Date: Thu, 4 Sep 2003 00:41:55 +0200 (CEST) From: Lukas Ertl <l.ertl@univie.ac.at> To: FreeBSD-gnats-submit@FreeBSD.org Subject: kern/56384: ACPI problems on Thinkpad T20 Message-ID: <200309032241.h83Mft1d001161@korben.in.tern> Resent-Message-ID: <200309032250.h83MoFRt056600@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 56384 >Category: kern >Synopsis: ACPI problems on Thinkpad T20 >Confidential: no >Severity: non-critical >Priority: medium >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Wed Sep 03 15:50:14 PDT 2003 >Closed-Date: >Last-Modified: >Originator: Lukas Ertl >Release: FreeBSD 5.1-CURRENT i386 >Organization: Vienna University Computer Center >Environment: System: FreeBSD korben 5.1-CURRENT FreeBSD 5.1-CURRENT #15: Mon Sep 1 20:02:06 CEST 2003 le@korben:/usr/obj/usr/src/sys/KORBEN i386 IBM Thinkpad T20 (Model 2647-44G). >Description: Although I think that ACPI on the T20 is hopeless, I'm filing this PR so that someone who is really bored on a rainy sunday might have a look. :-) So far I have identified the following problems: *) lidswitch with hw.acpi.lid_switch_state=S3 turns off screen, fan, and harddisk, but the Power LED is still on. The little Thinkpad Sleep LED is off, so I suppose that the machine did not really suspend. This only works for the first time I close the lid. If I resume and then close the lid again, it does nothing. After resume, moused is locked and needs a kill -HUP. *) acpiconf -s 3 basically shows the same behaviour as closing the lid: On first invocation, it turns off everything except the power :-), and moused needs a kick in the pants. On subsequent invocations, the screen is turned off, but everything comes back alive after a few seconds. I haven't investigated standby (S1) or soft-power-off (S5). DSDT and ASL files are produced with "acpidump -t -d -o my.dsdt > my.asl" and can be found at: <http://mailbox.univie.ac.at/~le/acpi/thinkpad.dsdt>; <http://mailbox.univie.ac.at/~le/acpi/thinkpad.asl>; Attached is the dmesg of a vebose boot, it can also be found at <http://mailbox.univie.ac.at/~le/acpi/dmesg.verbose>. Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #15: Mon Sep 1 20:02:06 CEST 2003 le@korben:/usr/obj/usr/src/sys/KORBEN Preloaded elf kernel "/boot/kernel/kernel" at 0xc059e000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc059e200. Preloaded elf module "/boot/kernel/ng_ubt.ko" at 0xc059e250. Preloaded elf module "/boot/kernel/netgraph.ko" at 0xc059e2fc. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc059e3ac. Calibrating clock(s) ... i8254 clock: 1193174 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 148346760 Hz CPU: Intel Pentium III (148.35-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 268369920 (255 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x00000000005c5000 - 0x000000000fb49fff, 257445888 bytes (62853 pages) avail memory = 254541824 (242 MB) bios32: Found BIOS32 Service Directory header at 0xc00f71f0 bios32: Entry = 0xfd820 (c00fd820) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd7b0+0x19f pnpbios: Found PnP BIOS data at 0xc00f7220 pnpbios: Entry = f0000:b1fc Rev = 1.0 pnpbios: Event flag at 4b4 Other BIOS signatures found: wlan: <802.11 Link Layer> null: <null device, zero device> mem: <memory & I/O> Pentium Pro MTRR support enabled random: <entropy source> ath_hal: <Atheros Hardware Access Layer>version 0.9.5.2 npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <PTLTD RSDT > on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) pcibios: BIOS version 2.10 Using $PIR table, 11 entries at 0xc00fdee0 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 7 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 7 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 7 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 7 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 1 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 1 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 2 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 2 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 5 A 0x60 3 4 5 6 7 9 10 11 12 14 15 slot 1 0 3 A 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 1 0 3 B 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 4 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 4 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 4 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 