Date: Tue, 2 Feb 1999 15:52:58 +1030 From: Greg Lehey <grog@lemis.com> To: Castor Fu <castor@geocast.net> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Only CD on IDE w/ SCSI disk? Message-ID: <19990202155258.R76680@freebie.lemis.com> In-Reply-To: <Pine.GSO.4.03.9902012117060.29290-100000@geo.geocast.net>; from Castor Fu on Mon, Feb 01, 1999 at 09:19:55PM -0800 References: <19990202151729.O76680@freebie.lemis.com> <Pine.GSO.4.03.9902012117060.29290-100000@geo.geocast.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Monday, 1 February 1999 at 21:19:55 -0800, Castor Fu wrote: > On Tue, 2 Feb 1999, Greg Lehey wrote: > >> On Monday, 1 February 1999 at 20:19:59 -0800, Castor Fu wrote: >>> I have a system with an ATAPI IDE CD-ROM drive (Lucky Goldstar CRD-8322B), >>> and a SCSI hard disk off a Diamond Fireport 40 controller. >>> >>> When I try booting off a FreeBSD-2.2.8 installation CD, the kernel >>> doesn't detect the IDE CD-ROM unless I also hook up an IDE Disk. >>> >>> I've tried using the "Cable Select", "Master" and "Slave" settings >>> on the drive, and they all fail. When using "Cable Select" or "Master" the IDE >>> controller is detected but the drive is not. With the "Slave" setting, >>> the controller is not detected at all. >>> >>> Should FreeBSD-2.x be able to work with just one IDE device which is a >>> CD-ROM? >> >> It should be able to, but it's a weak area. Is it possible that your >> CD-ROM should be jumpered for neither master nor slave when it's by >> itself? Probably the easiest thing to do is to download the 3.0 boot >> disk; you don't need to install 3.0, but it'll tell you if it finds >> the CD-ROM or not. > > I assumed that the "Cable Select" position was equivalent to neither > master nor slave. Booting with the FreeBSD-3.0-RELEASE boot floppy doesn't > detect the CD-ROM drive either. Is the new Atapi-CD driver likely to > change things? I believe the new driver is already there in 3.0-RELEASE. This looks like bad news. > Linux works just fine in this configuration. That at least confirms that you have the jumpers set correctly. I'll check who's supporting this stuff. Greg -- When replying to this message, please copy the original recipients. For more information, see http://www.lemis.com/questions.html See complete headers for address, home page and phone numbers finger grog@lemis.com for PGP public key To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990202155258.R76680>