Date: Wed, 4 Apr 2001 21:54:37 -0400 From: Randall Hopper <aa8vb@nc.rr.com> To: S?ren Schmidt <sos@freebsd.dk> Cc: freebsd-bugs@FreeBSD.ORG Subject: Re: kern/26278: ata driver doesn't support tertiary IDE controller; wd does Message-ID: <20010404215437.A1414@nc.rr.com> In-Reply-To: <200104030650.f336oJ469442@freebsd.dk>; from sos@freebsd.dk on Tue, Apr 03, 2001 at 08:50:19AM %2B0200 References: <200104030020.f330K3w49339@freefall.freebsd.org> <200104030650.f336oJ469442@freebsd.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
--tThc/1wpZn/ma/RB
Content-Type: text/plain; charset=iso-8859-1
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
Søren Schmidt:
|It seems Randall Hopper wrote:
|>
|> Thanks for the reply. I rebuilt with ata, sans flags settings, and I've
|> attached the full dmesg output.
|>
|> I'm sure that nothing else is on IRQ 11. I have it reserved in the BIOS
|> for that card. The BIOS boot-up PCI device listing confirms that no PCI
|> device was assigned IRQ 11, and all the other IRQs (non-PnP ISA) are
|> accounted for (lnc0, sbc0).
|
|Could you please try a verbose boot, that might tell more on why
|the interrupt is lost (or misplaced)..
Ah, I see what you mean (I'd never done that before; had to look it up)
I've attached the output from boot's with both the wd and the ad drivers.
Thanks,
Randall
--
Randall Hopper
aa8vb@nc.rr.com
--tThc/1wpZn/ma/RB
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="boot-v.ad.OUT"
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-RELEASE #16: Wed Apr 4 21:38:47 EDT 2001
rhh@stealth:/usr/src/sys/compile/STEALTH
Calibrating clock(s) ... TSC clock: 399812624 Hz, i8254 clock: 1193197 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 399809516 Hz
CPU: AMD-K6(tm) 3D+ Processor (399.81-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x591 Stepping = 1
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
Data TLB: 128 entries, 2-way associative
Instruction TLB: 64 entries, 1-way associative
L1 data cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative
L1 instruction cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 32 bytes/line, 2 lines/tag, 4-way associative
Write Allocate Enable Limit: 96M bytes
Write Allocate 15-16M bytes: Enable
real memory = 100663296 (98304K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009ffff, 651264 bytes (159 pages)
0x003ed000 - 0x05ff7fff, 96514048 bytes (23563 pages)
avail memory = 93937664 (91736K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f99e0
bios32: Entry = 0xf0400 (c00f0400) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x430
pnpbios: Found PnP BIOS data at 0xc00fcf10
pnpbios: Entry = f0000:cf40 Rev = 1.0
pnpbios: OEM ID cd041
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel" at 0xc03d4000.
VESA: information block
56 45 53 41 00 02 97 6d 00 c0 01 00 00 00 22 00
00 01 00 01 01 01 ac 6d 00 c0 b3 6d 00 c0 bc 6d
00 c0 00 01 01 01 02 01 03 01 05 01 07 01 08 01
09 01 0a 01 0b 01 0c 01 10 01 11 01 12 01 13 01
VESA: 25 mode(s) found
VESA: v2.0, 16384k memory, flags:0x1, mode table:0xc0362f82 (1000022)
VESA: Matrox Graphics Inc.
