Date: Sat, 25 May 1996 09:11:29 +0000 () From: "Eric J. Chet" <ejc@gargoyle.bazzle.com> To: freebsd-current@freebsd.org Cc: dyson@freebsd.org Subject: -current panic 5/25 kernel Message-ID: <Pine.BSI.3.93.960525090335.236A-100000@gargoyle>
next in thread | raw e-mail | index | archive | help
Hello
I just made a kernel as of 8:30am EDT 5/25, the system paniced
very quickly with no load on the system.
Panic freeing held page, count=1, pindex=32(0x20)
Eric J. Chet - ejc@bazzle.com - Powered by FreeBSD
Lucent Technologies, Bell Labs Innovations - ejc@nasvr1.cb.att.com
Columbus, Ohio 43213 RM 1E222
--dmesg
FreeBSD 2.2-CURRENT #0: Wed May 22 21:18:54 1996
ejc@gargoyle.bazzle.com:/var/usr/src/sys/compile/gargoyle
Calibrating clock(s) relative to mc146818A clock ... failed, using default i8254 clock of 1193182 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CPU: i486DX (486-class CPU)
Origin = "AuthenticAMD" Id = 0x4e4
real memory = 33554432 (32768K bytes)
avail memory = 31440896 (30704K bytes)
Probing for devices on PCI bus 0:
chip0 <Intel 82424ZX (Saturn) cache DRAM controller> rev 4 on pci0:0
chip1 <Intel 82378ZB PCI-ISA bridge> rev 3 on pci0:2
ncr0 <ncr 53c825 wide scsi> rev 2 int a irq 11 on pci0:5
ncr0 waiting for scsi devices to settle
(ncr0:0:0): "SEAGATE ST15150W 0020" type 0 fixed SCSI 2
sd0(ncr0:0:0): Direct-Access
sd0(ncr0:0:0): WIDE SCSI (16 bit) enabled.
sd0(ncr0:0:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8.
4095MB (8388315 512 byte sectors)
(ncr0:1:0): "QUANTUM LP240S GM240S01X 6.4" type 0 fixed SCSI 2
sd1(ncr0:1:0): Direct-Access
sd1(ncr0:1:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8.
234MB (479350 512 byte sectors)
(ncr0:2:0): "PLEXTOR CD-ROM DM-XX28 3.08" type 5 removable SCSI 2
cd0(ncr0:2:0): CD-ROM
cd0(ncr0:2:0): asynchronous.
cd present [326402 x 2048 byte records]
(ncr0:2:2): asynchronous.
(ncr0:2:3): asynchronous.
(ncr0:2:4): asynchronous.
(ncr0:2:5): asynchronous.
(ncr0:2:6): asynchronous.
(ncr0:2:7): asynchronous.
vga0 <VGA-compatible display device> rev 1 on pci0:6
Probing for devices on the ISA bus:
scprobe: keyboard RESET failed (result = 0xfa)
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2 at 0x3e8-0x3ef irq 5 on isa
sio2: type 16550A
sio3: disabled, not probed.
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
lpt1 at 0x278-0x27f on isa
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
npx0 on motherboard
npx0: INT 16 interface
new masks: bio c0000840, tty c00300ba, net c00300ba
IP firewall initialized
WARNING: / was not properly dismounted.
cd0(ncr0:2:0): asynchronous.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSI.3.93.960525090335.236A-100000>