Date: Sat, 18 Jan 2003 03:30:08 -0800 (PST) From: Mark Hannon <markhannon@optusnet.com.au> To: freebsd-bugs@FreeBSD.org Subject: Re: bin/47140: 5.0 with rc_ng and nis hangs at startup Message-ID: <200301181130.h0IBU8bs048036@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR bin/47140; it has been noted by GNATS.
From: Mark Hannon <markhannon@optusnet.com.au>
To: Mike Makonnen <mtm@identd.net>
Cc: FreeBSD-gnats-submit@FreeBSD.ORG
Subject: Re: bin/47140: 5.0 with rc_ng and nis hangs at startup
Date: Sat, 18 Jan 2003 22:28:52 +1100
This is a multi-part message in MIME format.
--------------090408080900010409030501
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Mike Makonnen wrote:
>Please put rc_debug=yes
>in your rc.conf, reboot and send me the resulting output from the system log or
>copy and paste from console.
>
>Cheers.
>
>
Hi Mike,
Here are two files, one with the old rc system and one with the new. In
the new
case the system hangs after printing the line:
/etc/rc.d/ipfilter: DEBUG: checkyesno: ipfilter_enable is set to NO.
Control-C allows the boot to proceed.
Regards/Mark
--------------090408080900010409030501
Content-Type: text/plain;
name="old_rc"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="old_rc"
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #2: Thu Jan 16 18:13:51 EST 2003
mark@tbird.home.lan:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc06e7000.
Preloaded elf module "/boot/kernel/snd_emu10k1.ko" at 0xc06e70a8.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc06e7158.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06e7204.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1210786505 Hz
CPU: AMD Athlon(tm) Processor (1210.79-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
real memory = 268353536 (255 MB)
avail memory = 253276160 (241 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS A7V-E > on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
Using $PIR table, 9 entries at 0xc00f1690
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem 0xfc000000-0xfdffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xd800-0xd80f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 9 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub0: port error, restarting port 1
uhub0: port error, giving up port 1
uhub0: port error, restarting port 2
uhub0: port error, giving up port 2
uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 9 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub1: port error, restarting port 1
uhub1: port error, giving up port 1
uhub1: port error, restarting port 2
uhub1: port error, giving up port 2
rl0: <RealTek 8139 10/100BaseTX> port 0xa400-0xa4ff mem 0xed800000-0xed8000ff irq 9 at device 11.0 on pci0
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode
rl0: Ethernet address: 00:20:18:8d:b0:25
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcm0: <Creative EMU10K1> port 0xa000-0xa01f irq 10 at device 15.0 on pci0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: CPU throttling available, 16 steps from 100% to 6.2%
ad0: 38172MB <QUANTUM FIREBALLlct20 40> [77557/16/63] at ata0-master UDMA100
acd0: DVD-ROM <Pioneer DVD-ROM ATAPIModel DVD-116 0109> at ata1-master PIO4
acd1: CD-RW <RICOH CD-R/RW MP7083A> at ata1-slave PIO4
MBREXT Slice 5 on ad0s2:
[0] f:00 typ:11 s(CHS):218/1/129 e(CHS):255/254/255 s:63 l:54990432
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
Mounting root from ufs:/dev/ad0s3a
Entropy harvesting:
interrupts
ethernet
point_to_point
.
lock order reversal
1st 0xc267fb18 process lock (process lock) @ /usr/src/sys/kern/kern_descrip.c:2100
2nd 0xc2703434 filedesc structure (filedesc structure) @ /usr/src/sys/kern/kern_descrip.c:2107
swapon: adding /dev/ad0s3b as swap device
Automatic boot in progress...
/dev/ad0s3a: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s3a: clean, 95213 free (205 frags, 11876 blocks, 0.2% fragmentation)
/dev/ad0s3e: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s3e: clean, 128899 free (75 frags, 16103 blocks, 0.1% fragmentation)
/dev/ad0s3f: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s3f: clean, 1126417 free (28617 frags, 137225 blocks, 1.3% fragmentation)
/dev/ad0s3d: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s3d: clean, 123592 free (1200 frags, 15299 blocks, 0.9% fragmentation)
Doing initial network setup:
host.conf
hostname
domain
.
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::220:18ff:fe8d:b025%rl0 prefixlen 64 scopeid 0x1
inet 192.168.1.5 netmask 0xffffff00 broadcast 192.168.1.255
ether 00:20:18:8d:b0:25
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet 127.0.0.1 netmask 0xff000000
Additional routing options:
.
Routing daemons:
.
