Date: Thu, 1 Mar 2012 16:55:03 -0500 From: Jung-uk Kim <jkim@FreeBSD.org> To: freebsd-stable@FreeBSD.org Cc: Alexey Dokuchaev <danfe@nsu.ru>, Hans Petter Selasky <hselasky@c2i.net> Subject: Re: Resume broken in 8.3-PRERELEASE Message-ID: <201203011655.05964.jkim@FreeBSD.org> In-Reply-To: <201203011953.52600.hselasky@c2i.net> References: <20120227152238.GA2940@regency.nsu.ru> <20120301171125.GA61435@regency.nsu.ru> <201203011953.52600.hselasky@c2i.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thursday 01 March 2012 01:53 pm, Hans Petter Selasky wrote: > On Thursday 01 March 2012 18:11:25 Alexey Dokuchaev wrote: > > On Mon, Feb 27, 2012 at 10:22:38PM +0700, Alexey Dokuchaev wrote: > > > On Mon, Feb 27, 2012 at 09:28:15PM +0700, Alexey Dokuchaev wrote: > > > > I was mistaken, the latest kernel with working resume is from > > > > Jan 4 00:00 UTC, kernel from Jan 4 01:00 UTC does not allow > > > > my laptop to come back from zzz(8) successfully. It seems > > > > that offending change is rev. 1.9.2.5 of > > > > sys/nfsclient/nfs_krpc.c by rmacklem@ (SVN rev 229450). > > > > I've redone my bisecting, now suspending/resuming around at least > > ten times in console with zzz(8). I must apologize to rmacklem@, > > his commit has nothing to do with it. Apparently, the culprit is > > SVN rev 229370 on 2012-01-03 09:15:54Z by hselasky@, which > > (ironically enough) supposed to bring better support for USB > > controller suspend and resume. Kernel csuped and built before > > this date resumes just fine for me. However, the problem might > > lay deeper: disabling all USB modules (I traditionally run slim > > kernels with everything down to io/mem offloaded into modules) > > does not fix the hang, see below. Selectively disabling UHCI or > > EHCI does not make any difference either. > > > > Debugging of this issue is, however, complicated by the fact that > > doing "call doadump" results in "Dumping 68M:" message (similar > > problem was reported[1] by glebius@ back in 2004), and then > > nothing happens except for IDE led light-up and frozen debugger, > > which makes post-mortem analysis with kgdb(1) impossible. > > Setting up serial console (since it's a laptop, the only > > possibility for me right now is to use some noname USB adapter > > via uftdi(4)) works, but kernel GDB does not like it. Perhaps > > I'm just not passing 0x80 flag correctly, but > > hint.uftdi.0.flags="0x80" does not work. Is GDB backend > > impossible with USB serial adapters, or I am just doing it wrong? > > > > What strikes me most is that even with plain kbdmux(4) or > > atkdb(4) I still cannot resume, even on previous (before r229370) > > kernels (the earliest I've tried is from Jan 1 00:00 UTC). Any > > debugging hints or patches to try are highly appreciated. > > > > Thus far, the latest kernel where resume works (with USB stuff > > enabled) is from Jan 3 19:15 UTC. Hans Petter, do you have any > > ideas about it? > > Hi, > > The USB controllers should be reset after resume. > > Suspend is currently ASYNC. This might be one problem. > > Resume is also ASYNC, because we cannot block in the > device_resume() callback. > > Make sure no serial port adapters have open devices and are > blocking suspend and resume. > > What is output from usbconfig as root, before and after > suspend/resume ? It does not make a difference for me (i.e., usb suspend/resume still broken) but I think I found a typo: Index: sys/dev/usb/controller/usb_controller.c =================================================================== --- sys/dev/usb/controller/usb_controller.c (revision 232365) +++ sys/dev/usb/controller/usb_controller.c (working copy) @@ -407,7 +407,7 @@ usb_bus_suspend(struct usb_proc_msg *pm) USB_BUS_UNLOCK(bus); - bus_generic_shutdown(bus->bdev); + bus_generic_suspend(bus->bdev); usbd_enum_lock(udev); Jung-uk Kim
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201203011655.05964.jkim>