Date: Fri, 24 Apr 1998 01:00:03 -0500 From: child <child@AusChat.org> To: freebsd-mobile@FreeBSD.ORG Subject: PC-Card:Resource allocation failure Message-ID: <3.0.3.32.19980424010003.00b80f9c@192.168.0.10>
index | next in thread | raw e-mail
HI!
can anyone shed some light on this error
i'm trying to use an NE2000 compat PCMCIA card on 2.2.5-REL
Thankyou Kindly
Jeremy Samual Sommer
when running pccardd I get this
pccardd[2001]: Resource allocation failure for PCMCIA
#pccard.conf
card "PCMCIA" "Ethernet Card"
config 0x1 "ed0" ?
insert echo Pine Ether inserted
insert /etc/pccard_ether ed0 -link0 link1
remove echo Pine Ether removed
remove /sbin/ifconfig ed0 delete
io 0x240-0x360
irq 4
and a dumpcis.....
Configuration data for card in slot 1
Tuple #1, code = 0x1 (Common memory descriptor), length = 3
000: dc 00 ff
Common memory device information:
Device number 1, type Function specific, WPS = ON
Speed = 100nS, Memory block size = 512b, 1 units
Tuple #2, code = 0x17 (Attribute memory descriptor), length = 3
000: 49 00 ff
Attribute memory device information:
Device number 1, type EEPROM, WPS = ON
Speed = 250nS, Memory block size = 512b, 1 units
Tuple #3, code = 0x21 (Functional ID), length = 2
000: 06 03
Network/LAN adapter - POST initialize - Card has ROM
Tuple #4, code = 0x15 (Version 1 info), length = 27
000: 04 01 50 43 4d 43 49 41 00 45 74 68 65 72 6e 65
010: 74 20 43 61 72 64 00 00 00 00 ff
Version = 4.1, Manuf = [PCMCIA],card vers = [Ethernet Card]
Addit. info = [],[]
Tuple #5, code = 0x13 (Link target), length = 3
000: 43 49 53
Tuple #6, code = 0x1a (Configuration map), length = 5
000: 01 24 f8 03 03
Reg len = 2, config register addr = 0x3f8, last config = 0x24
Registers: XX------
Tuple #7, code = 0x1b (Configuration entry), length = 17
000: e0 81 1d 3f 55 4d 5d 06 86 46 26 fc 24 65 30 ff
010: ff
Config index = 0x20(default)
Interface byte = 0x81 (I/O) wait signal supported
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Minimum operating supply voltage: 4.5 x 1V
Maximum operating supply voltage: 5.5 x 1V
Continuous supply current: 1 x 100mA
Max current average over 1 second: 1 x 100mA, ext = 0x46
Max current average over 10 ms: 2 x 100mA
Wait scale Speed = 1.5 x 10 us
Card decodes 4 address lines, 8 Bit I/O only
IRQ modes: Level
IRQ level = 4
Tuple #8, code = 0x1b (Configuration entry), length = 7
000: 20 08 ca 60 00 03 1f
Config index = 0x20
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x300 block length = 0x20
Tuple #9, code = 0x1b (Configuration entry), length = 7
000: 21 08 ca 60 20 03 1f
Config index = 0x21
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x320 block length = 0x20
Tuple #10, code = 0x1b (Configuration entry), length = 7
000: 22 08 ca 60 40 03 1f
Config index = 0x22
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x340 block length = 0x20
Tuple #11, code = 0x1b (Configuration entry), length = 7
000: 23 08 ca 60 60 03 1f
Config index = 0x23
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x360 block length = 0x20
Tuple #12, code = 0x20 (Manufacturer ID), length = 4
000: 01 8a 00 01
PCMCIA ID = 0x8a01, OEM ID = 0x100
Tuple #13, code = 0x14 (No link), length = 0
Tuple #14, code = 0xff (Terminator), length = 0
2 slots found
Time to heal....Time to recover...Time to Move on..Time to live life.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
home |
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3.0.3.32.19980424010003.00b80f9c>