VESA: Matrox MGA-G200 00
K6-family MTRR support enabled (2 registers)
md0: Malloc disk
Creating DISK md0
pci_open(1): mode 1 addr port (0x0cf8) is 0x80006008
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=12508086)
npx0: <math processor> on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 64855048 bytes/sec
bzero() bandwidth = 89806915 bytes/sec
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=12508086)
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x1250, revid=0x03
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7000, revid=0x01
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7010, revid=0x00
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000e800, size 4
found-> vendor=0x121a, dev=0x0001, revid=0x02
class=04-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base e7000000, size 24
found-> vendor=0x1000, dev=0x0001, revid=0x02
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base 0000e000, size 8
map[14]: type 1, range 32, base e4000000, size 8
found-> vendor=0x109e, dev=0x0350, revid=0x11
class=04-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base e6800000, size 12
found-> vendor=0x102b, dev=0x0520, revid=0x01
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base e5000000, size 24
map[14]: type 1, range 32, base e3800000, size 14
map[18]: type 1, range 32, base e3000000, size 23
pci0: <PCI bus> on pcib0
isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0
I/O Recovery Timing: 8-bit 3.5 clocks, 16-bit 3.5 clocks
Extended BIOS: disabled
Lower BIOS: disabled
Coprocessor IRQ13: enabled
Mouse IRQ12: disabled
Interrupt Routing: A: IRQ10, B: IRQ9, C: IRQ9, D: disabled
MB0: IRQ15, MB1:
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 ATA controller> port 0xe800-0xe80f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xe800
ata0: mask=03 status0=50 status1=50
ata0: mask=03 ostat0=50 ostat2=50
ata0-master: ATAPI probe a=00 b=00
ata0-slave: ATAPI probe a=00 b=00
ata0: mask=03 status0=50 status1=50
ata0-master: ATA probe a=01 b=a5
ata0-slave: ATA probe a=01 b=a5
ata0: devices=03
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xe808
ata1: mask=03 status0=50 status1=00
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI probe a=00 b=00
ata1-slave: ATAPI probe a=14 b=eb
ata1: mask=03 status0=50 status1=00
ata1-master: ATA probe a=01 b=a5
ata1: devices=09
ata1: at 0x170 irq 15 on atapci0
pci0: <3Dfx Voodoo graphics accelerator> (vendor=0x121a, dev=0x0001) at 9.0
ncr0: <ncr 53c810 fast10 scsi> port 0xe000-0xe0ff mem 0xe4000000-0xe40000ff irq 9 at device 10.0 on pci0
ncr0: minsync=25, maxsync=206, maxoffs=8, 16 dwords burst, normal dma fifo
ncr0: single-ended, open drain IRQ driver
bktr0: <BrookTree 848> mem 0xe6800000-0xe6800fff irq 9 at device 11.0 on pci0
using shared irq9.
iicbb0: <I2C generic bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
iicbus: iic devclass not found
smbus0: <System Management Bus> on bti2c0
smbus: smb devclass not found
brooktree0: PCI bus latency is 32.
bktr0: buffer size 3555328, addr 0x5000000
bktr0: GPIO is 0x00fffffb
bktr0: Hauppauge Model 56111 C
bktr0: Hauppauge WinCast/TV, Philips NTSC tuner, dbx stereo.
pci0: <Matrox MGA G200 graphics accelerator> (vendor=0x102b, dev=0x0520) at 12.0 irq 10
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
ata-: ata2 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 06 40 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
ata4: iobase=0x01e8 altiobase=0x03ee bmaddr=0x0000
ata4: mask=03 status0=50 status1=00
ata4: mask=03 ostat0=50 ostat2=00
ata4-master: ATAPI probe a=00 b=00
ata4-slave: ATAPI probe a=00 b=00
ata4: mask=03 status0=50 status1=00
ata4-master: ATA probe a=01 b=a5
ata4: devices=01
ata4 at port 0x1e8-0x1ef,0x3ee irq 11 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fd1: <1200-KB 5.25" drive> on fdc0 drive 1
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2 failed to probe at port 0x3e8 irq 5 on isa0
sio3: configured irq 9 not in bitmap of probed irqs 0
sio3: irq maps: 0x41 0x41 0x41 0x41
sio3: probe failed test(s): 0 1 2 4 6 7 9
sio3 failed to probe at port 0x2e8-0x2ef irq 9 on isa0
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 12 on isa0
lnc0 at port 0x300-0x317 irq 12 drq 7 on isa0
bpf: lnc0 attached
lnc0: PCnet-ISA address 00:00:f4:a9:bc:09
lnc0: driver is using old-style compatability shims
sbc0: <Soundblaster 16> at port 0x220-0x22f irq 5 drq 1 flags 0x15 on isa0
sbc0: setting card to irq 5, drq 1, 5
pcm0: <SB DSP 4.13> on sbc0
pcm: setmap e000, 2000; 0xc6db1000 -> e000
pcm: setmap 10000, 2000; 0xc6db3000 -> 10000
pca0 at port 0x40 on isa0
joy0 at port 0x201 on isa0
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
1:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
2:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to deny, logging limited to 100 packets/entry by default
bpf: ds0 attached
bpf: faith0 attached
bpf: gif0 attached
bpf: gif1 attached
bpf: gif2 attached
bpf: gif3 attached
bpf: lo0 attached
bpf: ppp0 attached
bpf: ppp1 attached
new masks: bio 68c840, tty 6302ba, net 6712ba
bpf: sl0 attached
bpf: sl1 attached
IPsec: Initialized Security Association Processing.
