Date: Sun, 17 Jan 2010 17:31:53 +0000 (UTC) From: Christian Brueffer <brueffer@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-stable@freebsd.org, svn-src-stable-8@freebsd.org Subject: svn commit: r202493 - in stable/8: share/man/man4 usr.sbin/faithd Message-ID: <201001171731.o0HHVrbg094431@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: brueffer Date: Sun Jan 17 17:31:53 2010 New Revision: 202493 URL: http://svn.freebsd.org/changeset/base/202493 Log: MFC: r201870, r201889 Various language fixes. Also fixed the URL to totd, obtained from NetBSD. Modified: stable/8/share/man/man4/faith.4 stable/8/usr.sbin/faithd/faithd.8 Directory Properties: stable/8/share/man/man4/ (props changed) stable/8/share/man/man4/de.4 (props changed) stable/8/usr.sbin/faithd/ (props changed) Modified: stable/8/share/man/man4/faith.4 ============================================================================== --- stable/8/share/man/man4/faith.4 Sun Jan 17 17:10:17 2010 (r202492) +++ stable/8/share/man/man4/faith.4 Sun Jan 17 17:31:53 2010 (r202493) @@ -58,15 +58,15 @@ variable in .Xr rc.conf 5 . .Pp Special action will be taken when IPv6 TCP traffic is seen on a router, -and routing table suggests to route it to +and the routing table suggests to route it to the .Nm interface. In this case, the packet will be accepted by the router, -regardless of list of IPv6 interface addresses assigned to the router. -The packet will be captured by an IPv6 TCP socket, if it has +regardless of the list of IPv6 interface addresses assigned to the router. +The packet will be captured by an IPv6 TCP socket, if it has the .Dv IN6P_FAITH -flag turned on and it has matching address/port pairs. -In result, +flag turned on and matching address/port pairs. +As a result, .Nm will let you capture IPv6 TCP traffic to some specific destination addresses. Userland programs, such as @@ -79,43 +79,42 @@ and perform application-specific address .Pp The .Dv IN6P_FAITH -flag on IPv6 TCP socket can be set by using +flag on a IPv6 TCP socket can be set by using .Xr setsockopt 2 , -with level equals to +with level .Dv IPPROTO_IPV6 -and optname equals to +and optname .Dv IPv6_FAITH . .Pp -To handle error reports by ICMPv6, some of ICMPv6 packets routed to +To handle error reports by ICMPv6, some ICMPv6 packets routed to an .Nm interface will be delivered to IPv6 TCP, as well. .Pp To understand how .Nm -can be used, take a look at source code of +can be used, take a look at the source code of .Xr faithd 8 . .Pp -As +As the .Nm -interface implements potentially dangerous operation, -great care must be taken when configuring -.Nm -interface. -To avoid possible misuse, +interface implements potentially dangerous operations, +great care must be taken when configuring it. +To avoid possible misuse, the .Xr sysctl 8 variable .Li net.inet6.ip6.keepfaith must be set to .Li 1 -prior to the use of the interface. +prior to using the interface. When .Li net.inet6.ip6.keepfaith is .Li 0 , -no packet will be captured by +no packets will be captured by the .Nm interface. .Pp +The .Nm interface is intended to be used on routers, not on hosts. .\" @@ -130,5 +129,5 @@ interface is intended to be used on rout .%O RFC3142 .Re .Sh HISTORY -The FAITH IPv6-to-IPv4 TCP relay translator was first appeared in +The FAITH IPv6-to-IPv4 TCP relay translator first appeared in the WIDE hydrangea IPv6 stack. Modified: stable/8/usr.sbin/faithd/faithd.8 ============================================================================== --- stable/8/usr.sbin/faithd/faithd.8 Sun Jan 17 17:10:17 2010 (r202492) +++ stable/8/usr.sbin/faithd/faithd.8 Sun Jan 17 17:31:53 2010 (r202493) @@ -29,7 +29,7 @@ .\" .\" $FreeBSD$ .\" -.Dd May 17, 1998 +.Dd January 9, 2010 .Dt FAITHD 8 .Os .Sh NAME @@ -44,20 +44,18 @@ .Sh DESCRIPTION The .Nm -utility provides IPv6-to-IPv4 TCP relay. -It must be used on an IPv4/v6 dual stack router. +utility provides IPv6-to-IPv4 TCP relaying. +It can only be used on an IPv4/v6 dual stack router. .Pp When .Nm receives .Tn TCPv6 -traffic, -.Nm -will relay the +traffic, it will relay the .Tn TCPv6 traffic to .Tn TCPv4 . -Destination for relayed +The destination for the relayed .Tn TCPv4 connection will be determined by the last 4 octets of the original .Tn IPv6 @@ -73,14 +71,14 @@ destination address is the traffic will be relayed to IPv4 destination .Li 10.1.1.1 . .Pp -To use +To use the .Nm translation service, an IPv6 address prefix must be reserved for mapping IPv4 addresses into. -Kernel must be properly configured to route all the TCP connection +The kernel must be properly configured to route all the TCP connections toward the reserved IPv6 address prefix into the .Xr faith 4 -pseudo interface, by using +pseudo interface, using the .Xr route 8 command. Also, @@ -91,7 +89,7 @@ to .Dv 1 . .Pp The router must be configured to capture all the TCP traffic -toward reserved +for the reserved .Tn IPv6 address prefix, by using .Xr route 8 @@ -101,21 +99,20 @@ commands. .Pp The .Nm -utility needs a special