Date: Wed, 27 May 1998 10:25:25 -0500 From: David Kelly <dkelly@hiwaay.net> To: freebsd-scsi@FreeBSD.ORG Subject: ncr problem? Message-ID: <199805271525.KAA11608@nospam.hiwaay.net>
next in thread | raw e-mail | index | archive | help
This system is running RELENG_2_2 as of the evening of April 20. "options FAILSAFE" is in my config file. % uname -a FreeBSD nospam.hiwaay.net 2.2.6-STABLE FreeBSD 2.2.6-STABLE #0: Mon Apr 20 20:49:10 CDT 1998 root@nospam.hiwaay.net:/usr/src/sys/compile/PPRO200 i386 Reported this problem several weeks ago but got no replies: May 1 21:37:46 nospam /kernel: ncr0:0: ERROR (20:0) (8-0-0) (f/3d) @ (script 418:c0000004). May 1 21:37:46 nospam /kernel: ncr0: script cmd = c1000060 May 1 21:37:46 nospam /kernel: ncr0: regdump: da 00 00 3d 47 0f 00 0f 20 08 80 00 00 00 07 0a. May 1 21:37:46 nospam /kernel: ncr0: have to clear fifos. May 1 21:37:46 nospam /kernel: ncr0: restart (fatal error). May 1 21:37:46 nospam /kernel: sd1(ncr0:0:0): COMMAND FAILED (9 ff) @f07b5800. May 1 21:37:46 nospam /kernel: sd1(ncr0:0:0): ABORTED COMMAND asc:4e,0 Overlapped commands attempted May 1 21:37:46 nospam /kernel: , retries:3 May 1 21:37:46 nospam /kernel: sd1(ncr0:0:0): WIDE SCSI (16 bit) enabledsd1(ncr0:0:0): 20.0 MB/s (100 ns, offset 15) May 1 21:53:51 nospam /kernel: ncr0:0: ERROR (81:0) (8-0-0) (f/3d) @ (mem 322828:00000000). May 1 21:53:51 nospam /kernel: ncr0: regdump: da 00 40 3d 47 0f 00 0f 35 08 80 00 80 00 0f 0a. May 1 21:53:51 nospam /kernel: ncr0: restart (fatal error). May 1 21:53:51 nospam /kernel: sd1(ncr0:0:0): COMMAND FAILED (9 ff) @f07b5800. May 1 21:53:51 nospam /kernel: sd1(ncr0:0:0): WIDE SCSI (16 bit) enabledsd1(ncr0:0:0): 20.0 MB/s (100 ns, offset 15) May 1 21:53:55 nospam /kernel: pid 16320 (XF86_Mach32), uid 0: exited on signal 6 And now another occured: May 26 19:24:20 nospam /kernel: ncr0:0: ERROR (81:0) (8-0-0) (f/3d) @ (script 424:c1000060). May 26 19:24:20 nospam /kernel: ncr0: script cmd = 725d0000 May 26 19:24:20 nospam /kernel: ncr0: regdump: da 00 00 3d 47 0f 00 0f 20 08 00 00 80 00 0f 0a. May 26 19:24:20 nospam /kernel: ncr0: restart (fatal error). May 26 19:24:20 nospam /kernel: sd1(ncr0:0:0): COMMAND FAILED (9 ff) @f07b5800. May 26 19:24:20 nospam /kernel: sd1(ncr0:0:0): WIDE SCSI (16 bit) enabledsd1(ncr0:0:0): 20.0 MB/s (100 ns, offset 15) At the very least, can somebody decode the above and explain? Bad blocks? Disk? Card? This is what dmesg has to say (at boot) about my SCSI stuff: ahc0 <Adaptec 2940 SCSI host adapter> rev 0 int a irq 9 on pci0:9:0 ahc0: aic7870 Single Channel, SCSI Id=7, 16 SCBs ahc0 waiting for scsi devices to settle (ahc0:0:0): "SEAGATE ST32550N 0021" type 0 fixed SCSI 2 sd0(ahc0:0:0): Direct-Access 2047MB (4194058 512 byte sectors) (ahc0:5:0): "ARCHIVE Python 28388-XXX 4.CM" type 1 removable SCSI 2 st0(ahc0:5:0): Sequential-Access density code 0x13, drive empty (ahc0:6:0): "ARCHIVE ANCDA 2750 28077 -003" type 1 removable SCSI 2 st1(ahc0:6:0): Sequential-Access density code 0x0, drive empty ncr0 <ncr 53c875 fast20 wide scsi> rev 3 int a irq 11 on pci0:11:0 ncr0 waiting for scsi devices to settle (ncr0:0:0): WIDE SCSI (16 bit) enabled(ncr0:0:0): 10.0 MB/s (200 ns, offset 15) (ncr0:0:0): "IBM OEM DCHS09W 2222" type 0 fixed SCSI 2 sd1(ncr0:0:0): Direct-Access sd1(ncr0:0:0): WIDE SCSI (16 bit) enabled sd1(ncr0:0:0): 20.0 MB/s (100 ns, offset 15) 8689MB (17796077 512 byte sectors) Just today I was planning on pulling the little 2G drive off the 2940 for Macintosh use. Was thinking about leaving the 2940 in for tape drives only, also thinking about using the narrow internal connector on the Asus SC875 for the tape drives. But if funny things are happening I'd rather not mess with what works. Then again, maybe moving the tapes to to ncr0 would break things bad enough to find the problem? Any ideas? Firmware in the IBM 9G drive? Firmware on the '875? Bad cables? -- David Kelly N4HHE, dkelly@nospam.hiwaay.net ===================================================================== The human mind ordinarily operates at only ten percent of its capacity -- the rest is overhead for the operating system. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199805271525.KAA11608>