ata4-master: ata_command: timeout waiting for intr
ata4-master: identify failed
ata0-master: success setting WDMA2 on PIIX3 chip
Creating DISK ad0
Creating DISK wd0
ad0: <IBM-DTLA-307045/TX6OA60A> ATA-5 disk at ata0-master
ad0: 32253MB (66055248 sectors), 65531 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, WDMA2
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
ad0: 32253MB <IBM-DTLA-307045> [65531/16/63] at ata0-master WDMA2
ata0-slave: success setting WDMA2 on PIIX3 chip
Creating DISK ad1
Creating DISK wd1
ad1: <IBM-DTTA-350840/T55OA73A> ATA-4 disk at ata0-slave
ad1: 8063MB (16514064 sectors), 16383 cyls, 16 heads, 63 S/T, 512 B/S
ad1: 16 secs/int, 1 depth queue, WDMA2
ad1: piomode=4 dmamode=2 udmamode=2 cblid=0
ad1: 8063MB <IBM-DTTA-350840> [16383/16/63] at ata0-slave WDMA2
ata1-master: success setting WDMA2 on PIIX3 chip
Creating DISK ad2
Creating DISK wd2
ad2: <IBM-DHEA-38451/HP8OA20C> ATA-3 disk at ata1-master
ad2: 8063MB (16514064 sectors), 16383 cyls, 16 heads, 63 S/T, 512 B/S
ad2: 16 secs/int, 1 depth queue, WDMA2
ad2: piomode=4 dmamode=2 udmamode=2 cblid=0
ad2: 8063MB <IBM-DHEA-38451> [16383/16/63] at ata1-master WDMA2
ata1-slave: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-slave: success setting PIO4 on generic chip
acd0: <Pioneer DVD-ROM ATAPIModel DVD-114 0125/E1.25> DVD-ROM drive at ata1 as slave
acd0: 512KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
ncr0: restart (scsi reset).
(probe5:ncr0:0:5:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe5:ncr0:0:5:0): ILLEGAL REQUEST asc:24,0
(probe5:ncr0:0:5:0): Invalid field in CDB
Creating DISK da0
pass0 at ncr0 bus 0 target 5 lun 0
pass0: <IOMEGA ZIP 100 N*32> Removable Direct Access SCSI-2 device
pass0: 3.300MB/s transfers
Mounting root from ufs:/dev/ad0s2a
ad0s1: type 0x6, start 63, end = 2056319, size 2056257 : OK
ad0s2: type 0xa5, start 2056320, end = 35616104, size 33559785 : OK
ad0s3: type 0xf, start 35616105, end = 66043214, size 30427110
ad0s3: C/H/S start 1023/0/1 (16434495) != start 35616105: invalid
(da0:ncr0:0:5:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:ncr0:0:5:0): NOT READY asc:3a,0
(da0:ncr0:0:5:0): Medium not present
da0 at ncr0 bus 0 target 5 lun 0
da0: <IOMEGA ZIP 100 N*32> Removable Direct Access SCSI-2 device
da0: 3.300MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
ad0s5: type 0xb, start 35616168, end = 52404029, size 16787862
ad0s5: C/H/S start 1023/1/1 (16434558) != start 35616168: invalid
ad0<extended>: type 0x5, start 52404030, end = 52805654, size 401625
ad0<extended>: C/H/S start 1023/0/1 (16434495) != start 52404030: invalid
ad0s6: type 0x82, start 52404093, end = 52805654, size 401562
ad0s6: C/H/S start 1023/1/1 (16434558) != start 52404093: invalid
ad0<extended>: type 0x5, start 52805655, end = 66043214, size 13237560
