Date: 20 Sep 1998 13:37:32 +0200 From: finrod@ewox.org (Dag-Erling Coidan Smørgrav) To: current@FreeBSD.ORG Subject: Strange CAM panics [LONG] Message-ID: <86d88raubn.fsf@niobe.ewox.org>
next in thread | raw e-mail | index | archive | help
After the CAM conversion, one of my boxes (built with sources from
1998/09/17) panics reliably every time I try to mount a CD-ROM. The
panic message is as follows:
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x18004a
fault code = supervisor read, page not present
instruction pointer = 0x8:0xf014fe86
stack pointer = 0x10:0xf7078d70
frame pointer = 0x10:0xf7078d88
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 150 (mountd)
interrupt mask =
trap number = 12
panic: page fault
syncing disks... 10 9 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 giving up
Automatic reboot in 15 seconds - press a key on the console to abort
--> Press a key on the console to reboot <--
The strange thing is that the panic always occurs in mountd, which I
wouldn't think was related.
The command I use to mount the CD-ROM is 'mount /cdrom', and the
corresponding line in my /etc/fstab looks like this:
/dev/cd0c /cdrom cd9660 ro,noauto 0 0
Another problem I have (which I think is softupdates related) is that
after a panic, the computer refuses to mount / even after 'fsck -p'.
After a second reboot, all file systems are reported clean and are
mounted properly. Here is a boot log:
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-CURRENT #26: Sun Sep 20 13:12:24 CEST 1998
root@niobe.ewox.org:/usr/src/sys/compile/niobe
Calibrating clock(s) ... TSC clock: 166193361 Hz, i8254 clock: 1193185 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz cost 2278 ns
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 166193740 Hz cost 137 ns
CPU: Pentium/P54C (166.19-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping=12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 134217728 (131072K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009ffff, 651264 bytes (159 pages)
0x00212000 - 0x07ff7fff, 132014080 bytes (32230 pages)
FreeBSD Kernel Configuration Utility - Version 1.1
Type "help" for help or "visual" to go to the visual
configuration interface (requires MGA/VGA display or
serial terminal capable of displaying ANSI graphics).
config> pnp 1 0 os enable port0 0x220 irq0 5 drq0 1 drq1 5
config> quit
avail memory = 128000000 (125000K bytes)
Found BIOS32 Service Directory header at 0xf00f8630
Entry = 0xf8080 (0xf00f8080) Rev = 0 Len = 1
PCI BIOS entry at 0x80b0
Other BIOS signatures found:
ACPI: 00000000
$PnP: 000fc730
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=12508086)
Probing for devices on PCI bus 0:
found-> vendor=0x8086, dev=0x1250, revid=0x03
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
chip0: <Intel 82439> rev 0x03 on pci0.0.0
found-> vendor=0x8086, dev=0x7000, revid=0x01
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0
I/O Recovery Timing: 8-bit 3.5 clocks, 16-bit 3.5 clocks
Extended BIOS: disabled
Lower BIOS: enabled
Coprocessor IRQ13: enabled
Mouse IRQ12: disabled
Interrupt Routing: A: IRQ11, B: IRQ12, C: IRQ9, D: IRQ15
MB0: disabled, MB1:
found-> vendor=0x8086, dev=0x7010, revid=0x00
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x1229, revid=0x02
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=15
map[0]: type 3, range 32, base fb800000, size 12
map[1]: type 4, range 32, base 0000e000, size 5
map[2]: type 1, range 32, base f9000000, size 20
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x02 int a irq 15 on pci0.9.0
fxp0: Ethernet address 00:a0:c9:4d:1b:d4
bpf: fxp0 attached
found-> vendor=0x100c, dev=0x3208, revid=0x70
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[0]: type 1, range 32, base f8000000, size 24
map[1]: type 4, range 32, base 0000d800, size 8
vga0: <Tseng Labs ET6000 graphics accelerator> rev 0x70 int a irq 9 on pci0.10.0
found-> vendor=0x9004, dev=0x8178, revid=0x00
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=12
map[0]: type 4, range 32, base 0000d400, size 8
map[1]: type 1, range 32, base f7800000, size 12
ahc0: <Adaptec 2940 Ultra SCSI adapter> rev 0x00 int a irq 12 on pci0.11.0
ahc0: Reading SEEPROM...done.
