Date: Tue, 09 Sep 2003 14:57:45 +0200 From: des@des.no (Dag-Erling =?iso-8859-1?q?Sm=F8rgrav?=) To: Nate Lawson <nate@root.org> Cc: current@freebsd.org Subject: Re: ACPI problems on MSI K7D Message-ID: <xzpptia9l12.fsf@dwp.des.no> References: <20030906141328.Q78854@root.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--=-=-=
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: quoted-printable
Nate Lawson <nate@root.org> writes:
> Please report the dmesg from boot -v as that should help figure out why
> pci_cfgregopen() fails.
Full log attached, both with and without ACPI.
> Also, I think the following should be "\_S3":
> Name (\SS3, Package (0x04)
That shouldn't have any impact on my problem though, should it?
DES
--=20
Dag-Erling Sm=F8rgrav - des@des.no
--=-=-=
Content-Disposition: attachment; filename=acpi.txt
Console: serial port
BIOS drive A: is disk0
BIOS drive C: is disk1
BIOS 640kB/523200kB available memory
FreeBSD/i386 bootstrap loader, Revision 1.1
(des@meali.registrar.no, Mon Sep 1 18:48:59 CEST 2003)
Loading /boot/defaults/loader.conf
/boot/kernel/kernel text=0x1eaadc data=0x22608+0x44e34 syms=[0x4+0x2cfa0+0x4+0x372f6]
/boot/kernel/snd_ich.ko text=0x31e4 data=0x284 syms=[0x4+0x960+0x4+0x964]
loading required module 'snd_pcm'
/boot/kernel/snd_pcm.ko text=0x1412c data=0x24d8+0x1124 syms=[0x4+0x2a20+0x4+0x2e0d]
/boot/kernel/usb.ko text=0x1fad0 data=0xc4c+0x168 syms=[0x4+0x2c70+0x4+0x33ce]
/boot/kernel/ums.ko text=0x22e0 data=0x168+0x4 syms=[0x4+0x5f0+0x4+0x52f]
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel] in 3 seconds...
Type '?' for a list of commands, 'help' for more detailed help.
OK boot -v
/boot/kernel/acpi.ko text=0x3aa2c data=0x170c+0xec0 syms=[0x4+0x5bf0+0x4+0x7a42]
SMAP type=01 base=0000000000000000 len=00000000000a0000
SMAP type=02 base=00000000000f0000 len=0000000000010000
SMAP type=02 base=00000000fec00000 len=0000000001400000
SMAP type=01 base=0000000000100000 len=000000001fef0000
SMAP type=03 base=000000001fff3000 len=000000000000d000
SMAP type=04 base=000000001fff0000 len=0000000000003000
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #9: Mon Sep 1 19:06:40 CEST 2003
des@meali.registrar.no:/usr/src/sys/i386/compile/meali
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0453000.
Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc04531d8.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc0453284.
Preloaded elf module "/boot/kernel/usb.ko" at 0xc0453330.
Preloaded elf module "/boot/kernel/ums.ko" at 0xc04533d8.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0453480.
