb 22 14:08:42 hostname kernel: mfi0: sense error 114, sense_key 4, asc 207, ascq 0 Feb 22 14:08:42 hostname kernel: mfisyspd9: hard error cmd=read 2857339961-2857340492 Feb 22 14:08:47 hostname kernel: mfi0: I/O error, cmd=0xfffffe00a8e82ec0, status=0x3c, scsi_status=0 Feb 22 14:08:47 hostname kernel: mfi0: sense error 114, sense_key 4, asc 0, ascq 0 Feb 22 14:08:47 hostname kernel: mfisyspd7: hard error cmd=read 1041524253-1041524786 Feb 22 14:09:01 hostname kernel: mfi0: I/O error, cmd=0xfffffe00a8e82068, status=0x3c, scsi_status=0 Feb 22 14:09:01 hostname kernel: mfi0: sense error 112, sense_key 5, asc 32, ascq 0 Feb 22 14:09:01 hostname kernel: mfisyspd1: hard error cmd=read 7619627390-7619627941 Feb 22 14:09:13 hostname kernel: mfi0: I/O error, cmd=0xfffffe00a8e838d8, status=0x3c, scsi_status=0 Feb 22 14:09:13 hostname kernel: mfi0: sense error 114, sense_key 4, asc 0, ascq 0 Feb 22 14:09:13 hostname kernel: mfisyspd10: hard error cmd=read 2960045475-2960046026 Feb 22 14:10:27 hostname kernel: mfi0: I/O error, cmd=0xfffffe00a8e80e58, status=0x3c, scsi_status=0 Feb 22 14:10:27 hostname kernel: mfi0: sense error 114, sense_key 4, asc 207, ascq 0 Feb 22 14:10:27 hostname kernel: mfisyspd7: hard error cmd=read 2906360948-2906361499 $ dmesg| grep mfi mfi0: <Fury> port 0x6000-0x60ff mem 0xc7b00000-0xc7b0ffff,0xc7a00000-0xc7afffff irq 26 at device 0.0 numa-domain 0 on pci3 mfi0: Using MSI mfi0: Megaraid SAS driver Ver 4.23 mfi0: FW MaxCmds = 240, limiting to 128 mfi0: MaxCmd = 240, Drv MaxCmd = 128, MaxSgl = 70, state = 0xb73c00f0 mfi0: 1923 (635692256s/0x0020/info) - Shutdown command received from host mfip0: mfi0: 1924 (boot + 9s/0x0020/info) - Firmware initialization started (PCI ID 005f/1000/1211/1734) mfi0: 1925 (boot + 9s/0x0020/info) - Firmware version 4.250.01-3869 mfi0: 1926 (boot + 11s/0x0020/info) - Package version 24.5.0-0031 mfi0: 1927 (boot + 11s/0x0020/info) - Board Revision mfi0: 1928 (boot + 59s/0x0004/info) - Enclosure (SES) discovered on PD 07(c Port 0 - 3/p1) mfi0: 1929 (boot + 60s/0x0004/info) - Enclosure PD 07(c Port 0 - 3/p1) communication restored <SCSI Passthrough Bus> numa-domain 0 on mfi0 mfi0: 1930 (boot + 60s/0x0002/info) - Inserted: Encl PD 07 mfi1: <Invader> port 0xf000-0xf0ff mem 0xfbe00000-0xfbe0ffff,0xfbd00000-0xfbdfffff irq 50 at device 0.0 numa-domain 1 on pci10 mfi1: Using MSI mfi1: Megaraid SAS driver Ver 4.23 mfi1: FW MaxCmds = 928, limiting to 128 mfi1: MaxCmd = 928, Drv MaxCmd = 128, MaxSgl = 70, state = 0xb75003a0 mfi1: cmd_tbolt 0xfffff80004c37c00 has invalid sync_cmd_idx=128 - skipping mfip1: <SCSI Passthrough Bus> numa-domain 1 on mfi1 mfisyspd0 numa-domain 0 on mfi0 mfisyspd0: 3815447MB (7814037168 