Mounting NFS filesystem:
.
Additional daemons:
syslogd
Jan 18 20:56:40 tbird syslogd: kernel boot file is /boot/kernel/kernel
.
Doing additional network setup:
rpcbind
ypbind
.
Starting final network daemons:
NFS access cache time=2
rpc.statd
rpc.lockd
.
ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout
Starting standard daemons:
cron
sshd
usbd
sendmail
sendmail-clientmqueue
.
Initial rc.i386 initialization:
.
Configuring syscons:
blanktime
.
Additional ABI support:
linux
.
Local package initialization:
xfs
gdm
.
Additional TCP options:
.
Starting background file system checks in 60 seconds.
Sat Jan 18 20:56:45 EST 2003
acquiring duplicate lock of same type: "system map"
1st system map @ /usr/src/sys/vm/vm_map.c:2168
2nd system map @ /usr/src/sys/vm/vm_kern.c:325
cd9660: RockRidge Extension
Jan 18 21:10:06 tbird kernel: cd9660: RockRidge Extension
Jan 18 21:43:18 tbird su: mark to root on /dev/ttyp0
Jan 18 21:50:30 tbird su: BAD SU mark to root on /dev/ttyp0
--------------090408080900010409030501
Content-Type: text/plain;
name="new_rc"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="new_rc"
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #2: Thu Jan 16 18:13:51 EST 2003
mark@tbird.home.lan:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc06e7000.
Preloaded elf module "/boot/kernel/snd_emu10k1.ko" at 0xc06e70a8.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc06e7158.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06e7204.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1210786757 Hz
CPU: AMD Athlon(tm) Processor (1210.79-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
real memory = 268353536 (255 MB)
avail memory = 253276160 (241 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS A7V-E > on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
Using $PIR table, 9 entries at 0xc00f1690
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem 0xfc000000-0xfdffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xd800-0xd80f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 9 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub0: port error, restarting port 1
uhub0: port error, giving up port 1
uhub0: port error, restarting port 2
uhub0: port error, giving up port 2
uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 9 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub1: port error, restarting port 1
uhub1: port error, giving up port 1
uhub1: port error, restarting port 2
uhub1: port error, giving up port 2
rl0: <RealTek 8139 10/100BaseTX> port 0xa400-0xa4ff mem 0xed800000-0xed8000ff irq 9 at device 11.0 on pci0
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode
rl0: Ethernet address: 00:20:18:8d:b0:25
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcm0: <Creative EMU10K1> port 0xa000-0xa01f irq 10 at device 15.0 on pci0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: CPU throttling available, 16 steps from 100% to 6.2%
ad0: 38172MB <QUANTUM FIREBALLlct20 40> [77557/16/63] at ata0-master UDMA100
acd0: DVD-ROM <Pioneer DVD-ROM ATAPIModel DVD-116 0109> at ata1-master PIO4
acd1: CD-RW <RICOH CD-R/RW MP7083A> at ata1-slave PIO4
MBREXT Slice 5 on ad0s2:
[0] f:00 typ:11 s(CHS):218/1/129 e(CHS):255/254/255 s:63 l:54990432
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
Mounting root from ufs:/dev/ad0s3a
Loading configuration files.
/etc/rc: DEBUG: checkyesno: devd_enable is set to NO.
/etc/rc: DEBUG: checkyesno: devd_enable is set to NO.
hw.bus.devctl_disable:
0
->
1
/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
Entropy harvesting:
/etc/rc: DEBUG: checkyesno: harvest_interrupt is set to YES.
interrupts
/etc/rc: DEBUG: checkyesno: harvest_ethernet is set to YES.
ethernet
/etc/rc: DEBUG: checkyesno: harvest_p_to_p is set to YES.
point_to_point
.
lock order reversal
1st 0xc2707068 process lock (process lock) @ /usr/src/sys/kern/kern_descrip.c:2100
2nd 0xc2703034 filedesc structure (filedesc structure) @ /usr/src/sys/kern/kern_descrip.c:2107
/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
/etc/rc: DEBUG: checkyesno: start_vinum is set to NO.
/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
swapon: adding /dev/ad0s3b as swap device
/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
Starting file system checks:
/etc/rc: DEBUG: checkyesno: background_fsck is set to YES.