ahc0: internal 50 cable is present, internal 68 cable is present
ahc0: external cable not present
ahc0: BIOS eeprom is present
ahc0: High byte termination Enabled
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc0: Resetting Channel A
ahc0: Downloading Sequencer Program... 411 instructions downloaded
found-> vendor=0x9004, dev=0x7178, revid=0x00
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[0]: type 4, range 32, base 0000d000, size 8
map[1]: type 1, range 32, base f7000000, size 12
ahc1: <Adaptec 2940 SCSI adapter> rev 0x00 int a irq 11 on pci0.12.0
ahc1: Reading SEEPROM...done.
ahc1: High byte termination Enabled
ahc1: aic7870 Single Channel A, SCSI Id=7, 16/255 SCBs
ahc1: Downloading Sequencer Program... 409 instructions downloaded
Probing for PnP devices:
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
No Plug-n-Play devices were found
Probing for devices on the ISA bus:
video: RTC equip. code:0x0f, DCC code:0x89
video: CRTC:0x3d4, video option:0x60, rows:80, cols:25, font height:16
video: param table EGA/VGA:0xf00c572a, CGA/MDA:0
video: rows_offset:1
video#0: adapter type:VGA (5), flags:0x7f, CRTC:0x3d4
video#0: init mode:24, bios mode:3, current mode:24
video#0: window:0xf00b8000 size:32k gran:32k, buf:0xf0000000 size:32k
video#0: mode:0, flags:0x1 T 40x25, font:8x8, win:0xb8000
video#0: mode:1, flags:0x1 T 40x25, font:8x8, win:0xb8000
video#0: mode:2, flags:0x1 T 80x25, font:8x8, win:0xb8000
video#0: mode:3, flags:0x1 T 80x25, font:8x8, win:0xb8000
video#0: mode:19, flags:0x1 T 40x25, font:8x14, win:0xb8000
video#0: mode:20, flags:0x1 T 40x25, font:8x14, win:0xb8000
video#0: mode:21, flags:0x1 T 80x25, font:8x14, win:0xb8000
video#0: mode:22, flags:0x1 T 80x25, font:8x14, win:0xb8000
video#0: mode:23, flags:0x1 T 40x25, font:8x16, win:0xb8000
video#0: mode:25, flags:0x0 T 80x25, font:8x16, win:0xb0000
video#0: mode:24, flags:0x1 T 80x25, font:8x16, win:0xb8000
video#0: mode:7, flags:0x0 T 80x25, font:8x14, win:0xb0000
video#0: mode:112, flags:0x1 T 80x43, font:8x8, win:0xb8000
video#0: mode:113, flags:0x1 T 80x43, font:8x8, win:0xb8000
video#0: mode:33, flags:0x0 T 80x30, font:8x16, win:0xb0000
video#0: mode:32, flags:0x1 T 80x30, font:8x16, win:0xb8000
video#0: mode:31, flags:0x0 T 80x50, font:8x8, win:0xb0000
video#0: mode:30, flags:0x1 T 80x50, font:8x8, win:0xb8000
video#0: mode:35, flags:0x0 T 80x60, font:8x8, win:0xb0000
video#0: mode:34, flags:0x1 T 80x60, font:8x8, win:0xb8000
video#0: mode:4, flags:0x3 G 320x200x2, 1 plane(s), font:8x8, win:0xb8000
video#0: mode:5, flags:0x3 G 320x200x2, 1 plane(s), font:8x8, win:0xb8000
video#0: mode:6, flags:0x3 G 640x200x1, 1 plane(s), font:8x8, win:0xb8000
video#0: mode:13, flags:0x3 G 320x200x4, 4 plane(s), font:8x8, win:0xa0000
video#0: mode:14, flags:0x3 G 640x200x4, 4 plane(s), font:8x8, win:0xa0000
video#0: mode:15, flags:0x2 G 640x350x4, 4 plane(s), font:8x14, win:0xa0000
video#0: mode:17, flags:0x2 G 640x350x4, 4 plane(s), font:8x14, win:0xa0000