ad0<extended>: C/H/S start 1023/0/1 (16434495) != start 52805655: invalid
ad0s7: type 0x83, start 52805718, end = 66043214, size 13237497
ad0s7: C/H/S start 1023/1/1 (16434558) != start 52805718: invalid
start_init: trying /sbin/init
ad2s1: type 0x6, start 63, end = 2056319, size 2056257 : OK
ad2s2: type 0xa5, start 2056320, end = 2538269, size 481950 : OK
ad2s3: type 0xa5, start 2538270, end = 13012649, size 10474380 : OK
ad2s4: type 0x5, start 13012650, end = 16434494, size 3421845 : OK
ad2s5: type 0x6, start 13012713, end = 16434494, size 3421782 : OK
ad1s1: type 0x6, start 63, end = 1044224, size 1044162 : OK
ad1s2: type 0xa5, start 1044225, end = 1526174, size 481950 : OK
ad1s3: type 0xa5, start 1526175, end = 5719139, size 4192965 : OK
ad1s4: type 0x5, start 5719140, end = 16434494, size 10715355 : OK
ad1s5: type 0x6, start 5719203, end = 6763364, size 1044162 : OK
ad1<extended>: type 0x5, start 6763365, end = 16434494, size 9671130 : OK
ad1s6: type 0xb, start 6763428, end = 16434494, size 9671067 : OK
splash: image decoder found: fire_saver
Linux-ELF exec handler installed
--tThc/1wpZn/ma/RB
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="boot-v.wd.OUT"
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-RELEASE #15: Mon Apr 2 20:26:18 EDT 2001
rhh@stealth:/usr/src/sys/compile/STEALTH
Calibrating clock(s) ... TSC clock: 399814659 Hz, i8254 clock: 1193202 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 399809494 Hz
CPU: AMD-K6(tm) 3D+ Processor (399.81-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x591 Stepping = 1
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
Data TLB: 128 entries, 2-way associative
Instruction TLB: 64 entries, 1-way associative
L1 data cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative
L1 instruction cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 32 bytes/line, 2 lines/tag, 4-way associative
Write Allocate Enable Limit: 96M bytes
Write Allocate 15-16M bytes: Enable
real memory = 100663296 (98304K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009ffff, 651264 bytes (159 pages)
0x003e8000 - 0x05ff7fff, 96534528 bytes (23568 pages)
avail memory = 93958144 (91756K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f99e0
bios32: Entry = 0xf0400 (c00f0400) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x430
pnpbios: Found PnP BIOS data at 0xc00fcf10
pnpbios: Entry = f0000:cf40 Rev = 1.0
pnpbios: OEM ID cd041
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel" at 0xc03cf000.
VESA: information block
56 45 53 41 00 02 97 6d 00 c0 01 00 00 00 22 00
00 01 00 01 01 01 ac 6d 00 c0 b3 6d 00 c0 bc 6d
00 c0 00 01 01 01 02 01 03 01 05 01 07 01 08 01
09 01 0a 01 0b 01 0c 01 10 01 11 01 12 01 13 01
VESA: 25 mode(s) found
VESA: v2.0, 16384k memory, flags:0x1, mode table:0xc035edc2 (1000022)
VESA: Matrox Graphics Inc.