4 D 0x63 3 4 5 6 7 9 10 11 12 14 15 slot 2 8 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 slot 2 8 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15 slot 2 8 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 2 8 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 8 1 A 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 8 2 A 0x62 3 4 5 6 7 9 10 11 12 14 15 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 7 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 0 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 7 func 3 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 2 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 2 func 1 acpi0: power button is handled as a fixed feature programming model. ACPI timer looks BAD min = 2, max = 7, width = 5 ACPI timer looks BAD min = 2, max = 7, width = 5 ACPI timer looks BAD min = 2, max = 7, width = 5 ACPI timer looks BAD min = 2, max = 7, width = 5 ACPI timer looks BAD min = 2, max = 7, width = 5 ACPI timer looks BAD min = 2, max = 7, width = 5 ACPI timer looks BAD min = 2, max = 7, width = 5 ACPI timer looks BAD min = 2, max = 7, width = 5 ACPI timer looks BAD min = 2, max = 7, width = 5 ACPI timer looks BAD min = 2, max = 7, width = 5 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) acpi_tz0: <thermal zone> port 0x530-0x537 on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.1.0 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.2.0 \\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.2.1 \\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.3.0 \\_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.3.1 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.5.0 \\_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.7.3 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.1.0 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.2.0 \\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.2.1 \\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.3.0 \\_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.3.1 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.5.0 \\_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.7.3 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base f8000000, size 26, enabled found-> vendor=0x8086, dev=0x7190, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7191, revid=0x03 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x001f, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x80 (3840 ns), mingnt=0x8c (35000 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base 50000000, size 12, enabled pcib0: matched entry for 0.2.INTA (source \\_SB_.LNKA) pcib0: slot 2 INTA is routed to irq 11 found-> vendor=0x104c, dev=0xac1b, revid=0x03 bus=0, slot=2, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 50100000, size 12, enabled pcib0: matched entry for 0.2.INTB (source \\_SB_.LNKB) pcib0: slot 2 INTB is routed to irq 11 found-> vendor=0x104c, dev=0xac1b, revid=0x03 bus=0, slot=2, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns) intpin=b, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base e8120000, size 12, enabled map[14]: type 4, range 32, base 00001800, size 6, enabled map[18]: type 1, range 32, base e8100000, size 17, enabled pcib0: matched entry for 0.3.INTA (source \\_SB_.LNKC) pcib0: slot 3 INTA is routed to irq 11 found-> vendor=0x8086, dev=0x1229, revid=0x09 bus=0, slot=3, func=0 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 00001840, size 3, enabled map[14]: type 1, range 32, base e8121000, size 12, enabled pcib0: matched entry for 0.3.INTA (source \\_SB_.LNKC) pcib0: slot 3 INTA is routed to irq 11 found-> vendor=0x115d, dev=0x000c, revid=0x00 bus=0, slot=3, func=1 class=07-00-02, hdrtype=0x00, mfdev=1 cmdreg=0x0003, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base e8122000, size 12, enabled map[14]: type 1, range 32, base e8000000, size 20, enabled pcib0: matched entry for 0.5.INTA (source \\_SB_.LNKA) pcib0: slot 5 INTA is routed to irq 11 found-> vendor=0x1013, dev=0x6003, revid=0x01 bus=0, slot=5, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0410, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x18 (6000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 found-> vendor=0x8086, dev=0x7110, revid=0x02 bus=0, slot=7, func=0 class=06-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00001850, size 