Date: Wed, 20 Oct 2004 16:42:40 +0200 From: Vitaliy Oliynyk <voliyny@gwdg.de> To: freebsd-bugs@freebsd.org Subject: problems booting FreeBSD 5.3-RC1 Message-ID: <200410201642.41108.voliyny@gwdg.de>
next in thread | raw e-mail | index | archive | help
--Boundary-00=_hlndBLymdT8RE0D Content-Type: text/plain; charset="koi8-r" Content-Transfer-Encoding: 7bit Content-Disposition: inline Hello! I have problems booting FreeBSD 5.3-RC1 mini-install CD (iso-file was downloaded from ftp://ftp.gwdg.de mirror). System freezes after this strings appears during "boot -v": ... ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: setting PIO4 on SiS 5513 chip ata0-master: DMA limited to UDMA33, non-ATA66 cable or device ata0-master: setting UDMA33 on SiS 5513 chip ad0: <FUJITSU MHS2020AT/8004> ATA-6 disk at ata0-master ad0: 19077MB (39070080 sectors), 38760 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA33 GEOM: new disk ad0 ar: FreeBSD check1 failed ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin ata1-master: setting PIO4 on SiS 5513 chip acd0: <QSI CD-RW/DVD-ROM SBW-161/SX14> CDRW drive at ata1 as master acd0: read 3050KB/s (4125KB/s) write 2068KB/s (2757KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 256 volume levels ... GEOM: Configure ad0s1, start 32256 length 2623832064 end 2623864319 GEOM: Configure ad0s2, start 2664990720 length 8694120960 end 11359111679 GEOM: Configure ad0s3, start 11359111680 length 8644769280 end 20003880959 ... GEOM: Configure ad0s5, start 32256 length 8694088704 end 8694120959 GEOM: Configure ad0s3a, start 0 length 536870912 end 536870911 GEOM: Configure ad0s3b, start 536870912 length 134217728 end 671088639 GEOM: Configure ad0s3c, start 0 length 8644769280 end 8644769279 GEOM: Configure ad0s3d, start 671088640 length 536870912 end 1207959551 GEOM: Configure ad0s3e, start 1207959552 length 7436809728 end 8644769279 And at this point it stops and it seems it does nothing. The similar problems I had with BETA6 and BETA7. I am attaching to files of dmesg for normal and verbose booting of my working system which is "FreeBSD vital.physik3.gwdg.de 5.2.1-RELEASE-p9 FreeBSD 5.2.1-RELEASE-p9 #0". Please tell me what additional info you want to have. Best regards, Vitaliy Oliynyk --Boundary-00=_hlndBLymdT8RE0D Content-Type: text/plain; charset="koi8-r"; name="dmesg-5.2.1" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dmesg-5.2.1" Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2.1-RELEASE-p9 #0: Thu Aug 12 16:02:22 CEST 2004 root@vital.biophysics.nbi.dk:/usr/src/sys/i386/compile/VITAL Preloaded elf kernel "/boot/kernel/kernel" at 0xc0c8a000. Preloaded elf module "/boot/kernel/linux.ko" at 0xc0c8a294. Preloaded elf module "/boot/modules/nvidia.ko" at 0xc0c8a340. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0c8a3ec. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Celeron(R) CPU 2.00GHz (1998.59-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> real memory = 536805376 (511 MB) avail memory = 507572224 (484 MB) Pentium Pro MTRR support enabled npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <AMIINT SiS645XX> on motherboard pcibios: BIOS version 2.10 Using $PIR table, 10 entries at 0xc00f7eb0 acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 acpi_cpu1: <CPU> port 0x530-0x537 on acpi0 device_probe_and_attach: acpi_cpu1 attach returned 6 acpi_button0: <Power Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: slot 2 INTB is routed to irq 5 pcib0: slot 2 INTC is routed to irq 10 pcib0: slot 2 INTC is routed to irq 10 pcib0: slot 3 INTA is routed to irq 10 pcib0: slot 3 INTB is routed to irq 10 pcib0: slot 3 INTC is routed to irq 10 pcib0: slot 3 INTD