VESA: Matrox MGA-G200 00
K6-family MTRR support enabled (2 registers)
md0: Malloc disk
Creating DISK md0
pci_open(1): mode 1 addr port (0x0cf8) is 0x80006008
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=12508086)
npx0: <math processor> on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 65019505 bytes/sec
bzero() bandwidth = 89847259 bytes/sec
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=12508086)
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x1250, revid=0x03
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7000, revid=0x01
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7010, revid=0x00
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000e800, size 4
found-> vendor=0x121a, dev=0x0001, revid=0x02
class=04-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base e7000000, size 24
found-> vendor=0x1000, dev=0x0001, revid=0x02
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base 0000e000, size 8
map[14]: type 1, range 32, base e4000000, size 8
found-> vendor=0x109e, dev=0x0350, revid=0x11
class=04-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base e6800000, size 12
found-> vendor=0x102b, dev=0x0520, revid=0x01
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base e5000000, size 24
map[14]: type 1, range 32, base e3800000, size 14
map[18]: type 1, range 32, base e3000000, size 23
pci0: <PCI bus> on pcib0
isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0
I/O Recovery Timing: 8-bit 3.5 clocks, 16-bit 3.5 clocks
Extended BIOS: disabled
Lower BIOS: disabled
Coprocessor IRQ13: enabled
Mouse IRQ12: disabled
Interrupt Routing: A: IRQ10, B: IRQ9, C: IRQ9, D: disabled
MB0: IRQ15, MB1:
isa0: <ISA bus> on isab0
ide_pci0: <Intel PIIX3 Bus-master IDE controller> port 0xe800-0xe80f at device 7.1 on pci0
intel_piix_status: primary master sample = 3, master recovery = 1
intel_piix_status: primary master fastDMAonly disabled, pre/post enabled,
intel_piix_status: IORDY sampling enabled,
intel_piix_status: fast PIO enabled
intel_piix_status: primary slave sample = 3, slave recovery = 1
intel_piix_status: primary slave fastDMAonly disabled, pre/post enabled,
intel_piix_status: IORDY sampling enabled,
intel_piix_status: fast PIO enabled
ide_pci: busmaster 0 status: 64 from port: 0000e802
ide_pci: ide0:0 has been configured for DMA by BIOS
ide_pci: ide0:1 has been configured for DMA by BIOS
intel_piix_status: secondary master sample = 3, master recovery = 1
intel_piix_status: secondary master fastDMAonly disabled, pre/post enabled,
intel_piix_status: IORDY sampling enabled,
intel_piix_status: fast PIO enabled
intel_piix_status: secondary slave sample = 3, slave recovery = 1
intel_piix_status: secondary slave fastDMAonly disabled, pre/post enabled,
intel_piix_status: IORDY sampling enabled,
intel_piix_status: fast PIO enabled
ide_pci: busmaster 1 status: 64 from port: 0000e80a
ide_pci: ide1:0 has been configured for DMA by BIOS
ide_pci: ide1:1 has been configured for DMA by BIOS
ide_pci0: driver is using old-style compatability shims
pci0: <3Dfx Voodoo graphics accelerator> (vendor=0x121a, dev=0x0001) at 9.0
ncr0: <ncr 53c810 fast10 scsi> port 0xe000-0xe0ff mem 0xe4000000-0xe40000ff irq 9 at device 10.0 on pci0
ncr0: minsync=25, maxsync=206, maxoffs=8, 16 dwords burst, normal dma fifo
ncr0: single-ended, open drain IRQ driver
bktr0: <BrookTree 848> mem 0xe6800000-0xe6800fff irq 9 at device 11.0 on pci0
using shared irq9.
iicbb0: <I2C generic bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
iicbus: iic devclass not found
smbus0: <System Management Bus> on bti2c0
smbus: smb devclass not found
brooktree0: PCI bus latency is 32.
bktr0: buffer size 3555328, addr 0x5000000
bktr0: GPIO is 0x00fffffb
bktr0: Hauppauge Model 56111 C
bktr0: Hauppauge WinCast/TV, Philips NTSC tuner, dbx stereo.