/dev/ad0s3a: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s3a: clean, 95213 free (205 frags, 11876 blocks, 0.2% fragmentation)
/dev/ad0s3e: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s3e: clean, 128898 free (74 frags, 16103 blocks, 0.1% fragmentation)
/dev/ad0s3f: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s3f: clean, 1126417 free (28633 frags, 137223 blocks, 1.3% fragmentation)
/dev/ad0s3d: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s3d: clean, 123636 free (1212 frags, 15303 blocks, 0.9% fragmentation)
/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
/etc/rc: DEBUG: checkyesno: atm_enable is set to NO.
/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
/etc/rc: DEBUG: checkyesno: ipsec_enable is set to NO.
/etc/rc: DEBUG: checkyesno: ipfilter_enable is set to NO.
/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
/etc/rc: DEBUG: checkyesno: pccard_enable is set to NO.
/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
Doing initial network setup:
host.conf
hostname
domain
.
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::220:18ff:fe8d:b025%rl0 prefixlen 64 scopeid 0x1
inet 192.168.1.5 netmask 0xffffff00 broadcast 192.168.1.255
ether 00:20:18:8d:b0:25
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet 127.0.0.1 netmask 0xff000000
/etc/rc.d/ipfilter: DEBUG: checkyesno: ipfilter_enable is set to NO.
/etc/rc: DEBUG: checkyesno: firewall_enable is set to NO.
/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
Additional routing options:
.
/etc/rc: DEBUG: checkyesno: ipv6_firewall_enable is set to NO.
/etc/rc: DEBUG: checkyesno: ipv6_enable is set to NO.
/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
Mounting NFS file systems:
.
/etc/rc: DEBUG: checkyesno: lomac_enable is set to NO.
/etc/rc: DEBUG: checkyesno: syslogd_enable is set to YES.
/etc/rc: DEBUG: checkyesno: named_enable is set to NO.
Starting syslogd.
/etc/rc: DEBUG: run_rc_command: _doit: /usr/sbin/syslogd -s
Jan 18 22:22:32 tbird syslogd: kernel boot file is /boot/kernel/kernel
/etc/rc: DEBUG: checkyesno: ipmon_enable is set to NO.
/etc/rc: DEBUG: checkyesno: isdn_enable is set to NO.
/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
/etc/rc: DEBUG: No dump device. Quitting.
/etc/rc: DEBUG: checkyesno: named_enable is set to NO.
/etc/rc: DEBUG: checkyesno: ntpdate_enable is set to NO.
/etc/rc: DEBUG: checkyesno: rpcbind_enable is set to YES.
Starting rpcbind.
/etc/rc: DEBUG: run_rc_command: _doit: /usr/sbin/rpcbind
/etc/rc: DEBUG: checkyesno: nis_ypxfrd_enable is set to NO.
/etc/rc: DEBUG: checkyesno: nis_server_enable is set to NO.
/etc/rc: DEBUG: checkyesno: rpc_ypupdated_enable is set to NO.
/etc/rc: DEBUG: checkyesno: nis_client_enable is set to YES.
/etc/rc: DEBUG: checkyesno: rpcbind_enable is set to YES.
Starting ypbind.
/etc/rc: DEBUG: run_rc_command: _doit: /usr/sbin/ypbind
/etc/rc: DEBUG: checkyesno: nis_ypset_enable is set to NO.
/etc/rc: DEBUG: checkyesno: nis_yppasswdd_enable is set to NO.
/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
/etc/rc: DEBUG: checkyesno: accounting_enable is set to NO.
/etc/rc: DEBUG: checkyesno: nfs_client_enable is set to YES.
/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
NFS access cache time=2
/etc/rc: DEBUG: checkyesno: amd_enable is set to NO.
/etc/rc: DEBUG: checkyesno: clear_tmp_enable is set to NO.
/etc/rc: DEBUG: checkyesno: dmesg_enable is set to YES.
/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
/etc/rc: DEBUG: checkyesno: ipnat_enable is set to NO.
/etc/rc: DEBUG: checkyesno: ipxrouted_enable is set to NO.
/etc/rc: DEBUG: checkyesno: kerberos_stash is set to NO.
/etc/rc: DEBUG: checkyesno: kerberos4_server_enable is set to NO.
/etc/rc: DEBUG: checkyesno: kerberos5_server_enable is set to NO.
/etc/rc: DEBUG: checkyesno: kerberos_stash is set to NO.
/etc/rc: DEBUG: checkyesno: kadmind4_server_enable is set to NO.
/etc/rc: DEBUG: checkyesno: kadmind5_server_enable is set to NO.
/etc/rc: DEBUG: checkyesno: keyserv_enable is set to NO.
/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
/etc/rc: DEBUG: checkyesno: ldconfig_insecure is set to NO.
ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout
/etc/rc: DEBUG: checkyesno: enable_quotas is set to NO.
/etc/rc: DEBUG: checkyesno: nfs_server_enable is set to NO.
/etc/rc: DEBUG: checkyesno: mountd_enable is set to NO.
/etc/rc: DEBUG: checkyesno: nfs_server_enable is set to NO.
/etc/rc: DEBUG: checkyesno: rpc_statd_enable is set to YES.
/etc/rc: DEBUG: checkyesno: nfs_server_enable is set to NO.
/etc/rc: DEBUG: checkyesno: nfs_client_enable is set to YES.
Starting statd.
/etc/rc: DEBUG: run_rc_command: _doit: /usr/sbin/rpc.statd
/etc/rc: DEBUG: checkyesno: rpc_lockd_enable is set to YES.
/etc/rc: DEBUG: checkyesno: nfs_server_enable is set to NO.
/etc/rc: DEBUG: checkyesno: nfs_client_enable is set to YES.
Starting lockd.
/etc/rc: DEBUG: run_rc_command: _doit: /usr/sbin/rpc.lockd
/etc/rc: DEBUG: checkyesno: pppoed_enable is set to NO.
/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
/etc/rc: DEBUG: checkyesno: usbd_enable is set to YES.
Starting usbd.
/etc/rc: DEBUG: run_rc_command: _doit: /usr/sbin/usbd
/etc/rc: DEBUG: checkyesno: timed_enable is set to NO.
/etc/rc: DEBUG: checkyesno: apm_enable is set to NO.
/etc/rc: DEBUG: checkyesno: apmd_enable is set to NO.
/etc/rc: DEBUG: checkyesno: bootparamd_enable is set to NO.
/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
Starting local daemons:
.
/etc/rc: DEBUG: checkyesno: lpd_enable is set to NO.
/etc/rc: DEBUG: checkyesno: update_motd is set to YES.
/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
Updating motd.
/etc/rc: DEBUG: checkyesno: mroute6d_enable is set to NO.
/etc/rc: DEBUG: checkyesno: mrouted_enable is set to NO.
/etc/rc: DEBUG: checkyesno: ntpd_enable is set to NO.
/etc/rc: DEBUG: checkyesno: rarpd_enable is set to NO.
/etc/rc: DEBUG: checkyesno: ipv6_router_enable is set to NO.
/etc/rc: DEBUG: checkyesno: router_enable is set to NO.
/etc/rc: DEBUG: checkyesno: rtadvd_enable is set to NO.
/etc/rc: DEBUG: checkyesno: rwhod_enable is set to NO.
/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
Configuring syscons:
blanktime
.
/etc/rc: DEBUG: checkyesno: sshd_enable is set to YES.
Starting sshd.
/etc/rc: DEBUG: run_rc_command: _doit: /usr/sbin/sshd
/etc/rc: DEBUG: checkyesno: sendmail_enable is set to YES.
Starting sendmail.
/etc/rc: DEBUG: run_rc_command: _doit: /usr/sbin/sendmail -L sm-mta -bd -q30m
/etc/rc: DEBUG: checkyesno: sendmail_enable is set to YES.
/etc/rc: DEBUG: checkyesno: sendmail_outbound_enable is set to YES.
/etc/rc: DEBUG: checkyesno: sendmail_msp_queue_enable is set to YES.
/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
Initial i386 initialization:
/etc/rc: DEBUG: checkyesno: ibcs2_enable is set to NO.
/etc/rc: DEBUG: checkyesno: xtend_enable is set to NO.
.
Additional ABI support:
/etc/rc: DEBUG: checkyesno: sysvipc_enable is set to NO.
/etc/rc: DEBUG: checkyesno: linux_enable is set to YES.
/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
linux
/etc/rc: DEBUG: checkyesno: svr4_enable is set to NO.
.
/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
Local package initialization:
xfs
gdm
.
Additional TCP options:
.
/etc/rc: DEBUG: checkyesno: moused_enable is set to NO.
/etc/rc: DEBUG: checkyesno: inetd_enable is set to NO.
/etc/rc: DEBUG: checkyesno: cron_enable is set to YES.
Starting cron.
/etc/rc: DEBUG: run_rc_command: _doit: /usr/sbin/cron
/etc/rc: DEBUG: checkyesno: background_fsck is set to YES.
/etc/rc: DEBUG: run_rc_command: using XXX_cmd functions.
Starting background file system checks in 60 seconds.
Sat Jan 18 22:22:38 EST 2003
--------------090408080900010409030501--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200301181130.h0IBU8bs048036>