Date: Tue, 24 Oct 2006 07:26:20 -0500 From: "Conrad J. Sabatier" <conrads@cox.net> To: Cheffo <stefan.lambrev@sun-fish.com> Cc: freebsd-stable@freebsd.org, freebsd-hardware@freebsd.org Subject: Re: nfsmb survey Message-ID: <20061024072620.69dac5ab@serene.no-ip.org> In-Reply-To: <4533D000.3020902@sun-fish.com> References: <4533BE2E.4080005@icyb.net.ua> <4533D000.3020902@sun-fish.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 16 Oct 2006 21:31:28 +0300, Cheffo <stefan.lambrev@sun-fish.com> wrote: > Andriy Gapon wrote: > > In STABLE and upcoming 6.2 (and in CURRENT, of course) there is a > > new SMB driver for NForce2/3/4 chipsets, nfsmb, developed by Ruslan > > Ermilov. However, the driver doesn't currently work on all hardware > > that it is to support. The problem is with choosing proper BAR > > registers, which, as it seems, might be different for different > > chipsets/SMB controllers. > > > > If you have a system based on NForce2/3/4, could you please share > > the following information: > > > > 1. find out pci handle of your SMB controller: > > $ pciconf -l | fgrep 0x0c0500 > > and also note chip field value, it should match > > 00(64|84|d4|e4|52)10de. E.g.: > > nfsmb0@pci0:1:1: class=0x0c0500 card=0x1c02147b > > chip=0x006410de rev=0xa2 hdr=0x00 > > > > 2. read values in BARs 4 and 5 and also registers 0x50 and 0x54 like > > follows: > > $ pciconf -r pci0:1:1 0x20 > > $ pciconf -r pci0:1:1 0x24 > > $ pciconf -r pci0:1:1 0x50 > > $ pciconf -r pci0:1:1 0x54 > > using your pci handle instead of pci0:1:1, e.g.: > > $ pciconf -r pci0:1:1 0x20 > > 00000000 > > $ pciconf -r pci0:1:1 0x24 > > 00000000 > > $ pciconf -r pci0:1:1 0x50 > > 00001001 > > $ pciconf -r pci0:1:1 0x54 > > 00001041 > > > > 3. send chip id and register values here. > > > > Thank you very much in advance. > > > > > none1@pci0:1:1: class=0x0c0500 card=0x815a1043 chip=0x005210de > rev=0xa2 hdr=0x00 > > pciconf -r pci0:1:1 0x20 > 00004c01 > pciconf -r pci0:1:1 0x24 > 00004c41pciconf -r pci0:1:1 0x50 > 00004c01 > pciconf -r pci0:1:1 0x54 > 00004c41 # pciconf -l | fgrep 0x0c0500 nfsmb0@pci0:1:1: class=0x0c0500 card=0x80c51043 chip=0x00d410de rev=0xa4 hdr=0x00 # pciconf -r pci0:1:1 0x20 00005001 # pciconf -r pci0:1:1 0x24 00005041 # pciconf -r pci0:1:1 0x50 00005001 # pciconf -r pci0:1:1 0x54 00005041 Thank you very much for your work on this! -- Conrad J. Sabatier <conrads@cox.net> -- "In Unix veritas"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20061024072620.69dac5ab>