pci0: <Matrox MGA G200 graphics accelerator> (vendor=0x102b, dev=0x0520) at 12.0 irq 10
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 06 40 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
wdc0 at port 0x1f0-0x1f7 irq 14 flags 0xa0ffa0ff on isa0
wdc0: unit 0 (wd0): <IBM-DTLA-307045>, DMA, 32-bit, multi-block-16
wd0: 32253MB (66055248 sectors), 65531 cyls, 16 heads, 63 S/T, 512 B/S
wd0: ATA INQUIRE valid = 0007, dmamword = 0407, apio = 0003, udma = 003f
wdc0: unit 1 (wd1): <IBM-DTTA-350840>, DMA, 32-bit, multi-block-16
wd1: 8063MB (16514064 sectors), 16383 cyls, 16 heads, 63 S/T, 512 B/S
wd1: ATA INQUIRE valid = 0007, dmamword = 0407, apio = 0003, udma = 0007
wdc0: driver is using old-style compatability shims
wdc1 at port 0x170-0x177 irq 15 flags 0xa0ffa0ff on isa0
wdc1: unit 0 (wd2): <IBM-DHEA-38451>, DMA, 32-bit, multi-block-16
wd2: 8063MB (16514064 sectors), 16383 cyls, 16 heads, 63 S/T, 512 B/S
wd2: ATA INQUIRE valid = 0007, dmamword = 0407, apio = 0003, udma = 0007
wdc1: unit 1 (atapi): <Pioneer DVD-ROM ATAPIModel DVD-114 0125/E1.25>, removable, accel, dma, iordis
wcd0: drive speed 0KB/sec, 512KB cache
wcd0: supported read types: CD-R, CD-RW, CD-DA
wcd0: Audio: play, 256 volume levels
wcd0: Mechanism: ejectable tray
wcd0: Medium: no/blank disc inside, unlocked
wdc1: driver is using old-style compatability shims
wdc2 at port 0x1e8-0x1ef irq 11 flags 0xa0ffa0ff on isa0
wdc2: unit 0 (wd4): <IBM-DTTA-350840>, multi-block-16
wd4: 8063MB (16514064 sectors), 16383 cyls, 16 heads, 63 S/T, 512 B/S
wd4: ATA INQUIRE valid = 0007, dmamword = 0407, apio = 0003, udma = 0007
wdc2: driver is using old-style compatability shims
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fd1: <1200-KB 5.25" drive> on fdc0 drive 1
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: configured irq 5 not in bitmap of probed irqs 0
sio2: irq maps: 0x41 0x41 0x41 0x41
sio2: probe failed test(s): 0 1 2 4 6 7 9
sio2 failed to probe at port 0x3e8-0x3ef irq 5 on isa0
sio3: configured irq 9 not in bitmap of probed irqs 0
sio3: irq maps: 0x41 0x41 0x41 0x41
sio3: probe failed test(s): 0 1 2 4 6 7 9
sio3 failed to probe at port 0x2e8-0x2ef irq 9 on isa0
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 12 on isa0
lnc0 at port 0x300-0x317 irq 12 drq 7 on isa0
bpf: lnc0 attached
lnc0: PCnet-ISA address 00:00:f4:a9:bc:09
lnc0: driver is using old-style compatability shims
sbc0: <Soundblaster 16> at port 0x220-0x22f irq 5 drq 1 flags 0x15 on isa0
sbc0: setting card to irq 5, drq 1, 5
pcm0: <SB DSP 4.13> on sbc0
pcm: setmap e000, 2000; 0xc6db2000 -> e000
pcm: setmap 10000, 2000; 0xc6db4000 -> 10000
pca0 at port 0x40 on isa0
joy0 at port 0x201 on isa0
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
1:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
2:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: ds0 attached
bpf: faith0 attached
bpf: gif0 attached
bpf: gif1 attached
bpf: gif2 attached
bpf: gif3 attached
bpf: lo0 attached
bpf: ppp0 attached
bpf: ppp1 attached
new masks: bio 68c840, tty 6302ba, net 6712ba
bpf: sl0 attached
bpf: sl1 attached
IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to deny, logging limited to 100 packets/entry by default
IPsec: Initialized Security Association Processing.
ncr0: restart (scsi reset).
