Date: 11 Jul 2001 01:23:13 -0700 From: kidder@dementia.org To: freebsd-stable@freebsd.org Subject: USB problems with 4.3-STABLE (Jul 10) Message-ID: <87hewjkh72.fsf@kanzi.dementia.org>
next in thread | raw e-mail | index | archive | help
I'm having problems with a Logitech iFeel MouseMan USB mouse using
4.3-STABLE (cvsup'ed just this evening, july 10).
Boot behavior sees the mouse get power (evidenced by the glowing
LEDs), boot process pauses with the usb devices for several minutes.
The USB mouse does not successfully control the coursor at any point.
Unplugging and replugging the mouse sees no usable change, though the
mouse's LEDs power up when I reattach the mouse.
I recompiled with some USB debugging options to generate the attached dmesg.
Has anyone seen this behavior before? Any notion what is the culprit?
-brian
----------start dmesg----------
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-STABLE #3: Wed Jul 11 00:46:22 PDT 2001
root@gamer.dementia.org:/usr/obj/usr/src/sys/GAMER
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(tm) Processor (1000.05-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory = 268369920 (262080K bytes)
avail memory = 257658880 (251620K bytes)
Preloaded elf kernel "kernel" at 0xc039a000.
Pentium Pro MTRR support enabled
md0: Malloc disk
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <PCI to PCI bridge (vendor=1106 device=8305)> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <NVidia GeForce2 GTS graphics accelerator> at 0.0 irq 10
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xd000-0xd00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 11 at device 7.2 on pci0
uhci_run: setting run=0
uhci_run: done cmd=0x0 sts=0x20
uhci_run: setting run=1
uhci_run: done cmd=0x81 sts=0x0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci_waitintr: timeout
uhci_idone: error, addr=2, endpt=0x00, status 0x500000<BABBLE,STALLED>
uhci_waitintr: timeout
usbd_transfer_cb: short transfer 0<1
uhci_waitintr: timeout
usbd_transfer_cb: short transfer 0<1
ums0: Logitech, Inc. product 0xc032, rev 1.00/1.01, addr 2, iclass 3/1
uhci_waitintr: timeout
usbd_transfer_cb: short transfer 0<74
device_probe_and_attach: ums0 attach returned 6
uhci_waitintr: timeout
usbd_transfer_cb: short transfer 0<1
uhci_waitintr: timeout
usbd_transfer_cb: short transfer 0<1
ugen0: Logitech, Inc. product 0xc032, rev 1.00/1.01, addr 2
uhci_waitintr: timeout
usbd_transfer_cb: short transfer 0<9
ugen0: setting configuration index 0 failed
device_probe_and_attach: ugen0 attach returned 6
uhci_waitintr: timeout
usbd_transfer_cb: short transfer 0<1
uhci_waitintr: timeout
usbd_transfer_cb: short transfer 0<1
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 11 at device 7.3 on pci0
uhci_run: setting run=0
uhci_run: done cmd=0x0 sts=0x20
uhci_run: setting run=1
uhci_run: done cmd=0x81 sts=0x0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcm0: <Creative EMU10K1> port 0xdc00-0xdc1f irq 5 at device 9.0 on pci0
dc0: <82c169 PNIC 10/100BaseTX> port 0xe400-0xe4ff mem 0xdf000000-0xdf0000ff irq 11 at device 11.0 on pci0
dc0: Ethernet address: 00:c0:f0:48:0d:9e
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
orm0: <Option ROM> at iomem 0xc0000-0xc97ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 14324MB <QUANTUM FIREBALLlct10 15> [29104/16/63] at ata0-master UDMA66
ad1: 8223MB <ST38422A> [16708/16/63] at ata0-slave UDMA66
acd0: CD-RW <PLEXTOR CD-R PX-W1210A> at ata1-master using PIO4
Mounting root from ufs:/dev/ad1s1a
/dev/vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-570 $
/dev/vmmon: Module vmmon: initialized
dc0: promiscuous mode enabled
vmnet1: promiscuous mode enabled
<comment: mouse disconnected from port 2, reattached to port 2>
uhci_timeout: ii=0xc0d6cba0
uhci_timeout: ii=0xc0d6cba0
uhci_timeout: ii=0xc0d6cba0
usbd_new_device: addr=2, getting first desc failed
uhub_explore: usb_new_device failed, error=TIMEOUT
uhub0: device problem, disabling port 2
<comment: mouse moved to port 1>
uhub0: port error, restarting port 2
uhci_timeout: ii=0xc0d6cba0
uhci_timeout: ii=0xc0d6cba0
uhci_timeout: ii=0xc0d6cba0
usbd_new_device: addr=2, getting first desc failed
uhub_explore: usb_new_device failed, error=TIMEOUT
uhub0: device problem, disabling port 1
<comment: mouse moved back to port 2>
uhci_timeout: ii=0xc0d6cba0
uhci_timeout: ii=0xc0d6cba0
uhci_timeout: ii=0xc0d6cba0
usbd_new_device: addr=2, getting first desc failed
uhub_explore: usb_new_device failed, error=TIMEOUT
uhub0: device problem, disabling port 2
<comment: mouse moved back to port 1>
uhub0: port error, restarting port 2
uhci_timeout: ii=0xc0d6cba0
uhci_timeout: ii=0xc0d6cba0
uhci_timeout: ii=0xc0d6cba0
usbd_new_device: addr=2, getting first desc failed
uhub_explore: usb_new_device failed, error=TIMEOUT
uhub0: device problem, disabling port 1
-----------end dmesg-----------
The kernel was compiled with the following USB-related options:
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
#device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
device uscanner # Scanners
# USB Ethernet, requires mii
#device aue # ADMtek USB ethernet
#device cue # CATC USB ethernet
#device kue # Kawasaki LSI USB ethernet
# debugging options for the USB subsystem
#
options UHCI_DEBUG
options OHCI_DEBUG
options USB_DEBUG
options UGEN_DEBUG
options UHID_DEBUG
options UHUB_DEBUG
options UKBD_DEBUG
options ULPT_DEBUG
options UMASS_DEBUG
options UMS_DEBUG
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?87hewjkh72.fsf>