Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 15 Dec 2007 14:15:25 +0100
From:      Andrea Franceschini <andrea.franceschini@postecom.it>
To:        Pete French <petefrench@ticketswitch.com>
Cc:        freebsd-stable@freebsd.org
Subject:   Re: atapicam fails after upgrade to 6.3
Message-ID:  <20071215131525.GA24209@postecom.it>
In-Reply-To: <E1J3WYf-000HEP-8A@dilbert.ticketswitch.com>
References:  <20071215093729.GA23470@postecom.it> <E1J3WYf-000HEP-8A@dilbert.ticketswitch.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, Dec 15, 2007 at 12:55:57PM +0000, Pete French wrote:
> > 	1) when I use acd0 directly it seems to work..
> > 	2) when I load atapicam module i got this messages:
> >
> > Dec 13 23:25:59 moondust kernel: acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
> > Dec 13 23:25:59 moondust kernel: acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
> 
> I get those whenever I boot my machine - but it doesn't seem to affect
> the operation.
> 
> > 	When I try to burn a dvd trough atapicam i got this messsages:
> >
> > Dec 15 01:38:54 moondust kernel: acd0: FAILURE - READ_TOC ILLEGAL REQUEST asc=0x24 ascq=0x00 
> > Dec 15 01:39:27 moondust kernel: acd0: FAILURE - SEND_OPC_INFO HARDWARE ERROR asc=0x09 ascq=0x00 
> > Dec 15 01:40:27 moondust kernel: acd0: FAILURE - WRITE_BIG timed out
> > Dec 15 01:40:39 moondust kernel: acd0: FAILURE - REQUEST_SENSE timed out
> > Dec 15 01:40:49 moondust kernel: acd0: FAILURE - REQUEST_SENSE timed out
> 
> I also get these - but actually if you leave it, eventually it sorts itself out
> and writes the DVD fine. Try leaving it a while and it should work.
> 
> -pete.
Hi Pete,

	thanks for your answer.

	Unfortunately growisofs fails to write the DVD and the DVD burner itself
	get stuck in endlessy retrying...

	This is what I got when i try to burn a DVD:

  0.67% done, estimate finish Sat Dec 15 15:10:31 2007
:-[ PERFORM OPC failed with SK=4h/ASC=09h/ACQ=00h]: Input/output error
/dev/pass1: "Current Write Speed" is 4.1x1352KBps.
:-[ WRITE@LBA=0h failed with SK=3h/ASC=0Ch/ACQ=00h]: Input/output error
:-( write failed: Input/output error

	Following and advice in this mailing list I tried reverting to
	1.42.2.2 , it stops giving the "INQUIRY ILLEGAL REQUEST" error
	but still burning doesn't work.

Any further idea?

Thanks.



----------------------------------------------------------------------------
"La presente comunicazione elettronica contiene informazioni aziendali non
private. Eventuali risposte alla presente potrebbero essere conosciute, per
motivi organizzativi e di sicurezza, dal personale di Postecom S.p.a."



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20071215131525.GA24209>