Date: Sat, 16 Nov 1996 12:31:10 -0800 (PST) From: Mike Parks <admin@linkeasy.net> To: isp@freebsd.org Subject: Re: FreeBSD and Computone Message-ID: <199611162031.MAA17166@orka.linkeasy.net>
next in thread | raw e-mail | index | archive | help
>Date: Sat, 16 Nov 1996 12:30:36 >To: Neal Horman <neal@doitnow.com> >From: Mike Parks <admin@mail.linkeasy.net> >Subject: Re: FreeBSD and Computone > >My problem is solved. Thanks, it was a problem with remote profiles configured in TS. or I should say lack of them... > > >At 06:20 PM 11/15/96 -0700, you wrote: >>Hello Mike, >> >> I just recently went though this same problem. >> >> It boils down to... If you configure ppp ports from scratch >>at least... (remote profiles, and "configure port") after you have booted >>the TS, then you must reboot the TS, because it only alocates enough >>memory per remote profile, as you have configured at the time of boot. :( >> >> Also take the opportunity to upgrade the software in the rack at >>the same time. You'll need to make sure that you tftp from a server >>somewhere to do it though. And you'll know that you can do that >>successfully if you can save your rack configuration to a tftp server >>successfully. >> >> When i looked last week (ftp://ftp.computone.com/pub/other/iserver/rac15*) >>the latest version of the rack kernel was rac151c. >> >>---------- >>Neal Horman System Admin. >>InternetNow http://www.doitnow.com >> >> >>On Fri, 15 Nov 1996, Mike Parks wrote: >> >>> Date: Fri, 15 Nov 1996 14:19:37 -0800 (PST) >>> From: Mike Parks <admin@linkeasy.net> >>> To: freebsd-isp@freebsd.org, freebsd-questions@freebsd.org >>> Subject: FreeBSD and Computone >>> >>> I am using a 64 port Computone Intelliserver and USR sportster modems. My >>> server is is FreeBSD 2.1.5 . I am having a problem with dial in and I am not >>> sure if it is in the Terminal server or my FreeBSD box. >>> >>> I can authenticate the first ppp dial up connection with no problem, but >>> when a second user dials in the modem picks up, the server prompts for usr >>> name and password then disconnects every time. I have tested each port by >>> dialing in directly and each works but when I try to dial in a second user >>> it wont let him into any port. >>> >>> If anyone can help I need it >>> >>> Mike Parks >>> Network Sciences Corporation >>> 1140 Westwood Blvd suite 208 >>> Los Angeles Ca 90025 >>> 310-208-7233 >>> >> >> >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199611162031.MAA17166>