video#0: mode:16, flags:0x3 G 640x350x2, 2 plane(s), font:8x14, win:0xa0000
video#0: mode:18, flags:0x3 G 640x350x4, 4 plane(s), font:8x14, win:0xa0000
video#0: mode:26, flags:0x3 G 640x480x4, 4 plane(s), font:8x16, win:0xa0000
video#0: mode:27, flags:0x3 G 640x480x4, 4 plane(s), font:8x16, win:0xa0000
video#0: mode:28, flags:0x3 G 320x200x8, 1 plane(s), font:8x8, win:0xa0000
video#0: mode:37, flags:0x3 G 320x240x8, 1 plane(s), font:8x8, win:0xa0000
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: the current keyboard controller command byte 0065
kbdio: DIAGNOSE status:0055
kbdio: TEST_KBD_PORT status:0000
kbdio: RESET_KBD return code:00fa
kbdio: RESET_KBD status:00aa
sc0: keyboard device ID: ab41
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <12 virtual consoles, flags=0x0>
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
bpf: lp0 attached
mss_probe: no address supplied, try default 0x530
mss_detect error, busy still set (0xff)
sb_probe: no address supplied, try defaults (0x220,0x240)
pcm0 not found
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
npx0 on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 145815106 bytes/sec
bzero() bandwidth = 88074687 bytes/sec
imasks: bio c0080040, tty c003009a, net c0068000
BIOS Geometries:
0:0228fe3f 0..552=553 cylinders, 0..254=255 heads, 1..63=63 sectors
1:0312fe3f 0..786=787 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
Intel Pentium F00F detected, installing workaround
bpf: tun0 attached
bpf: tun1 attached
bpf: tun2 attached
bpf: tun3 attached
bpf: lo0 attached
IP packet filtering initialized, divert disabled, rule-based forwarding disabled, unlimited logging
(noperiph:ahc0:0:X:X): SCSI bus reset delivered. 0 SCBs aborted.
(noperiph:ahc1:0:X:X): SCSI bus reset delivered. 0 SCBs aborted.
ahc1: Selection Timeout on A:0. 1 SCBs aborted
ahc0: Selection Timeout on A:0. 1 SCBs aborted
ahc1: Selection Timeout on A:1. 1 SCBs aborted
ahc0: Selection Timeout on A:1. 1 SCBs aborted
ahc1: Selection Timeout on A:2. 1 SCBs aborted
ahc0: Selection Timeout on A:3. 1 SCBs aborted
ahc1: Selection Timeout on A:3. 1 SCBs aborted
(probe21:ahc1:0:6:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe21:ahc1:0:6:0): ILLEGAL REQUEST asc:24,0
(probe21:ahc1:0:6:0): Invalid field in CDB sks:cf,2
(probe20:ahc1:0:5:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe20:ahc1:0:ahc1: target 6 synchronous at 5.0MHz, offset = 0x8
5:0): ILLEGAL REQUEST asc:24,0
(probe20:ahc1: target 6 using asynchronous transfers
ahc1:0:5:0): Invalid field in CDB sks:c8,1
ahc1: target 6 synchronous at 5.0MHz, offset = 0x8
ahc1: target 5 synchronous at 10.0MHz, offset = 0x8
ahc1: target 5 using asynchronous transfers
ahc1: target 5 synchronous at 10.0MHz, offset = 0x8
ahc1: target 4 synchronous at 10.0MHz, offset = 0xf
ahc0: Selection Timeout on A:5. 1 SCBs aborted
ahc0: Selection Timeout on A:6. 1 SCBs aborted
ahc0: Selection Timeout on A:8. 1 SCBs aborted