sectors) SYSPD volume (deviceid: 8) mfisyspd0: SYSPD volume attached mfisyspd1 numa-domain 0 on mfi0 mfisyspd1: 3815447MB (7814037168 sectors) SYSPD volume (deviceid: 9) mfisyspd1: SYSPD volume attached mfisyspd2 numa-domain 0 on mfi0 mfisyspd2: 3815447MB (7814037168 sectors) SYSPD volume (deviceid: 10) mfisyspd2: SYSPD volume attached mfisyspd3 numa-domain 0 on mfi0 mfisyspd3: 3815447MB (7814037168 sectors) SYSPD volume (deviceid: 11) mfisyspd3: SYSPD volume attached mfisyspd4 numa-domain 0 on mfi0 mfisyspd4: 3815447MB (7814037168 sectors) SYSPD volume (deviceid: 12) mfisyspd4: SYSPD volume attached mfisyspd5 numa-domain 0 on mfi0 mfisyspd5: 3815447MB (7814037168 sectors) SYSPD volume (deviceid: 13) mfisyspd5: SYSPD volume attached mfisyspd6 numa-domain 0 on mfi0 mfisyspd6: 3815447MB (7814037168 sectors) SYSPD volume (deviceid: 14) mfisyspd6: SYSPD volume attached mfisyspd7 numa-domain 0 on mfi0 mfisyspd7: 3815447MB (7814037168 sectors) SYSPD volume (deviceid: 15) mfisyspd7: SYSPD volume attached mfisyspd8 numa-domain 0 on mfi0 mfisyspd8: 3815447MB (7814037168 sectors) SYSPD volume (deviceid: 16) mfisyspd8: SYSPD volume attached mfisyspd9 numa-domain 0 on mfi0 mfisyspd9: 3815447MB (7814037168 sectors) SYSPD volume (deviceid: 17) mfisyspd9: SYSPD volume attached mfisyspd10 numa-domain 0 on mfi0 mfisyspd10: 3815447MB (7814037168 sectors) SYSPD volume (deviceid: 18) mfisyspd10: SYSPD volume attached GEOM: mfisyspd0: the primary GPT table is corrupt or invalid. GEOM: mfisyspd0: using the secondary instead -- recovery strongly advised. mfisyspd11 numa-domain 0 on mfi0 mfisyspd11: 3815447MB (7814037168 sectors) SYSPD volume (deviceid: 19) mfisyspd11: SYSPD volume attached mfi0: 1931 (boot + 60s/0x0002/info) - Inserted: PD 07(c Port 0 - 3/p1) Info: enclPd=07, scsiType=d, portMap=00, sasAddr=500605b0000272bd,0000000000000000 mfi0: 1932 (boot + 60s/0x0002/info) - Inserted: PD 08(e0x07/s3) mfisyspd12 numa-domain 1 on mfi1 mfisyspd12: 114473MB (234441648 sectors) SYSPD volume (deviceid: 0) mfisyspd12: SYSPD volume attached mfisyspd13 numa-domain 1 on mfi1 mfisyspd13: 114473MB (234441648 sectors) SYSPD volume (deviceid: 1) mfisyspd13: SYSPD volume attached mfi0: 1933 (boot + 60s/0x0002/info) - Inserted: PD 08(e0x07/s3) Info: enclPd=07, scsiType=0, portMap=00, sasAddr=5000c5006308fbed,0000000000000000 mfi0: 1934 (boot + 60s/0x0002/info) - Inserted: PD 09(e0x07/s5) mfi0: 1935 (boot + 60s/0x0002/info) - Inserted: PD 09(e0x07/s5) Info: enclPd=07, scsiType=0, portMap=00, sasAddr=5000c5006309019d,0000000000000000 mfi0: 1936 (boot + 60s/0x0002/info) - Inserted: PD 0a(e0x07/s1) mfi0: 1937 (boot + 60s/0x0002/info) - Inserted: PD 0a(e0x07/s1) Info: enclPd=07, scsiType=0, portMap=00, sasAddr=5000c5006308fd8d,0000000000000000 mfi0: 1938 (boot + 60s/0x0002/info) - Inserted: PD 0b(e0x07/s0) mfi0: 1939 (boot + 60s/0x0002/info) - Inserted: PD 0b(e0x07/s0) Info: enclPd=07, scsiType=0, portMap=00, sasAddr=5000c50063090d45,0000000000000000 mfi0: 1940 (boot + 60s/0x0002/info) - Inserted: PD 0c(e0x07/s4) mfi0: 1941 (boot + 60s/0x0002/info) - Inserted: PD 0c(e0x07/s4) Info: enclPd=07, scsiType=0, portMap=00, sasAddr=5000c5006308f981,0000000000000000 mfi0: 1942 (boot + 60s/0x0002/info) - Inserted: PD 0d(e0x07/s2) mfi0: 1943 (boot + 60s/0x0002/info) - Inserted: PD 0d(e0x07/s2) Info: enclPd=07, scsiType=0, portMap=00, sasAddr=5000c500630910c1,0000000000000000 mfi0: 1944 (boot + 60s/0x0002/info) - Inserted: PD 0e(e0x07/s8) mfi0: 1945 (boot + 60s/0x0002/info) - Inserted: PD 0e(e0x07/s8) Info: enclPd=07, scsiType=0, portMap=00, sasAddr=50000c0f01f7efb6,0000000000000000 mfi0: 1946 (boot + 60s/0x0002/info) - Inserted: PD 0f(e0x07/s7) mfi0: 1947 (boot + 60s/0x0002/info) - Inserted: PD 0f(e0x07/s7) Info: enclPd=07, scsiType=0, portMap=00, sasAddr=5000c50083c1a0a1,0000000000000000 mfi0: 1948 (boot + 60s/0x0002/info) - Inserted: PD 10(e0x07/s6) mfi0: 1949 (boot + 60s/0x0002/info) - Inserted: PD 10(e0x07/s6) Info: enclPd=07, scsiType=0, portMap=00, sasAddr=5000c50083c19bb9,0000000000000000 mfi0: 1950 (boot + 60s/0x0002/info) - Inserted: PD 11(e0x07/s11) mfi0: 1951 (boot + 60s/0x0002/info) - Inserted: PD 11(e0x07/s11) Info: enclPd=07, scsiType=0, portMap=00, sasAddr=5000c50083c19e19,0000000000000000 mfi0: 1952 (boot + 60s/0x0002/info) - Inserted: PD 12(e0x07/s10) mfi0: 1953 (boot + 60s/0x0002/info) - Inserted: PD 12(e0x07/s10) Info: enclPd=07, scsiType=0, portMap=00, sasAddr=50000c0f01e251e2,0000000000000000 mfi0: 1954 (boot + 60s/0x0002/info) - Inserted: PD 13(e0x07/s9) mfi0: 1955 (boot + 60s/0x0002/info) - Inserted: PD 13(e0x07/s9) Info: enclPd=07, scsiType=0, portMap=00, sasAddr=50000c0f0136664e,0000000000000000 mfi0: 1956 (635692335s/0x0020/info) - Time established as 02/22/20 13:12:15; (66 seconds since power on) GEOM: mfisyspd1: the primary GPT table is corrupt or invalid. GEOM: mfisyspd1: using the secondary instead -- recovery strongly advised. mfi1: 1440 (635692257s/0x0020/info) - Shutdown command received from host mfi1: 1441 (boot + 9s/0x0020/info) - Firmware initialization started (PCI ID 005d/1000/1212/1734) mfi1: 1442 (boot + 9s/0x0020/info) - Firmware version 4.250.00-3868 mfi1: 1443 (boot + 10s/0x0008/info) - Battery Present mfi1: 1444 (boot + 10s/0x0020/info) - Package version 24.5.0-0031 mfi1: 1445 (boot + 10s/0x0020/info) - Board Revision mfi1: 1446 (boot + 14s/0x0008/info) - Battery charge complete mfi1: 1447 (boot + 14s/0x0008/info) - Battery temperature is normal mfi1: 1448 (boot + 46s/0x0002/info) - Inserted: PD 00(e0xfc/s0) mfi1: 1449 (boot + 46s/0x0002/info) - Inserted: PD 00(e0xfc/s0) Info: enclPd=fc, scsiType=0, portMap=00, sasAddr=4433221102000000,0000000000000000 mfi1: 1450 (boot + 46s/0x0002/info) - Inserted: PD 01(e0xfc/s1) mfi1: 1451 (boot + 46s/0x0002/info) - Inserted: PD 01(e0xfc/s1) Info: enclPd=fc, scsiType=0, portMap=01, sasAddr=4433221103000000,0000000000000000 mfi1: 1452 (635692353s/0x0020/info) - Time established as 02/22/20 13:12:33; (82 seconds since power on) GEOM: mfisyspd2: the primary GPT table is corrupt or invalid. GEOM: mfisyspd2: using the secondary instead -- recovery strongly advised. GEOM: mfisyspd3: the primary GPT table is corrupt or invalid. GEOM: mfisyspd3: using the secondary instead -- recovery strongly advised. ses0 at mfi0 bus 0 scbus0 target 7 lun 0 pass1 at mfi0 bus 0 scbus0 target 8 lun 0 pass2 at mfi0 bus 0 scbus0 target 9 lun 0 pass3 at mfi0 bus 0 scbus0 target 10 lun 0 pass4 at mfi0 bus 0 scbus0 target 11 lun 0 pass5 at mfi0 bus 0 scbus0 target 12 lun 0 GEOM: mfisyspd4: the primary GPT table is corrupt or invalid. pass6 at mfi0 bus 0 scbus0 target 13 lun 0 pass7 at mfi0 bus 0 scbus0 target 14 lun 0 pass8 at mfi0 bus 0 scbus0 target 15 lun 0 pass9 at mfi0 bus 0 scbus0 target 16 lun 0 pass10 at mfi0 bus 0 scbus0 target 17 lun 0 pass11 at mfi0 bus 0 scbus0 target 18 lun 0 pass12 at mfi0 bus 0 scbus0 target 19 lun 0 pass13 at mfi1 bus 0 scbus11 target 0 lun 0 pass14 at mfi1 bus 0 scbus11 target 1 lun 0 GEOM: mfisyspd4: using the secondary instead -- recovery strongly advised. GEOM: mfisyspd5: the primary GPT table is corrupt or invalid. GEOM: mfisyspd5: using the secondary instead -- recovery strongly advised. GEOM: mfisyspd0: the primary GPT table is corrupt or invalid. GEOM: mfisyspd0: using the secondary instead -- recovery strongly advised. GEOM: mfisyspd1: the primary GPT table is corrupt or invalid. GEOM: mfisyspd1: using the secondary instead -- recovery strongly advised. GEOM: mfisyspd2: the primary GPT table is corrupt or invalid. GEOM: mfisyspd2: using the secondary instead -- recovery strongly advised. GEOM: mfisyspd3: the primary GPT table is corrupt or invalid. GEOM: mfisyspd3: using the secondary instead -- recovery strongly advised. GEOM: mfisyspd4: the primary GPT table is corrupt or invalid. GEOM: mfisyspd4: using the secondary instead -- recovery strongly advised. GEOM: mfisyspd5: the primary GPT table is corrupt or invalid. GEOM: mfisyspd5: using the secondary instead -- recovery strongly advised.home | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?28ABA1F8-90BD-4556-B9ED-92638CA838E6>