Date: Fri, 22 Jul 2005 09:19:44 -0500 From: Bill Harris <harrisb@rcisd.org> To: ticso@cicely.de Cc: freebsd-alpha@freebsd.org Subject: Re: DC driver real slow on 5.4/alpha 4100 Message-ID: <6D9FC808-5A54-4DF1-8A9A-34AC932C146A@rcisd.org> In-Reply-To: <20050721150431.GO67987@cicely12.cicely.de> References: <OF342EB215.0D01F1C6-ON86257043.0061F5B5-86257043.0062CB5C@rcisd.org> <20050719205911.GJ60433@cicely12.cicely.de> <1a6f6c72c4a19a18ffc5c4bd1c1d09c6@rcisd.org> <20050721141858.GN67987@cicely12.cicely.de> <84ad48bef9de0621a6efe8ceba1ee2ce@rcisd.org> <20050721150431.GO67987@cicely12.cicely.de>
next in thread | previous in thread | raw e-mail | index | archive | help
I tried everything in srm to reset the de500. What was interesting, is that when I'd run the net tests, it would bring the card up and online, for just a few seconds. Anyway, after yours and Richard's suggestion, I stuck a Dlink card in, and now I'm running at 100 Full duplex.. Thanks Bill On Jul 21, 2005, at 10:04 AM, Bernd Walter wrote: > On Thu, Jul 21, 2005 at 09:32:36AM -0500, Bill Harris wrote: > >> That was the first thing I tried. I'm afraid somehow I've >> > > Ups - I've overread that you even powered down. > However since this is a DEC card you can also do a lot from SRM. > > >> caused the card to get into a non-functional state. Tried switching >> ports on my switch, unplugging, ifconfig down/up changed from >> 10/100 >> and back. I'm hoping that powering it down and leaving it all day >> without network cable will let it reset. Dunno. >> >> What I'm worried about is those cards are hard to find, and what >> other cards does FBSD support in the Alpha 4100, if this card is >> toast? >> > > Theoretically every card should work. > I've using a fxp(4) based card in AS4100 plus PC164 and xl(4) based > in PC164. > I'm also running a tx(4) based in NoName, but these have broken > support > for autoselect. > Card selection for alpha is only a problem if you want to netboot, > otherwise the same criteria exists as for other platforms. > > >> On Jul 21, 2005, at 9:18 AM, Bernd Walter wrote: >> >> >>> On Thu, Jul 21, 2005 at 09:14:45AM -0500, Bill Harris wrote: >>> >>>> Bernd, >>>> >>>> I have an identical AS4100 at home (my office heater) and had >>>> put 5.4 on it last week. It also shows to be using a dc >>>> driver, the >>>> same DE500 card. >>>> >>>> Well, I think I've screwed my home server up this morning. It's >>>> connected to a Linksys 10/100 switch, and it had been running >>>> fine under 10baseT/half. >>>> >>>> I decided to try and switch it to 100, through a telnet session >>>> (should >>>> have not been a problem) and the card has locked up. I tried >>>> to set >>>> the card (now from the console) to auto-negiotiate, but >>>> nothing. No >>>> lights at all on the card. >>>> >>>> I've unplugged switch, card, power down, rebooted, but my network >>>> card is dead. It still shows succesfully probed in the dmesg, >>>> showing >>>> the mac address and all, but it's interface is DOWN and won't come >>>> back >>>> online or show any LED's. >>>> >>>> Having to leave for work after this fine piece of >>>> experimentation, I >>>> unplugged >>>> everything, turned power off on the server and left. >>>> >>>> Any ideas how I might rescue/reset my card? What are some options? >>>> >>> >>> You might have success with ifconfig down/up. >>> > > -- > B.Walter BWCT http://www.bwct.de > bernd@bwct.de info@bwct.de > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6D9FC808-5A54-4DF1-8A9A-34AC932C146A>