ahc0: Selection Timeout on A:9. 1 SCBs aborted
ahc0: Selection Timeout on A:10. 1 SCBs aborted
ahc0: Selection Timeout on A:11. 1 SCBs aborted
ahc0: Selection Timeout on A:12. 1 SCBs aborted
ahc0: Selection Timeout on A:13. 1 SCBs aborted
ahc0: Selection Timeout on A:14. 1 SCBs aborted
ahc0: Selection Timeout on A:15. 1 SCBs aborted
ahc0: target 2 using 16bit transfers
ahc0: target 2 synchronous at 20.0MHz, offset = 0x8
ahc0: target 4 synchronous at 20.0MHz, offset = 0xf
pass0 at ahc0 bus 0 target 2 lun 0
pass0: <QUANTUM XP34550W LXY1> Fixed Direct Access SCahc1: target 6 using asynchronous transfers
SI2 device
pass0: Serial Number PCB=20113ahc1: target 6 synchronous at 5.0MHz, offset = 0x8
00001 ; HDA=184634612529
pass0: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled
pass1 at ahc0 bus 0 target 4 lun 0
pass1: <QUANTUM FIREBALL Sahc1: target 5 using asynchronous transfers
T6.4S 0F0C> Fixed Direcahc1: target 5 synchronous at 10.0MHz, offset = 0x8
t Access SCSI2 device
pass1: Serial Number 156711442301
pass1: 20.0MB/s transfers (20.0MHz, offset 15), Tagged Queueing Enabled
pass2 at ahc1 bus 0 target 4 lun 0
pass2: <CONNER CFP1080S 4649> Fixed Direct Access SCSI2 device
pass2: Serial Number EX9CSTC
pass2: 10.0MB/s transfers (10.0MHz, offset 15), Tagged Queueing Enabled
pass3 at ahc1 bus 0 target 5 lun 0
pass3: <TOSHIBA CD-ROM XM-3801TA 1047> Removable CD-ROM SCSI2 device
pass3: 10.0MB/s transfers (10.0MHz, offset 8)
pass4 at ahc1 bus 0 target 6 lun 0
pass4: <OLYMPUS MOS330 1.30> Removable Optical SCSI2 device
pass4: 5.0MB/s transfers (5.0MHz, offset 8)
da0 at ahc0 bus 0 target 2 lun 0
da0: <QUANTUM XP34550W LXY1> Fixed Direct Access SCSI2 device
da0: Serial Number PCB=2011300001 ; HDA=184634612529
da0: 40.0MB/s transfers (20.0MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 4341MB (8890760 512 byte sectors: 255H 63S/T 553C)
da1 at ahc0 bus 0 target 4 lun 0
da1: <QUANTUM FIREBALL ST6.4S 0F0C> Fixed Direct Access SCSI2 device
da1: Serial Number 156711442301
da1: 20.0MB/s transfers (20.0MHz, offset 15), Tagged Queueing Enabled
da1: 6180MB (12657717 512 byte sectors: 255H 63S/T 787C)
(da3:ahc1:0:6:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da3:ahc1:0:6:0): NOT READY asc:3a,0
(da3:ahc1:0:6:0): Medium not present
da3 at ahc1 bus 0 target 6 lun 0
da3: <OLYMPUS MOS330 1.30> Removable Optical SCSI2 device
da3: 5.0MB/s transfers (5.0MHz, offset 8)
da3: Attempt to query device size failed: NOT READY, Medium not present
da2 at ahc1 bus 0 target 4 lun 0
da2: <CONNER CFP1080S 4649> Fixed Direct Access SCSI2 device
da2: Serial Number EX9CSTC
da2: 10.0MB/s transfers (10.0MHz, offset 15), Tagged Queueing Enabled
da2: 1030MB (2110812 512 byte sectors: 255H 63S/T 131C)
Considering FFS root f/s.
changing root device to da0s1a
da0s1: type 0xa5, start 0, end = 8890759, size 8890760
da0s1: C/H/S end 553/108/11 (664245) != end 8890759: invalid
WARNING: / was not properly dismounted.