(probe5:ncr0:0:5:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe5:ncr0:0:5:0): ILLEGAL REQUEST asc:24,0
(probe5:ncr0:0:5:0): Invalid field in CDB
Creating DISK da0
pass0 at ncr0 bus 0 target 5 lun 0
pass0: <IOMEGA ZIP 100 N*32> Removable Direct Access SCSI-2 device
pass0: 3.300MB/s transfers
Mounting root from ufs:/dev/wd0s2a
wd0s1: type 0x6, start 63, end = 2056319, size 2056257 : OK
wd0s2: type 0xa5, start 2056320, end = 35616104, size 33559785 : OK
wd0s3: type 0xf, start 35616105, end = 66043214, size 30427110
wd0s3: C/H/S start 1023/0/1 (16434495) != start 35616105: invalid
(da0:ncr0:0:5:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:ncr0:0:5:0): NOT READY asc:3a,0
(da0:ncr0:0:5:0): Medium not present
da0 at ncr0 bus 0 target 5 lun 0
da0: <IOMEGA ZIP 100 N*32> Removable Direct Access SCSI-2 device
da0: 3.300MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
wd0s5: type 0xb, start 35616168, end = 52404029, size 16787862
wd0s5: C/H/S start 1023/1/1 (16434558) != start 35616168: invalid
wd0<extended>: type 0x5, start 52404030, end = 52805654, size 401625
wd0<extended>: C/H/S start 1023/0/1 (16434495) != start 52404030: invalid
wd0s6: type 0x82, start 52404093, end = 52805654, size 401562
wd0s6: C/H/S start 1023/1/1 (16434558) != start 52404093: invalid
wd0<extended>: type 0x5, start 52805655, end = 66043214, size 13237560
wd0<extended>: C/H/S start 1023/0/1 (16434495) != start 52805655: invalid
wd0s7: type 0x83, start 52805718, end = 66043214, size 13237497
wd0s7: C/H/S start 1023/1/1 (16434558) != start 52805718: invalid
start_init: trying /sbin/init
wd2s1: type 0x6, start 63, end = 2056319, size 2056257 : OK
wd2s2: type 0xa5, start 2056320, end = 2538269, size 481950 : OK
wd2s3: type 0xa5, start 2538270, end = 13012649, size 10474380 : OK
wd2s4: type 0x5, start 13012650, end = 16434494, size 3421845 : OK
wd2s5: type 0x6, start 13012713, end = 16434494, size 3421782 : OK
wd1s1: type 0x6, start 63, end = 1044224, size 1044162 : OK
wd1s2: type 0xa5, start 1044225, end = 1526174, size 481950 : OK
wd1s3: type 0xa5, start 1526175, end = 5719139, size 4192965 : OK
wd1s4: type 0x5, start 5719140, end = 16434494, size 10715355 : OK
wd1s5: type 0x6, start 5719203, end = 6763364, size 1044162 : OK
wd1<extended>: type 0x5, start 6763365, end = 16434494, size 9671130 : OK
wd1s6: type 0xb, start 6763428, end = 16434494, size 9671067 : OK
wd4s1: type 0xa5, start 63, end = 4192964, size 4192902 : OK
wd4s2: type 0x5, start 4192965, end = 16434494, size 12241530 : OK
wd4s5: type 0x6, start 4193028, end = 8385929, size 4192902 : OK
wd4<extended>: type 0x5, start 8385930, end = 12578894, size 4192965 : OK
wd4s6: type 0x6, start 8385993, end = 12578894, size 4192902 : OK
wd4<extended>: type 0x5, start 12578895, end = 16434494, size 3855600 : OK
wd4s7: type 0x6, start 12578958, end = 16434494, size 3855537 : OK
wd4s1: type 0xa5, start 63, end = 4192964, size 4192902 : OK
wd4s2: type 0x5, start 4192965, end = 16434494, size 12241530 : OK
wd4s5: type 0x6, start 4193028, end = 8385929, size 4192902 : OK
wd4<extended>: type 0x5, start 8385930, end = 12578894, size 4192965 : OK
wd4s6: type 0x6, start 8385993, end = 12578894, size 4192902 : OK
wd4<extended>: type 0x5, start 12578895, end = 16434494, size 3855600 : OK
wd4s7: type 0x6, start 12578958, end = 16434494, size 3855537 : OK
splash: image decoder found: fire_saver
Linux-ELF exec handler installed
--tThc/1wpZn/ma/RB--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010404215437.A1414>