Calibrating clock(s) ... i8254 clock: 1193232 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1363433775 Hz
CPU: AMD Athlon(tm) MP 1500+ (1363.43-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x681 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
Data TLB: 32 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory = 536805376 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x000000000047d000 - 0x000000001f6c9fff, 522506240 bytes (127565 pages)
avail memory = 516714496 (492 MB)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): apic id: 0, version: 0x00040010, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040010, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
bios32: Found BIOS32 Service Directory header at 0xc00fac90
bios32: Entry = 0xfb100 (c00fb100) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb130
pnpbios: Found PnP BIOS data at 0xc00fbb30
pnpbios: Entry = f0000:bb60 Rev = 1.0
Other BIOS signatures found:
null: <null device, zero device>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
random: <entropy source>
SMP: CPU0 bsp_apic_configure():
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AMD2P AWRDACPI> on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2): mode 2 enable port (0x0cf8) is 0xff
panic: AcpiOsDerivePciId unable to initialize pci bus
cpuid = 0; lapic.id = 00000000
Debugger("panic")
Stopped at Debugger+0x4e: xchgl %ebx,in_Debugger.0
db> where
Debugger(c02d384b,0,c0441336,c04757c4,100) at Debugger+0x4e
panic(c0441336,c042c47c,c400e940,c043db4a,1) at panic+0x151
AcpiOsDerivePciId(c3f60b40,c3f60940,c0475804,168,0) at AcpiOsDerivePciId+0x2d
AcpiEvPciConfigRegionSetup(c3fa6280,0,0,c047585c,c4004680) at AcpiEvPciConfigRegionSetup+0x224
AcpiEvAddressSpaceDispatch(c3fa6280,0,56,0,8) at AcpiEvAddressSpaceDispatch+0x86
AcpiExAccessRegion(c400e780,0,c047590c,0,c401ae00) at AcpiExAccessRegion+0x70
AcpiExFieldDatumIo(c400e780,0,c047590c,0,14f) at AcpiExFieldDatumIo+0x157
AcpiExExtractFromField(c400e780,c401ae0c,4,1,167) at AcpiExExtractFromField+0x8a
AcpiExReadDataFromField(c4006000,c400e780,c0475960,0,0) at AcpiExReadDataFromField+0x14f
AcpiExResolveNodeToValue(c40061b4,c4006000,6,c3f60920,c04759bc) at AcpiExResolveNodeToValue+0xdb
AcpiExResolveToValue(c40061b4,c4006000,c4006000,0,c04759b0) at AcpiExResolveToValue+0x53
AcpiExResolveOperands(7b,c40061b4,c4006000,6,c4006000) at AcpiExResolveOperands+0x1b2
AcpiDsExecEndOp(c4006000,c0475a08,c4006018,c4006010,c04415ab) at AcpiDsExecEndOp+0xa7
AcpiPsParseLoop(c4006000,c40093c0,c0475ab8,c4006000,c40061e4) at AcpiPsParseLoop+0x686
AcpiPsParseAml(c4006000,c14fa280,c4008ee0,d84177c1,16) at AcpiPsParseAml+0x7c
AcpiPsxExecute(c4008ee0,0,c0475b40,c4008ee0,c0475bd4) at AcpiPsxExecute+0x202
AcpiNsExecuteControlMethod(c4008ee0,0,c0475b40,c1502380,0) at AcpiNsExecuteControlMethod+0x5f
AcpiNsEvaluateByHandle(c4008ee0,0,c0475bd4,e,0) at AcpiNsEvaluateByHandle+0x96
AcpiNsEvaluateRelative(c4008f40,c043ec6d,0,c0475bd4,c0475bf4) at AcpiNsEvaluateRelative+0xde
AcpiUtEvaluateObject(c4008f40,c043ec6d,1,c0475bfc,c1502380) at AcpiUtEvaluateObject+0x30
AcpiUtExecute_STA(c4008f40,c0475c20,0,0,c0475c30) at AcpiUtExecute_STA+0x31
AcpiNsInitOneDevice(c4008f40,3,c0475c84,0,6) at AcpiNsInitOneDevice+0x77
AcpiNsWalkNamespace(6,ffffffff,ffffffff,0,c0422020) at AcpiNsWalkNamespace+0xb3
