Date: Sat, 17 Feb 2007 20:31:42 +0100 From: "O. Hartmann" <ohartman@mail.zedat.fu-berlin.de> To: Konstantin Dimitrov <kosio.dimitrov@gmail.com> Cc: freebsd-multimedia@freebsd.org, "Mr. Darren" <darren780@yahoo.com>, freebsd-current@freebsd.org Subject: Re: envy24ht: M-Audio Revolution 5.1 broken (FreeBSD 7.0-CURRENT/AMD64) Message-ID: <45D7581E.8080103@mail.zedat.fu-berlin.de> In-Reply-To: <8103ad500702171111k277aecddj99e261a11676b952@mail.gmail.com> References: <741011.28358.qm@web34714.mail.mud.yahoo.com> <45D6FD02.8090208@mail.zedat.fu-berlin.de> <8103ad500702170825y38b76fd9u7ac23ab64bd4cb4a@mail.gmail.com> <45D744FD.1040504@mail.zedat.fu-berlin.de> <8103ad500702171111k277aecddj99e261a11676b952@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Konstantin Dimitrov wrote: > you can't change the volume at all and no matter what value you use, > e.g. 0, 50, 100, always the same very silent sound going out or when > use 0 you can mute the sound, when you use 100 the sound is very > silent, but not as much silent as when you use 50 ? > > On 2/17/07, O. Hartmann <ohartman@mail.zedat.fu-berlin.de> wrote: >> Konstantin Dimitrov wrote: >> > Oliver, seems like the init data for Revo 5.1 are wrong, that is why >> > the sound is badly distorted, until now i haven't had access to Revo >> > 5.1 hardware for tests, so it's somehow expected problem, but with >> > several trials and errors we should be able to find the right init >> > data, so get the first slightly modified version from here: >> > >> > http://envy24.svobodno.com/driver/envy24ht/current/envy24ht.c >> > >> > rebuild and report back the result ... >> > >> > On 2/17/07, O. Hartmann <ohartman@mail.zedat.fu-berlin.de> wrote: >> >> Mr. Darren wrote: >> >> > Does anyone have this working at the moment? I can't >> >> > seem to play any audio. Can't open /dev/dsp0.0! and >> >> > so forth. >> >> > -Darren >> >> > %uname -a >> >> > FreeBSD DARREN 7.0-CURRENT FreeBSD 7.0-CURRENT #0: Fri >> >> > Feb 16 22:40:32 UTC 2007 >> >> > root@DARREN:/usr/obj/usr/src/sys/DARREN amd64 >> >> > >> >> > FreeBSD Audio Driver (newpcm: 64bit) >> >> > Installed devices: >> >> > pcm0: <Envy24 audio (M Audio Audiophile 2496)> at io >> >> > 0x9800:32,0x9400:16,0x9000:16,0x8c00:64 irq 18 >> >> > (5p/3r/1v channels duplex default) >> >> > %ls /dev/dsp* >> >> > /dev/dsp0.0 /dev/dsp0.5 /dev/dsp0.p1 /dev/dsp0.r1 >> >> > /dev/dspW0.2 /dev/dspW0.7 >> >> > /dev/dsp0.1 /dev/dsp0.6 /dev/dsp0.p2 /dev/dsp0.r2 >> >> > /dev/dspW0.3 /dev/dspW0.8 >> >> > /dev/dsp0.2 /dev/dsp0.7 /dev/dsp0.p3 /dev/dsp0.v0 >> >> > /dev/dspW0.4 >> >> > /dev/dsp0.3 /dev/dsp0.8 /dev/dsp0.p4 /dev/dspW0.0 >> >> > /dev/dspW0.5 >> >> > /dev/dsp0.4 /dev/dsp0.p0 /dev/dsp0.r0 /dev/dspW0.1 >> >> > /dev/dspW0.6 >> >> > %ls /dev/audio* >> >> > /dev/audio0.0 /dev/audio0.2 /dev/audio0.4 >> >> > /dev/audio0.6 /dev/audio0.8 >> >> > /dev/audio0.1 /dev/audio0.3 /dev/audio0.5 >> >> > /dev/audio0.7 >> >> > % >> >> > >> >> > >> >> > >> >> > >> >> >> >> Just half an hour ago I got my new M-Audio Revolution 5.1: >> >> >> >> pcm0: <Envy24GT audio (M-Audio Revolution 5.1)> port >> >> 0xec00-0xec1f,0xe880-0xe8ff >> >> irq 18 at device 8.0 on pci4 >> >> pcm0: [GIANT-LOCKED] >> >> pcm0: system configuration >> >> SubVendorID: 0x1412, SubDeviceID: 0x3631 >> >> XIN2 Clock Source: 49.152MHz(192kHz*256) >> >> MPU-401 UART(s) #: not implemented >> >> ADC #: 1 >> >> DAC #: 3 >> >> Multi-track converter type: I2S(with volume, 192KHz support, 24bit >> >> resolution, >> >> ID#0x0) >> >> S/PDIF(IN/OUT): 0/1 ID# 0x00 >> >> GPIO(mask/dir/state): 0x3fff85/0x4000fa/0x72 >> >> >> >> >> >> Box is based on ASUS A8N32-SLI, AMD64 running FreeBSD >> 7.0-CURRENT/AMD64 >> >> (no 32Bit compatibility), SCHED_ULE, PREEMPTION, driver snd_envy24ht >> >> hardwired into the kernel. >> >> I'm able to start sound playing via VLC or mplayer and I can hear >> >> something that sounds like the music I expected to hear but it is >> highly >> >> distorted and scrambled. >> >> After a while sound dies, comes back for a second and then disappear >> >> again ... >> >> >> >> >> >> Regards Oliver >> Hello Konstantin, >> I applied the patch - and it works, half the way. Sound is now playing >> undistorted, but it is very, very silent, I need the amplifier of my >> HiFi rack to amplify the sound input at a very high level. >> Changing volume via 'mixer' command doesn't help: >> >> hartmann: mixer >> Mixer vol is currently set to 100:100 >> Mixer treble is currently set to 0:0 >> Mixer synth is currently set to 0:0 >> Mixer pcm is currently set to 100:100 >> Mixer speaker is currently set to 0:0 >> Mixer line is currently set to 100:100 >> Mixer mic is currently set to 0:0 >> Mixer cd is currently set to 0:0 >> Mixer mix is currently set to 0:0 >> >> >> Every mixer-reachable instance is pumped up to 100%, the others, synth >> for example, aren't configured and return with a notice about that fact: >> >> hartmann: mixer synth 100 >> Setting the mixer synth from 0:0 to 100:100. >> mixer: WRITE_MIXER: Device not configured >> hartmann: mixer vol 100 >> Setting the mixer vol from 100:100 to 100:100. >> hartmann: >> >> >> Well, it is really impressive how fast you answered, thanks. >> >> Regards, >> Oliver >> Konstantin, the volume level is really silent compared to the output level of the onboard AC97 codec or the Creative Audigy SE/LS (with OSS driver, not working anymore in FreeBSD 7.0-CURRENT). My amplification facility of the HiFi equipment is set to half full amplification and normally this would blast my neighbour's ears ;-) But with the M-Audio Revo 5.1 it is just 'silent', just for smooth listening. It is definitely too silent. I can mute with 0 and half the volume by setting mixer/pcm/volume level to 50 or yield another percentage setting any value 0 < X <= 100, X for volume/percentage. I use the green outlet for my HiFi facility. If you expect me test anything for you, let me know. Regards, Oliver
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?45D7581E.8080103>