[**** log in as root, run 'fsck -p']
ahc1: target 5 using asynchronous transfers
ahc1: target 5 synchronous at 10.0MHz, offset = 0x8
ahc1: target 5 using asynchronous transfers
ahc1: target 5 synchronous at 10.0MHz, offset = 0x8
ahc1: target 5 using asynchronous transfers
ahc1: target 5 synchronous at 10.0MHz, offset = 0x8
ahc1: target 5 using asynchronous transfers
ahc1: target 5 synchronous at 10.0MHz, offset = 0x8
ahc1: target 5 using asynchronous transfers
ahc1: target 5 synchronous at 10.0MHz, offset = 0x8
ahc1: target 5 using asynchronous transfers
ahc1: target 5 synchronous at 10.0MHz, offset = 0x8
ahc1: target 5 using asynchronous transfers
ahc1: target 5 synchronous at 10.0MHz, offset = 0x8
ahc1: target 5 using asynchronous transfers
ahc1: target 5 synchronous at 10.0MHz, offset = 0x8
cd0 at ahc1 bus 0 target 5 lun 0
cd0: <TOSHIBA CD-ROM XM-3801TA 1047> Removable CD-ROM SCSI2 device
cd0: 10.0MB/s transfers (10.0MHz, offset 8)
cd0: cd present [323780 x 2048 byte records]
da2s1: type 0xa5, start 63, end = 2104514, size 2104452 : OK
ahc1: target 4 using asynchronous transfers
ahc1: target 4 synchronous at 10.0MHz, offset = 0xf
da2s1: type 0xa5, start 63, end = 2104514, size 2104452 : OK
ahc1: target 4 using asynchronous transfers
ahc1: target 4 synchronous at 10.0MHz, offset = 0xf
[*** try to 'mount -at ufs']
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck.
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck.
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck.
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck.
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck.
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck.
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck.
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck.
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck.
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck.
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck.
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck.
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck.
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck.
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck.
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck.
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck.
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck.
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck.
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck.
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck.
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck.
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck.
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck.
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck.
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck.
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck.
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck.
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck.
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck.
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck.
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck.
ffs_mountfs: superblock updated
ffs_mountfs: superblock updated
ffs_mountfs: superblock updated
ffs_mountfs: superblock updated
ffs_mountfs: superblock updated
ffs_mountfs: superblock updated
da2s1: type 0xa5, start 63, end = 2104514, size 2104452 : OK
ffs_mountfs: superblock updated
ffs_mountfs: superblock updated
After this, I reboot and everything comes up nice and clean. The
kernel config for this kernel follows:
#
# Kernel configuration for niobe.ewox.org
#
machine "i386"
cpu "I586_CPU"
ident niobe
maxusers 128
#
# Networking
options INET
options IPFIREWALL
options IPFIREWALL_VERBOSE
options "NMBCLUSTERS=4096"