AcpiNsInitializeDevices(0,c0475cdc,c042e778,0,2) at AcpiNsInitializeDevices+0x53
AcpiInitializeObjects(0,2,c041e600,c0418680,0) at AcpiInitializeObjects+0x3a
acpi_attach(c4004280,c3ff3098,c030e110,c0442528,c14e9cb0) at acpi_attach+0x158
device_probe_and_attach(c4004280,c1502800,c0475d2c,c02a290c,c1502800) at device_probe_and_attach+0xaa
bus_generic_attach(c1502800,c1502800,c0475d5c,c01b338a,c1502800) at bus_generic_attach+0x19
nexus_attach(c1502800,c3fa1098,c030e110,c02e4b1f,0) at nexus_attach+0x1c
device_probe_and_attach(c1502800,c14e7e38,c0475d80,c028d13e,c1503080) at device_probe_and_attach+0xaa
root_bus_configure(c1503080,c02e4b1f,0,c0475d98,c0176469) at root_bus_configure+0x1b
configure(0,472000,472c00,472000,0) at configure+0x2e
mi_startup() at mi_startup+0x99
begin() at begin+0x2c
db> call cpu_reset
--=-=-=
Content-Disposition: attachment; filename=noacpi.txt
Console: serial port
BIOS drive A: is disk0
BIOS drive C: is disk1
BIOS 640kB/523200kB available memory
FreeBSD/i386 bootstrap loader, Revision 1.1
(des@meali.registrar.no, Mon Sep 1 18:48:59 CEST 2003)
Loading /boot/defaults/loader.conf
/boot/kernel/kernel text=0x1eaadc data=0x22608+0x44e34 syms=[0x4+0x2cfa0+0x4+0x372f6]
/boot/kernel/snd_ich.ko text=0x31e4 data=0x284 syms=[0x4+0x960+0x4+0x964]
loading required module 'snd_pcm'
/boot/kernel/snd_pcm.ko text=0x1412c data=0x24d8+0x1124 syms=[0x4+0x2a20+0x4+0x2e0d]
/boot/kernel/usb.ko text=0x1fad0 data=0xc4c+0x168 syms=[0x4+0x2c70+0x4+0x33ce]
/boot/kernel/ums.ko text=0x22e0 data=0x168+0x4 syms=[0x4+0x5f0+0x4+0x52f]
Hit [Enter] to boot immediately, or any other key for command prompt.
Type '?' for a list of commands, 'help' for more detailed help.
OK unset acpi_load
OK boot -v
SMAP type=01 base=0000000000000000 len=00000000000a0000
SMAP type=02 base=00000000000f0000 len=0000000000010000
SMAP type=02 base=00000000fec00000 len=0000000001400000
SMAP type=01 base=0000000000100000 len=000000001fef0000
SMAP type=03 base=000000001fff3000 len=000000000000d000
SMAP type=04 base=000000001fff0000 len=0000000000003000
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #9: Mon Sep 1 19:06:40 CEST 2003
des@meali.registrar.no:/usr/src/sys/i386/compile/meali
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0408000.
Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc04081d8.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc0408284.
Preloaded elf module "/boot/kernel/usb.ko" at 0xc0408330.
Preloaded elf module "/boot/kernel/ums.ko" at 0xc04083d8.
Calibrating clock(s) ... i8254 clock: 1193233 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1363433690 Hz
CPU: AMD Athlon(tm) MP 1500+ (1363.43-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x681 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
Data TLB: 32 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory = 536805376 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000432000 - 0x000000001f6c9fff, 522813440 bytes (127640 pages)
avail memory = 517025792 (493 MB)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): apic id: 0, version: 0x00040010, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040010, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
bios32: Found BIOS32 Service Directory header at 0xc00fac90
