Date: Fri, 05 Mar 2010 22:20:18 +0200 From: Ian FREISLICH <ianf@clue.co.za> To: pyunyh@gmail.com Cc: current@freebsd.org Subject: Re: dev.bce.X.com_no_buffers increasing and packet loss Message-ID: <E1Nne0Q-0003uZ-OR@clue.co.za> In-Reply-To: <20100305184046.GD14818@michelle.cdnetworks.com> References: <20100305184046.GD14818@michelle.cdnetworks.com> <20100305175639.GB14818@michelle.cdnetworks.com> <E1NnVaT-0003Ft-3p@clue.co.za> <E1Nnc4d-0003mB-6e@clue.co.za>
next in thread | previous in thread | raw e-mail | index | archive | help
Pyun YongHyeon wrote:
>
> Would you show me the output of dmesg(bce(4)/brgphy(4) only) and
> the output of "pciconf -lcbv" for the controller?
[firewall1.jnb1] ~ # egrep "bce|brgphy" /var/run/dmesg.boot
bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem 0xe6000000-0xe7ffffff irq 72 at device 0.0 on pci4
miibus0: <MII bus> on bce0
brgphy0: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bce0: Ethernet address: 00:1e:c9:4a:33:b9
bce0: [ITHREAD]
bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C (4.0.3); Flags (MSI|MFW); MFW (ipms 1.6.0)
bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem 0xe8000000-0xe9ffffff irq 75 at device 0.0 on pci6
miibus1: <MII bus> on bce1
brgphy1: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bce1: Ethernet address: 00:1e:c9:4a:33:bb
bce1: [ITHREAD]
bce1: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C (4.0.3); Flags (MSI|MFW); MFW (ipms 1.6.0)
bce2: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem 0xea000000-0xebffffff irq 33 at device 0.0 on pci8
miibus2: <MII bus> on bce2
brgphy2: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus2
brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bce2: Ethernet address: 00:1e:4f:fb:cf:c5
bce2: [ITHREAD]
bce2: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C (4.0.3); Flags (MSI|MFW); MFW (ipms 1.6.0)
bce3: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem 0xec000000-0xedffffff irq 37 at device 0.0 on pci10
miibus3: <MII bus> on bce3
brgphy3: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus3
brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bce3: Ethernet address: 00:1e:4f:fb:cf:c7
bce3: [ITHREAD]
bce3: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C (4.0.3); Flags (MSI|MFW); MFW (ipms 1.6.0)
bce0@pci0:4:0:0: class=0x020000 card=0x02231028 chip=0x164c14e4 rev=0x12 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'Broadcom NetXtreme II Gigabit Ethernet Adapter (BCM5708)'
class = network
subclass = ethernet
bar [10] = type Memory, range 64, base 0xe6000000, size 33554432, enabled
cap 07[40] = PCI-X 64-bit supports 133MHz, 512 burst read, 8 split transactions
cap 01[48] = powerspec 2 supports D0 D3 current D0
cap 03[50] = VPD
cap 05[58] = MSI supports 1 message, 64 bit enabled with 1 message
bce1@pci0:6:0:0: class=0x020000 card=0x02231028 chip=0x164c14e4 rev=0x12 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'Broadcom NetXtreme II Gigabit Ethernet Adapter (BCM5708)'
class = network
subclass = ethernet
bar [10] = type Memory, range 64, base 0xe8000000, size 33554432, enabled
cap 07[40] = PCI-X 64-bit supports 133MHz, 512 burst read, 8 split transactions
cap 01[48] = powerspec 2 supports D0 D3 current D0
cap 03[50] = VPD
cap 05[58] = MSI supports 1 message, 64 bit enabled with 1 message
bce2@pci0:8:0:0: class=0x020000 card=0x1f121028 chip=0x164c14e4 rev=0x12 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'Broadcom NetXtreme II Gigabit Ethernet Adapter (BCM5708)'
class = network
subclass = ethernet
bar [10] = type Memory, range 64, base 0xea000000, size 33554432, enabled
cap 07[40] = PCI-X 64-bit supports 133MHz, 512 burst read, 8 split transactions
cap 01[48] = powerspec 2 supports D0 D3 current D0
cap 03[50] = VPD
cap 05[58] = MSI supports 1 message, 64 bit enabled with 1 message
bce3@pci0:10:0:0: class=0x020000 card=0x1f121028 chip=0x164c14e4 rev=0x12 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'Broadcom NetXtreme II Gigabit Ethernet Adapter (BCM5708)'
class = network
subclass = ethernet
bar [10] = type Memory, range 64, base 0xec000000, size 33554432, enabled
cap 07[40] = PCI-X 64-bit supports 133MHz, 512 burst read, 8 split transactions
cap 01[48] = powerspec 2 supports D0 D3 current D0
cap 03[50] = VPD
cap 05[58] = MSI supports 1 message, 64 bit enabled with 1 message
--
Ian Freislich
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E1Nne0Q-0003uZ-OR>