4, enabled found-> vendor=0x8086, dev=0x7111, revid=0x01 bus=0, slot=7, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00001860, size 5, enabled pcib0: matched entry for 0.7.INTD (source \\_SB_.LNKD) pcib0: slot 7 INTD is routed to irq 11 found-> vendor=0x8086, dev=0x7112, revid=0x01 bus=0, slot=7, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 map[90]: type 4, range 32, base 00001040, size 4, enabled found-> vendor=0x8086, dev=0x7113, revid=0x03 bus=0, slot=7, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 agp0: allocating GATT for aperture of size 64M pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xf0000000-0xf7ffffff pcib1: prefetched decode 0xfff00000-0xfffff ---- initial configuration ------------------------ \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 1.0.0 \\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 1.0.1 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 1.0.0 \\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 1.0.1 pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 1, range 32, base f0000000, size 27, enabled pcib1: matched entry for 1.0.INTA (source \\_SB_.LNKA) pcib1: slot 0 INTA is routed to irq 11 found-> vendor=0x5333, dev=0x8c12, revid=0x11 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0xff (63750 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 pci1: <display, VGA> at device 0.0 (no driver attached) cbb0: <TI1450 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at device 2.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: PCI Configuration space: 0x00: 0xac1b104c 0x02100007 0x06070003 0x00824008 0x10: 0x50000000 0x020000a0 0xb0040200 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc 0x30: 0x00000000 0x0000fffc 0x00000000 0x0740010b 0x40: 0x01301014 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x0844d079 0x00000000 0x80018080 0x00001000 0x90: 0x406602c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe110001 0x00c00000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 cbb1: <TI1450 PCI-CardBus Bridge> mem 0x50100000-0x50100fff irq 11 at device 2.1 on pci0 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb1: PCI Configuration space: 0x00: 0xac1b104c 0x02100007 0x06070003 0x00824008 0x10: 0x50100000 0x020000a0 0xb0070500 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc 0x30: 0x00000000 0x0000fffc 0x00000000 0x0740020b 0x40: 0x01301014 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x0844f079 0x00000000 0x80018080 0x00001000 0x90: 0x406602c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe110001 0x00c00000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 fxp0: <Intel 82559ER Pro/100 Ethernet> port 0x1800-0x183f mem 0xe8100000-0xe811ffff,0xe8120000-0xe8120fff irq 11 at device 3.0 on pci0 fxp0: using memory space register mapping fxp0: Ethernet address 00:02:b3:04:8d:3b fxp0: PCI IDs: 8086 1229 8086 2408 0009 fxp0: Dynamic Standby mode is disabled miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached pci0: <simple comms, UART> at device 3.1 (no driver attached) csa0: <CS4280/CS4614/CS4622/CS4624/CS4630> mem 0xe8000000-0xe80fffff,0xe8122000-0xe8122fff irq 11 at device 5.0 on pci0 csa: card is Thinkpad 600X/A20/T20 pcm0: <CS461x PCM Audio> on csa0 pcm0: <Cirrus Logic CS4297A AC97 Codec (id = 0x43525914)> pcm0: Codec features headphone, 20 bit DAC, 18 bit ADC, 6 bit master volume, Crystal Semi 3D Stereo Enhancement pcm0: Primary codec extended features AMAP pcm0: sndbuf_setmap 718000, 1000; 0xc2604000 -> 718000 pcm0: sndbuf_setmap 756000, 1000; 0xc2602000 -> 756000 PCI-ISA bridge with incorrect subclass 0x80 PCI-ISA bridge with incorrect subclass 0x80 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0x1850-0x185f at device 7.1 on pci0 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: reset tp3 devices=0x1<ATA_MASTER> ata0: at 0x1f0 irq 14 on atapci0 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x04 lsb=0x04 msb=0x04 ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ata1: reset tp3 devices=0x4<ATAPI_MASTER> ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1860-0x187f irq 11 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached) unknown: not probed (disabled) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) unknown: not probed (disabled) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x54ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: unable to allocate