bios32: Entry = 0xfb100 (c00fb100) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb130
pnpbios: Found PnP BIOS data at 0xc00fbb30
pnpbios: Entry = f0000:bb60 Rev = 1.0
Other BIOS signatures found:
null: <null device, zero device>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
random: <entropy source>
SMP: CPU0 bsp_apic_configure():
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x80003840
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=700c1022)
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00fdec0
PCI-Only Interrupts: 11 12
Location Bus Device Pin Link IRQs
slot 1 0 8 A 0x01 3 4 5 7 9 10 11 12 14 15
slot 1 0 8 B 0x02 3 4 5 7 9 10 11 12 14 15
slot 1 0 8 C 0x03 3 4 5 7 9 10 11 12 14 15
slot 1 0 8 D 0x04 3 4 5 7 9 10 11 12 14 15
slot 2 0 9 A 0x02 3 4 5 7 9 10 11 12 14 15
slot 2 0 9 B 0x03 3 4 5 7 9 10 11 12 14 15
slot 2 0 9 C 0x04 3 4 5 7 9 10 11 12 14 15
slot 2 0 9 D 0x01 3 4 5 7 9 10 11 12 14 15
slot 3 0 1 A 0x01 3 4 5 7 9 10 11 12 14 15
slot 3 0 1 B 0x02 3 4 5 7 9 10 11 12 14 15
slot 3 0 1 C 0x03 3 4 5 7 9 10 11 12 14 15
slot 3 0 1 D 0x04 3 4 5 7 9 10 11 12 14 15
slot 4 1 5 A 0x02 3 4 5 7 9 10 11 12 14 15
slot 4 1 5 B 0x03 3 4 5 7 9 10 11 12 14 15
slot 4 1 5 C 0x04 3 4 5 7 9 10 11 12 14 15
slot 4 1 5 D 0x01 3 4 5 7 9 10 11 12 14 15
slot 5 2 4 A 0x01 3 4 5 7 9 10 11 12 14 15
slot 5 2 4 B 0x02 3 4 5 7 9 10 11 12 14 15
slot 5 2 4 C 0x03 3 4 5 7 9 10 11 12 14 15
slot 5 2 4 D 0x04 3 4 5 7 9 10 11 12 14 15
slot 6 2 5 A 0x02 3 4 5 7 9 10 11 12 14 15
slot 6 2 5 B 0x03 3 4 5 7 9 10 11 12 14 15
slot 6 2 5 C 0x04 3 4 5 7 9 10 11 12 14 15
slot 6 2 5 D 0x01 3 4 5 7 9 10 11 12 14 15
slot 7 2 6 A 0x03 3 4 5 7 9 10 11 12 14 15
slot 7 2 6 B 0x04 3 4 5 7 9 10 11 12 14 15
slot 7 2 6 C 0x01 3 4 5 7 9 10 11 12 14 15
slot 7 2 6 D 0x02 3 4 5 7 9 10 11 12 14 15
slot 8 2 9 A 0x02 3 4 5 7 9 10 11 12 14 15
slot 8 2 9 B 0x03 3 4 5 7 9 10 11 12 14 15
slot 8 2 9 C 0x04 3 4 5 7 9 10 11 12 14 15
slot 8 2 9 D 0x01 3 4 5 7 9 10 11 12 14 15
embedded 2 0 A 0x04 3 4 5 7 9 10 11 12 14 15
embedded 2 0 B 0x04 3 4 5 7 9 10 11 12 14 15
embedded 2 0 C 0x04 3 4 5 7 9 10 11 12 14 15
embedded 2 0 D 0x04 3 4 5 7 9 10 11 12 14 15
embedded 0 7 A 0x01 3 4 5 7 9 10 11 12 14 15
embedded 0 7 B 0x02 3 4 5 7 9 10 11 12 14 15
embedded 0 7 C 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 7 D 0x04 3 4 5 7 9 10 11 12 14 15
embedded 0 1 A 0x02 3 4 5 7 9 10 11 12 14 15
embedded 0 1 B 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 1 C 0x04 3 4 5 7 9 10 11 12 14 15
embedded 0 1 D 0x01 3 4 5 7 9 10 11 12 14 15
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base e8000000, size 27, enabled
map[14]: type 3, range 32, base fc000000, size 12, enabled
map[18]: type 4, range 32, base 0000ec00, size 2, port disabled
found-> vendor=0x1022, dev=0x700c, revid=0x11
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x700d, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x0e (3500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x7440, revid=0x05
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000e000, size 4, enabled
found-> vendor=0x1022, dev=0x7441, revid=0x04
bus=0, slot=7, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x7443, revid=0x03
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
IOAPIC #0 intpin 17 -> irq 2
Freeing (NOT implemented) redirected PCI irq 11.
