Date: Tue, 09 Dec 2014 06:34:09 +0000 From: bugzilla-noreply@freebsd.org To: freebsd-bugs@FreeBSD.org Subject: [Bug 195818] New: [mps] LSI SAS 9211-4i (IT-mode) iuCRC error detected Message-ID: <bug-195818-8@https.bugs.freebsd.org/bugzilla/>
next in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=195818 Bug ID: 195818 Summary: [mps] LSI SAS 9211-4i (IT-mode) iuCRC error detected Product: Base System Version: 10.1-RELEASE Hardware: Any OS: Any Status: New Severity: Affects Some People Priority: --- Component: kern Assignee: freebsd-bugs@FreeBSD.org Reporter: pakhom706@gmail.com I have problem with LSI SAS 9211-4i in IT-mode and SSD KINGSTON SV300S3. To LSI HBA connected two devices: SSD KINGSTON SV300S3 and WD20EARX-00P, WD works fine but KINGSTON have more errors: Dec 8 02:02:42 fido706 kernel: (da1:mps0:0:2:0): READ(10). CDB: 28 00 09 30 5e 71 00 00 07 00 length 3584 SMID 753 terminated ioc 804b scsi 0 state 0 xfer 0 Dec 8 02:02:42 fido706 kernel: (da1:mps0:0:2:0): READ(10). CDB: 28 00 09 30 5e e1 00 00 07 00 length 3584 SMID 757 terminated ioc 804b scsi 0 state 0 xfer 0 Dec 8 02:02:42 fido706 kernel: (da1:mps0:0:2:0): READ(10). CDB: 28 00 09 50 61 0e 00 00 05 00 length 2560 SMID 759 terminated ioc 804b scsi 0 state 0 xfer 0 Dec 8 02:02:42 fido706 kernel: (da1:mps0:0:2:0): READ(10). CDB: 28 00 09 30 5f 0b 00 00 07 00 Dec 8 02:02:42 fido706 kernel: (da1:mps0:0:2:0): CAM status: SCSI Status Error Dec 8 02:02:42 fido706 kernel: (da1:mps0:0:2:0): SCSI status: Check Condition Dec 8 02:02:42 fido706 kernel: (da1:mps0:0:2:0): SCSI sense: ABORTED COMMAND asc:47,3 (Information unit iuCRC error detected) Dec 8 02:02:42 fido706 kernel: (da1:mps0:0:2:0): Retrying command (per sense data) I try to connect KINGSTON SSD to another cable, instead WD but problem still the same. If I connect KINGSTON SSD to onboard sata-2 controller the device work without errors. mps0: <LSI SAS2004> port 0xc000-0xc0ff mem 0xfab3c000-0xfab3ffff,0xfab40000-0xfab7ffff irq 16 at device 0.0 on pci1 mps0: Firmware: 20.00.00.00, Driver: 19.00.00.00-fbsd da0: <ATA WDC WD20EARX-00P AB51> Fixed Direct Access SCSI-6 device da0: Serial Number WD-WMAZA7558670 da0: 600.000MB/s transfers da0: Command Queueing enabled da0: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C) da0: quirks=0x8<4K> da1 at mps0 bus 0 scbus0 target 2 lun 0 da1: <ATA KINGSTON SV300S3 BBF0> Fixed Direct Access SCSI-6 device da1: Serial Number 50026B7745052C5D da1: 600.000MB/s transfers da1: Command Queueing enabled da1: 114473MB (234441648 512 byte sectors: 255H 63S/T 14593C) mps0@pci0:1:0:0: class=0x010700 card=0x30101000 chip=0x00701000 rev=0x02 hdr=0x00 vendor = 'LSI Logic / Symbios Logic' device = 'SAS2004 PCI-Express Fusion-MPT SAS-2 [Spitfire]' class = mass storage subclass = SAS $ uname -r 10.1-RELEASE -- You are receiving this mail because: You are the assignee for the bug.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-195818-8>