IRQ psmcpnp0 irq 12 on acpi0 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0x1 0x1 0x1 0x1 sio0: probe failed test(s): 1 4 6 9 ppc0: using extended I/O port range unknown: not probed (disabled) sio0: irq maps: 0x1 0x1 0x1 0x1 sio0: probe failed test(s): 1 4 6 9 acpi_ec0: <embedded controller: GPE 0x9, GLK> port 0x66,0x62 on acpi0 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) acpi_ec0: info: new max delay is 1 us acpi_ec0: info: new max delay is 4 us acpi_ec0: info: new max delay is 5 us acpi_ec0: info: new max delay is 6 us acpi_ec0: info: new max delay is 20 us acpi_ec0: info: new max delay is 30 us mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) acpi_ec0: info: new max delay is 35 us acpi_ec0: info: new max delay is 45 us mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) acpi_cmbat0: <Control method Battery> on acpi0 acpi_cmbat1: <Control method Battery> on acpi0 acpi_acad0: <AC adapter> on acpi0 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) unknown: not probed (disabled) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) unknown: not probed (disabled) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0x41 0x41 0x41 0x41 sio0: probe failed test(s): 1 4 6 9 ppc0: using extended I/O port range unknown: not probed (disabled) sio0: irq maps: 0x41 0x41 0x41 0x41 sio0: probe failed test(s): 1 4 6 9 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xcc000-0xcd7ff,0xc0000-0xcbfff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) ppc0: parallel port not found. ppc0: <Parallel port> failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0x41 0x41 0x41 0x41 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x41 0x41 0x41 0x41 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 0e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 0e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 148346760 Hz quality 800 Timecounters tick every 10.000 msec lo0: bpf attached ata1: spurious interrupt - status=0x00 error=0x04 reason=0x00 acpi_cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% acpi_cmbat0: battery initialization start acpi_cmbat1: battery initialization start acpi_acad0: acline initialization start system power profile changed to 'economy' acpi_cpu0: set speed to 50.0% acpi_acad0: Off Line found-> vendor=0x168c, dev=0x0013, revid=0x01 bus=5, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0xa8 (5040 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 ath0: <Atheros 5212> mem 0x20000000-0x2000ffff irq 11 at device 0.0 on cardbus1 ath0: bpf attached ath0: bpf attached ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: 802.11 address: 00:09:5b:41:8d:ac acpi_cmbat0: battery initialization done, tried 1 times ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ad0: setting UDMA33 on Intel PIIX4 chip GEOM: create disk ad0 dp=0xc264fe70 ad0: <TOSHIBA MK6021GAS/GA024A> ATA-5 disk at ata0-master ad0: 57231MB (117210240 sectors), 116280 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA33 GEOM: new disk ad0 ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin acd0: setting UDMA33 on Intel PIIX4 chip acd0: <TOSHIBA DVD-ROM SD-C2302/1127> DVDROM drive at ata1 as master acd0: read 981KB/s (4134KB/s), 128KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR acd0: Writes: acd0: Audio: play, 16 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc [0] f:00 typ:12 s(CHS):0/1/1 e(CHS):1023/164/63 s:63 l:40960017 [1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:40960080 l:76250160 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 20971528704 end 20971560959 GEOM: Configure ad0s2, start 20971560960 length 39040081920 end 60011642879 GEOM: Configure ad0s2a, start 0 length 209715200 end 209715199 GEOM: Configure ad0s2b, start 209715200 length 536870912 end 746586111 GEOM: Configure ad0s2c, start 0 length 39040081920 end 39040081919 GEOM: Configure ad0s2d, start 746586112 length 1073741824 end 1820327935 GEOM: Configure ad0s2e, start 1820327936 length 1073741824 end 2894069759 GEOM: Configure ad0s2f, start 2894069760 length 10737418240 end 13631487999 Mounting root from ufs:/dev/ad0s2a start_init: trying /sbin/init Linux ELF exec handler installed acpi_cmbat1: battery initialization failed, giving up acpi_acad0: acline initialization done, tried 7 times >How-To-Repeat: >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200309032241.h83Mft1d001161>