map[10]: type 4, range 32, base 0000e400, size 8, enabled
map[14]: type 4, range 32, base 0000e800, size 6, enabled
found-> vendor=0x1022, dev=0x7445, revid=0x03
bus=0, slot=7, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=2
found-> vendor=0x1022, dev=0x7448, revid=0x05
bus=0, slot=16, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x2220, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
agp0: <AMD 762 host to AGP bridge> port 0xec00-0xec03 mem 0xfc000000-0xfc000fff,0xe8000000-0xefffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 128M
agp0: gatt -> ag_pdir 0x53c000
agp0: allocating GATT for 32768 AGP page entries
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xc000-0xcfff
pcib1: memory decode 0xf8000000-0xf9ffffff
pcib1: prefetched decode 0xf0000000-0xf7ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
Freeing (NOT implemented) redirected PCI irq 11.
map[10]: type 3, range 32, base f0000000, size 27, enabled
map[14]: type 4, range 32, base 0000c000, size 8, enabled
map[18]: type 1, range 32, base f9000000, size 16, enabled
found-> vendor=0x1002, dev=0x5157, revid=0x00
bus=1, slot=5, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=2
powerspec 2 supports D0 D1 D2 D3 current D0
pci1: <display, VGA> at device 5.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 768 UDMA100 controller> port 0xe000-0xe00f at device 7.1 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: reset tp3 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x10 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 mask=03 stat0=10 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: reset tp3 devices=0x4<ATAPI_MASTER>
ata1: at 0x170 irq 15 on atapci0
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pcm0: <AMD-768> port 0xe800-0xe83f,0xe400-0xe4ff irq 2 at device 7.5 on pci0
pcm0: <Avance Logic ALC200 AC97 Codec (id = 0x414c4710)>
pcm0: Codec features headphone, 18 bit DAC, 18 bit ADC, 5 bit master volume, Realtek 3D Stereo Enhancement
pcm0: Primary codec extended features variable rate PCM, reserved 1, AMAP, reserved 4
pcm0: sndbuf_setmap 597000, 4000; 0xe0437000 -> 597000
pcm0: sndbuf_setmap 5b2000, 4000; 0xe043b000 -> 5b2000
pcib2: <PCIBIOS PCI-PCI bridge> at device 16.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xd000-0xdfff
pcib2: memory decode 0xfa000000-0xfbffffff
pcib2: prefetched decode 0xfff00000-0xfffff
pci2: <PCI bus> on pcib2
pci2: physical bus=2
IOAPIC #0 intpin 19 -> irq 11
Freeing (NOT implemented) redirected PCI irq 12.
map[10]: type 1, range 32, base fb020000, size 12, enabled
found-> vendor=0x1022, dev=0x7449, revid=0x07
bus=2, slot=0, func=0
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=d, irq=11
Freeing (NOT implemented) redirected PCI irq 11.
map[10]: type 1, range 32, base fb021000, size 12, enabled
map[14]: type 4, range 32, base 0000d000, size 6, enabled
map[18]: type 1, range 32, base fb000000, size 17, enabled
found-> vendor=0x8086, dev=0x1229, revid=0x10
bus=2, slot=9, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=2
powerspec 2 supports D0 D1 D2 D3 current D0
ohci0: <OHCI (generic) USB controller> mem 0xfb020000-0xfb020fff irq 11 at device 0.0 on pci2
pcib2: device ohci0 requested decoded memory range 0xfb020000-0xfb020fff
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
pci2: <network, ethernet> at device 9.0 (no driver attached)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
pnpbios: 16 devices, largest 92 bytes
PNP0200: adding dma mask 0x10
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x81-0x83, size=0x3, align=0
PNP0200: adding io range 0x87-0x87, size=0x1, align=0
PNP0200: adding io range 0x89-0x8b, size=0x3, align=0
PNP0200: adding io range 0x8f-0x91, size=0x3, align=0
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0
pnpbios: handle 1 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
pnpbios: handle 2 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
pnpbios: handle 3 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
pnpbios: handle 4 device ID PNP0303 (0303d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0
pnpbios: handle 5 device ID PNP0800 (0008d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0
