Date: Tue, 11 Nov 2014 19:00:18 +0100 From: Andreas Nilsson <andrnils@gmail.com> To: Dmitry Morozovsky <marck@rinet.ru> Cc: FreeBSD Stable Mailing List <freebsd-stable@freebsd.org> Subject: Re: SuperMicro IPMI/SOL and ipmitool troubles Message-ID: <CAPS9%2BSum%2BuK9OqCtXA7KVvRnVcaRZKvA0DD2506Euapsba9MeA@mail.gmail.com> In-Reply-To: <alpine.BSF.2.00.1411112022500.25949@woozle.rinet.ru> References: <alpine.BSF.2.00.1411112022500.25949@woozle.rinet.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Nov 11, 2014 at 6:30 PM, Dmitry Morozovsky <marck@rinet.ru> wrote: > Dear colleagues, > > I'm trying to set up sol console for supermicro servers, reading some > documents > including TestClusterOne, mainly: > > > For serial redirection to work, in the BIOS you need to redirect to com > port > > B and in /boot/device.hints you need hint.uart.1.flags="0x10" and enable > getty on > > cuau1 > > I can see BIOS screen ok; boot1/2 and boot/loader work fine also. > However, I > could not see kernel console output via SOL, neither getty on ttyu1 works. > I tried different speeds, std vs 3wire, explicitely set console=comconsole > vidconsole -- no luck. > > I even trued to use `ipmitool sol activate' on one side and `tip -115200 > com2' > on the other -- stiil no data between. > > Any hints? > > Thanks! > > For the reference: > > marck@centipede:~> ipmitool -H mc26.int -U root -I lanplus sol info > Password: > Set in progress : set-complete > Enabled : true > Force Encryption : false > Force Authentication : false > Privilege Level : USER > Character Accumulate Level (ms) : 0 > Character Send Threshold : 0 > Retry Count : 0 > Retry Interval (ms) : 0 > Volatile Bit Rate (kbps) : 115.2 > Non-Volatile Bit Rate (kbps) : 115.2 > Payload Channel : 1 (0x01) > Payload Port : 623 > > > -- > Sincerely, > D.Marck [DM5020, MCK-RIPE, DM3-RIPN] > [ FreeBSD committer: marck@FreeBSD.org ] > ------------------------------------------------------------------------ > *** Dmitry Morozovsky --- D.Marck --- Wild Woozle --- marck@rinet.ru *** > ------------------------------------------------------------------------ > Which version? 8/9/10-stable? On 9.3,9-stable,10.0,10-stable I have similar issues with serial emulation on HP iLO. I'm about to upgrade a supermicro box to 9.3, hopefully it will happen in a few hours. I'll get back with the results. Best regards Andreas
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAPS9%2BSum%2BuK9OqCtXA7KVvRnVcaRZKvA0DD2506Euapsba9MeA>