#
# File system
options FDESC
options FFS
options FFS_ROOT
options PROCFS
options SOFTUPDATES
#
# XFree86 support
options SYSVMSG
options SYSVSEM
options SYSVSHM
options UCONSOLE
#
# Misc. kernel options
options "AUTO_EOI_1"
options "AUTO_EOI_2"
options "COMPAT_43"
options "MD5"
options BOUNCE_BUFFERS
options INCLUDE_CONFIG_FILE
options USERCONFIG
options USERCONFIG_BOOT
options VISUAL_USERCONFIG
#
config kernel root on da0
#
# Buses
controller isa0
controller pci0
controller pnp0
#
# Numeric processor extensions
device npx0 at isa? port "IO_NPX" irq 13 vector npxintr
#
# Floppy controller
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk fd0 at fdc0 drive 0
#
# EIDE controllers
#controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr
#disk wd0 at wdc0 drive 0 flags 0x80ff
#disk wd1 at wdc0 drive 1 flags 0x80ff
#controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr
#disk wd2 at wdc1 drive 0 flags 0x80ff
#disk wd3 at wdc1 drive 1 flags 0x80ff
#
# SCSI controllers
controller ahc0
controller scbus0
device pass0
device da0
device sa0
device cd0
options SCSI_DELAY=100
options SCSI_REPORT_GEOMETRY
#
# System console and mouse
device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr
options "MAXCONS=12"
options "SC_HISTORY_SIZE=4096"
options "MSGBUF_SIZE=32768"
#device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr
#
# I/O ports
device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 vector siointr
device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr
device lpt0 at isa? port? tty irq 7 vector lptintr
#
# Network adapters
#device de0
device fxp0
#
# Networking pseudo-devices
pseudo-device loop
pseudo-device ether
pseudo-device tun 4
pseudo-device bpfilter 4
#
# Other pseudo-devices
pseudo-device gzip
pseudo-device pty 64
pseudo-device vn 4
#
# Sound hardware (Luigi Rizzo)
device pcm0 at isa? port? tty irq 5 drq 1 flags 0x15 vector pcmintr
#
Here are the RCS Id strings of all files in /sys/cam and /sys/cam/scsi:
$Id: cam.c,v 1.1 1998/09/15 06:33:23 gibbs Exp $
$Id: cam.h,v 1.1 1998/09/15 06:33:23 gibbs Exp $
$Id: cam_ccb.h,v 1.1 1998/09/15 06:33:23 gibbs Exp $
$Id: cam_conf.h,v 1.1 1998/09/15 06:33:23 gibbs Exp $
$Id: cam_debug.h,v 1.1 1998/09/15 06:33:23 gibbs Exp $
$Id: cam_extend.c,v 1.1 1998/09/15 06:33:23 gibbs Exp $
$Id: cam_extend.h,v 1.1 1998/09/15 06:33:23 gibbs Exp $
$Id: cam_periph.c,v 1.1 1998/09/15 06:33:23 gibbs Exp $
$Id: cam_periph.h,v 1.1 1998/09/15 06:33:23 gibbs Exp $
$Id: cam_queue.c,v 1.1 1998/09/15 06:33:23 gibbs Exp $
$Id: cam_queue.h,v 1.1 1998/09/15 06:33:23 gibbs Exp $
$Id: cam_sim.c,v 1.1 1998/09/15 06:33:23 gibbs Exp $
$Id: cam_sim.h,v 1.1 1998/09/15 06:33:23 gibbs Exp $
$Id: cam_xpt.c,v 1.6 1998/09/17 23:58:53 ken Exp $
$Id: cam_xpt.h,v 1.1 1998/09/15 06:33:23 gibbs Exp $
$Id: cam_xpt_periph.h,v 1.1 1998/09/15 06:33:23 gibbs Exp $
$Id: cam_xpt_sim.h,v 1.1 1998/09/15 06:33:23 gibbs Exp $
$Id: scsi_all.c,v 1.1 1998/09/15 06:36:33 gibbs Exp $
$Id: scsi_all.h,v 1.1 1998/09/15 06:36:34 gibbs Exp $
$Id: scsi_cd.c,v 1.1 1998/09/15 06:36:34 gibbs Exp $
$Id: scsi_ch.c,v 1.1 1998/09/15 06:36:34 gibbs Exp $
$Id: scsi_da.c,v 1.2 1998/09/16 23:30:11 ken Exp $
$Id: scsi_da.h,v 1.1 1998/09/15 06:36:34 gibbs Exp $
$Id: scsi_pass.c,v 1.2 1998/09/16 00:11:53 ken Exp $
$Id: scsi_pass.h,v 1.1 1998/09/15 06:36:34 gibbs Exp $
$Id: scsi_pt.c,v 1.1 1998/09/15 06:36:34 gibbs Exp $
$Id: scsi_pt.h,v 1.1 1998/09/15 06:36:34 gibbs Exp $
$Id: scsi_sa.c,v 1.1 1998/09/15 06:36:34 gibbs Exp $
$Id: scsi_sa.h,v 1.1 1998/09/15 06:36:34 gibbs Exp $
$Id: scsi_target.c,v 1.2 1998/09/15 22:05:42 gibbs Exp $
$Id: scsi_targetio.h,v 1.1 1998/09/15 06:36:34 gibbs Exp $
DES
--
Dag-Erling Smørgrav - finrod@ewox.org
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?86d88raubn.fsf>