pnpbios: handle 6 device ID PNP0c04 (040cd041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000
PNP0c01: adding fixed memory32 range 0xfec00000-0xfec0ffff, size=0x10000
PNP0c01: adding fixed memory32 range 0xfee00000-0xfee0ffff, size=0x10000
PNP0c01: adding fixed memory32 range 0x100000-0x1fffffff, size=0x1ff00000
pnpbios: handle 7 device ID PNP0c01 (010cd041)
PNP0c02: adding fixed memory32 range 0xf0000-0xf3fff, size=0x4000
PNP0c02: adding fixed memory32 range 0xf4000-0xf7fff, size=0x4000
PNP0c02: adding fixed memory32 range 0xf8000-0xfffff, size=0x8000
PNP0c02: adding fixed memory32 range 0xd1800-0xd3fff, size=0x2800
pnpbios: handle 8 device ID PNP0c02 (020cd041)
PNP0a03: adding io range 0x290-0x29f, size=0x10, align=0
PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
PNP0a03: adding io range 0x600-0x67f, size=0x80, align=0
PNP0a03: adding io range 0x680-0x6ff, size=0x80, align=0
pnpbios: handle 9 device ID PNP0a03 (030ad041)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
pnpbios: handle 11 device ID PNP0501 (0105d041)
PNP0700: adding dma mask 0x4
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0
PNP0700: adding irq mask 0x40
pnpbios: handle 12 device ID PNP0700 (0007d041)
PNP0400: adding irq mask 0x80
PNP0400: adding io range 0x378-0x37f, size=0x8, align=0
PNP0400: adding io range 0x778-0x77b, size=0x4, align=0
pnpbios: handle 13 device ID PNP0400 (0004d041)
PNP0501: adding irq mask 0x8
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0
pnpbios: handle 15 device ID PNP0501 (0105d041)
PNPb006: adding irq mask 0x400
PNPb006: adding io range 0x330-0x331, size=0x2, align=0
pnpbios: handle 16 device ID PNPb006 (06b0d041)
PNPb02f: adding io range 0x201-0x207, size=0x7, align=0
PNPb02f: adding io range 0x200-0x200, size=0x1, align=0
pnpbios: handle 17 device ID PNPb02f (2fb0d041)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xd0000-0xd17ff,0xc0000-0xccfff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000
psm0: current command byte:0067
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lp0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0xc041 0xc051 0xc041 0xc041
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: irq maps: 0xc041 0xc049 0xc041 0xc041
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
unknown: <PNP0400> can't assign resources (port)
unknown: <PNP0400> at port 0x378-0x37f on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x2f8-0x2ff on isa0
unknown: <PNPb006> failed to probe at port 0x330-0x331 irq 10 on isa0
unknown: <PNPb02f> failed to probe at port 0x200,0x201-0x207 on isa0
SMP: enabled INTs: 1, 2, 3, 4, 6, 7, 14, 15, apic_imen: 0xffff3f21
Device configuration finished.
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Timecounter "TSC" frequency 1363433690 Hz quality -100
Timecounters tick every 10.000 msec
lo0: bpf attached
ata0-master: pio=0x0c wdma=0x22 udma=0x46 cable=80pin
ad0: setting UDMA100 on AMD 768 chip
GEOM: create disk ad0 dp=0xc4132470
ad0: <Maxtor 2F040J0/VAM51JJ0> ATA-7 disk at ata0-master
ad0: 39205MB (80293248 sectors), 79656 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
ar: FreeBSD check1 failed
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:80292807
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 41109917184 end 41109949439
GEOM: Configure ad0s1a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s1b, start 805306368 length 1073741824 end 1879048191
GEOM: Configure ad0s1c, start 0 length 41109917184 end 41109917183
GEOM: Configure ad0s1d, start 268435456 length 536870912 end 805306367
GEOM: Configure ad0s1e, start 1879048192 length 39230868992 end 41109917183
acd0: setting UDMA33 on AMD 768 chip
acd0: <HL-DT-ST GCE-8520B/1.02> CDRW drive at ata1 as master
acd0: read 6890KB/s (6890KB/s) write 688KB/s (8957KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
pcm0: measured ac97 link rate at 48154 Hz, will use 48000 Hz
SMP: AP CPU #1 Launched!
SMP: CPU1 ap_init():
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
Mounting root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
Loading configuration files.