name-to-address translation logic, so that -hostnames gets resolved into special +utility needs special name-to-address translation logic, so that +hostnames get resolved into the special .Tn IPv6 address prefix. -For small-scale installation, use -.Xr hosts 5 . -For large-scale installation, it is useful to have +For small-scale installations, use +.Xr hosts 5 ; +For large-scale installations, it is useful to have a DNS server with special address translation support. An implementation called .Nm totd -is available -at -.Pa http://www.vermicelli.pasta.cs.uit.no/ipv6/software.html . -Make sure you do not propagate translated DNS records to normal DNS cloud, -it is highly harmful. +is available at +.Pa http://www.vermicelli.pasta.cs.uit.no/software/totd.html . +Make sure you do not propagate translated DNS records over to normal +DNS, as it can cause severe problems. .Ss Daemon mode When .Nm @@ -150,9 +147,9 @@ to you can run local daemons on the router. The .Nm -utility will invoke local daemon at +utility will invoke a local daemon at .Ar serverpath -if the destination address is local interface address, +if the destination address is a local interface address, and will perform translation to IPv4 TCP in other cases. You can also specify .Ar serverargs @@ -182,7 +179,7 @@ The .Nm utility includes special support for protocols used by .Xr ftp 1 . -When translating FTP protocol, +When translating the FTP protocol, .Nm translates network level addresses in .Li PORT/LPRT/EPRT @@ -191,8 +188,8 @@ and commands. .Pp Inactive sessions will be disconnected in 30 minutes, -to avoid stale sessions from chewing up resources. -This may be inappropriate for some of the services +to prevent stale sessions from chewing up resources. +This may be inappropriate for some services (should this be configurable?). .Ss inetd mode When @@ -200,13 +197,13 @@ When is invoked via .Xr inetd 8 , .Nm -will handle connection passed from standard input. +will handle connections passed from standard input. If the connection endpoint is in the reserved IPv6 address prefix, .Nm will relay the connection. Otherwise, .Nm -will invoke service-specific daemon like +will invoke a service-specific daemon like .Xr telnetd 8 , by using the command argument passed from .Xr inetd 8 . @@ -219,16 +216,16 @@ For example, if .Nm is invoked via .Xr inetd 8 -on FTP port, it will operate as a FTP relay. +on the FTP port, it will operate as an FTP relay. .Pp The operation mode requires special support for .Nm in .Xr inetd 8 . .Ss Access control -To prevent malicious accesses, +To prevent malicious access, .Nm -implements a simple address-based access control. +implements simple address-based access control. With .Pa /etc/faithd.conf (or @@ -239,7 +236,7 @@ specified by will avoid relaying unwanted traffic. The .Pa faithd.conf -contains directives with the following format: +configuration file contains directives of the following format: .Bl -bullet .It .Ar src Ns / Ns Ar slen Cm deny Ar dst Ns / Ns Ar dlen @@ -281,6 +278,7 @@ on error. .Sh EXAMPLES Before invoking .Nm , +the .Xr faith 4 interface has to be configured properly. .Bd -literal -offset @@ -334,12 +332,12 @@ ssh stream tcp6/faith nowait root .Ed .Pp .Xr inetd 8 -will open listening sockets with enabling kernel TCP relay support. -Whenever connection comes in, +will open listening sockets with kernel TCP relay support enabled. +Whenever a connection comes in, .Nm will be invoked by .Xr inetd 8 . -If it the connection endpoint is in the reserved IPv6 address prefix. +If the connection endpoint is in the reserved IPv6 address prefix. The .Nm utility will relay the connection. @@ -377,12 +375,12 @@ setting. .Sh HISTORY The .Nm -utility first appeared in WIDE Hydrangea IPv6 protocol stack kit. +utility first appeared in the WIDE Hydrangea IPv6 protocol stack kit. .\" .Pp IPv6 and IPsec support based on the KAME Project (http://www.kame.net/) stack was initially integrated into -.Fx 4.0 +.Fx 4.0 . .Sh SECURITY CONSIDERATIONS It is very insecure to use IP-address based authentication, for connections relayed by .Nm , @@ -392,16 +390,15 @@ Administrators are advised to limit acce .Nm using .Pa faithd.conf , -or by using IPv6 packet filters. -It is to protect +or by using IPv6 packet filters, to protect the .Nm -service from malicious parties and avoid theft of service/bandwidth. -IPv6 destination address can be limited by -carefully configuring routing entries that points to +service from malicious parties, and to avoid theft of service/bandwidth. +IPv6 destination addresses can be limited by +carefully configuring routing entries that point to .Xr faith 4 , using .Xr route 8 . -IPv6 source address needs to be filtered by using packet filters. -Documents listed in +The IPv6 source address needs to be filtered using packet filters. +The documents listed in .Sx SEE ALSO -have more discussions on this topic. +have more information on this topic.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201001171731.o0HHVrbg094431>