Date: Wed, 22 Mar 2006 14:43:46 -0800 From: Maksym Sobolyev <msobolyev@digifonica.com> To: phk@freebsd.org Cc: "current@freebsd.org" <current@freebsd.org> Subject: timecounting with TSC doesn't work properly on my notebook Message-ID: <4421D322.3010901@digifonica.com>
next in thread | raw e-mail | index | archive | help
Hi,
After updating to the recent current (previous one was circa end-2005) I
have found that time on machine goes by 3-4 times faster than wallclock
with TSC timecounter. Selecting ACPI-safe instead helps.
$ sysctl -a | grep timeco
kern.timecounter.stepwarnings: 0
kern.timecounter.nbinuptime: 23605635
kern.timecounter.nnanouptime: 0
kern.timecounter.nmicrouptime: 2507479
kern.timecounter.nbintime: 5702952
kern.timecounter.nnanotime: 17926
kern.timecounter.nmicrotime: 5685024
kern.timecounter.ngetbinuptime: 997735
kern.timecounter.ngetnanouptime: 3704
kern.timecounter.ngetmicrouptime: 7930898
kern.timecounter.ngetbintime: 0
kern.timecounter.ngetnanotime: 36
kern.timecounter.ngetmicrotime: 15325858
kern.timecounter.nsetclock: 3
kern.timecounter.hardware: ACPI-safe
kern.timecounter.choice: TSC(800) ACPI-safe(1000) i8254(0) dummy(-1000000)
kern.timecounter.tick: 1
I have used TSC since it works better with VmWare (I dual boot this
system - both on real hardware and in vmware).
Is it something we can fix?
-Maxim
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 7.0-CURRENT #23: Mon Mar 27 08:42:26 PST 2006
root@notebook:/usr/src/sys/i386/compile/NOTEBOOK
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 Mobile CPU 2.00GHz (450.77-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 1072627712 (1022 MB)
avail memory = 1041293312 (993 MB)
kbd1 at kbdmux0
acpi0: <PTLTD RSDT> on motherboard
acpi0: Power Button (fixed)
acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0xf0cb-0xf0cd on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Ali M1671 host to AGP bridge> on hostb0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem
0xe9000000-0xe9ffffff,0xec000000-0xefffffff,0xea000000-0xea07ffff irq 9
at device 0.0 on pci1
pci0: <multimedia, audio> at device 6.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <simple comms, generic modem> at device 8.0 (no driver attached)
wi0: <Intersil Prism2.5> mem 0xe8008000-0xe8008fff at device 9.0 on pci0
wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)
wi0: Intersil Firmware: Primary (1.1.0), Station (1.4.9)
wi0: Ethernet address: 00:d0:59:44:5a:f6
cbb0: <TI1410 PCI-CardBus Bridge> at device 10.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
uhci0: <VIA 83C572 USB controller> port 0x1800-0x181f irq 11 at device
11.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0x1820-0x183f irq 10 at device
11.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xe8002000-0xe80020ff at
device 11.2 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 0.95
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <VIA VT6202 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
umass0: <Myson Century, Inc. USB Mass Storage Device, class 0/0, rev
2.00/b0.07, addr 2> on uhub2
fwohci0: <Texas Instruments TSB43AB22/A> mem
0xe8002800-0xe8002fff,0xe8004000-0xe8007fff at device 12.0 on pci0
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:c0:9f:00:00:05:4f:27
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:c0:9f:05:4f:27
fwe0: Ethernet address: 02:c0:9f:05:4f:27
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
atapci0: <AcerLabs M5229 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1840-0x184f at device 16.0 on pci0
atapci0: using PIO transfers above 137GB as workaround for 48bit DMA
access bug, expect reduced performance
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <bridge> at device 17.0 (no driver attached)
sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0x1c00-0x1cff mem
0xe8003000-0xe8003fff irq 5 at device 18.0 on pci0
sis0: Silicon Revision: DP83815D
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: Ethernet address: 00:c0:9f:15:82:88
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xcf7ff,0xd4000-0xd47ff,0xdf000-0xdffff,0xe0000-0xe3fff pnpid
ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FAST]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uhub3: <Mitsumi Electric Hub in Apple Extended USB Keyboard, class 9/0,
rev 1.10/4.10, addr 2> on uhub0
uhub3: 3 ports with 2 removable, bus powered
ukbd0: <Mitsumi Electric Apple Extended USB Keyboard, class 0/0, rev
1.10/4.10, addr 3> on uhub3
kbd2 at ukbd0
uhid0: <Mitsumi Electric Apple Extended USB Keyboard, class 0/0, rev
1.10/4.10, addr 3> on uhub3
Timecounter "TSC" frequency 450774884 Hz quality 800
Timecounters tick every 100.000 msec
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding
enabled, default to accept, logging disabled
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ad0: 57231MB <IC25N060ATMR04 0 MO3OAD0A> at ata0-master UDMA100
acd0: CDRW <MATSHITACD-RW CW-8121/AZ20> at ata1-master PIO4
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4421D322.3010901>