Entropy harvesting: interrupts ethernet point_to_point.
swapon: adding /dev/ad0s1b as swap device
Starting file system checks:
/dev/ad0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1a: clean, 81391 free (583 frags, 10101 blocks, 0.5% fragmentation)
/dev/ad0s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1d: clean, 227201 free (881 frags, 28290 blocks, 0.3% fragmentation)
/dev/ad0s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1e: clean, 11278261 free (106693 frags, 1396446 blocks, 0.6% fragmentation)
procfs registered
Linux ELF exec handler installed
linprocfs registered
Setting hostname: meali.registrar.no.
fxp0: <Intel 82551 Pro/100 Ethernet> port 0xd000-0xd03f mem 0xfb000000-0xfb01ffff,0xfb021000-0xfb021fff irq 2 at device 9.0 on pci2
pcib2: device fxp0 requested decoded memory range 0xfb021000-0xfb021fff
fxp0: using memory space register mapping
fxp0: Ethernet address 00:0c:76:27:c9:43
fxp0: PCI IDs: 8086 1229 1014 0207 0010
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.0.203 netmask 0xffffff00 broadcast 192.168.0.255
ether 00:0c:76:27:c9:43
media: Ethernet autoselect (none)
status: no caririer
pfw2 initialized, divert disabled, rule-based forwarding enabled, default to deny, logging disabled
00100 allow ip from any to any via lo0
00200 check-state
00300 deny ip from any to 0.0.0.0/8
00400 deny ip from 0.0.0.0/8 to any
00500 deny ip from any to 10.0.0.0/8
00600 deny ip from 10.0.0.0/8 to any
00700 deny ip from any to 169.254.0.0/16
00800 deny ip from 127.0.0.0/8 to any
00900 deny ip from any to 127.0.0.0/8
01000 deny ip from 169.254.0.0/16 to any
01100 deny ip from any to 172.16.0.0/12
01200 deny ip from 172.16.0.0/12 to any
01300 deny ip from any to 192.0.2.0/24
01400 deny ip from 192.0.2.0/24 to any
01500 deny ip from any to 224.0.0.0/4
01600 deny ip from 224.0.0.0/4 to any
01700 deny ip from any to 240.0.0.0/4
01800 deny ip from 240.0.0.0/4 to any
01900 allow icmp from any to any icmptypes 0,3,8,11
02000 allow tcp from me to any setup out keep-state
02100 allow tcp from any to me dst-port 22 setup in keep-state
02200 allow tcp from 192.168.0.0/24 to me dst-port 80 setup in keep-state
02300 allow tcp from 192.168.0.0/24 to me dst-port 8080 setup in keep-state
02400 allow udp from me to any dst-port 53,123 out keep-state
02500 deny udp from any to any dst-port 137,138,2222
02600 deny log udp from any to any
02700 deny log tcp from any to me setup
02800 deny ip from any to any
Firewall rules loaded, starting divert daemons:.
Firewall logging enabled
net.inet.ip.fw.enable: 1 -> 1
add net default: gateway 192.168.0.1
Additional routing options:.
hw.bus.devctl_disable: 0 -> 1
Mounting NFS file systems:.
Starting syslogd.
Starting ntpdate.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout
Starting local daemons:.
Starting lpd.
Updating motd.
Starting ntpd.
Configuring syscons: keyrate font8x16 font8x14 font8x8 blanktime screensaver.
Starting sshd.
Initial i386 initialization:.
Additional ABI support: linux.
Starting cron.
Local package initialization: apache2.
Additional TCP options:.
Starting moused:.
Starting background file system checks in 60 seconds.
Tue Sep 9 14:35:08 CEST 2003
drm0: <ATI Radeon QW RV200 7500> port 0xc000-0xc0ff mem 0xf9000000-0xf900ffff,0xf0000000-0xf7ffffff irq 2 at device 5.0 on pci1
info: [drm] AGP at 0xe8000000 128MB
info: [drm] Initialized radeon 1.9.0 20020828 on minor 0
--=-=-=--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?xzpptia9l12.fsf>