is routed to irq 10 pcib0: slot 4 INTA is routed to irq 11 agp0: <SIS Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.AGP_ - AE_NOT_FOUND pci1: <ACPI PCI bus> on pcib1 nvidia0: <GeForce4 420 Go 32M> mem 0xddb80000-0xddbfffff,0xd8000000-0xdbffffff,0xde000000-0xdeffffff irq 11 at device 0.0 on pci1 isab0: <PCI-ISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 fwohci0: vendor=1039, dev=7007 fwohci0: <1394 Open Host Controller Interface> mem 0xdffff000-0xdfffffff irq 5 at device 2.3 on pci0 fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 00:00:0a:e6:ff:03:7f:19 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset atapci0: <SiS 962/963 UDMA133 controller> port 0xff00-0xff0f at device 2.5 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: <simple comms> at device 2.6 (no driver attached) pcm0: <SiS 7012> port 0xd800-0xd87f,0xdc00-0xdcff irq 10 at device 2.7 on pci0 pcm0: <C-Media Electronics CMI9739 AC97 Codec> ohci0: <SiS 5571 USB controller> mem 0xdfffb000-0xdfffbfff irq 10 at device 3.0 on pci0 usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ohci1: <SiS 5571 USB controller> mem 0xdfffc000-0xdfffcfff irq 10 at device 3.1 on pci0 usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <SiS 5571 USB controller> on ohci1 usb1: USB revision 1.0 uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ums0: NOVATEK USB Mouse STD., rev 1.00/1.00, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. ohci2: <SiS 5571 USB controller> mem 0xdfffd000-0xdfffdfff irq 10 at device 3.2 on pci0 usb2: OHCI version 1.0, legacy support usb2: SMM does not respond, resetting usb2: <SiS 5571 USB controller> on ohci2 usb2: USB revision 1.0 uhub2: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 3.3 (no driver attached) sis0: <SiS 900 10/100BaseTX> port 0xcc00-0xccff mem 0xdfffa000-0xdfffafff irq 11 at device 4.0 on pci0 sis0: Ethernet address: 00:0a:e6:56:2f:ce miibus0: <MII bus> on sis0 rlphy0: <RTL8201L 10/100 media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 acpi_cpu1: <CPU> port 0x530-0x537 on acpi0 device_probe_and_attach: acpi_cpu1 attach returned 6 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 1998590832 Hz quality 800 Timecounters tick every 10.000 msec acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% ata0-master: DMA limited to UDMA33, non-ATA66 cable or device GEOM: create disk ad0 dp=0xc4c7fb60 ad0: 19077MB <FUJITSU MHS2020AT> [38760/16/63] at ata0-master UDMA33 acd0: CDRW <QSI CD-RW/DVD-ROM SBW-161> at ata1-master PIO4 GEOM: create disk cd0 dp=0xc4d8be00 cd0 at ata1 bus 0 target 0 lun 0 cd0: <QSI DVD/CDRW SBW-161 SX14> Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Mounting root from ufs:/dev/ad0s3a NVRM: detected agp.ko, aborting NVIDIA AGP setup! NVRM: detected agp.ko, aborting NVIDIA AGP setup! stray irq7 --Boundary-00=_hlndBLymdT8RE0D Content-Type: text/plain; charset="koi8-r"; name="dmesg-5.2.1-verbose" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dmesg-5.2.1-verbose" ): Retrying Command (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error Mounting root from ufs:/dev/ad0s3a start_init: trying /sbin/init linprocfs registered NVRM: detected agp.ko, aborting NVIDIA AGP setup! NVRM: detected agp.ko, aborting NVIDIA AGP setup! Waiting (max 60 seconds) for system process `vnlru' to stop...stopped Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped Waiting (max 60 seconds) for system process `syncer' to stop...stopped syncing disks, buffers remaining... 10 10 done Uptime: 3m44s sbp_logout_all Shutting down ACPI Rebooting... Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2.1-RELEASE-p9 #0: Thu Aug 12 16:02:22 CEST 2004 root@vital.biophysics.nbi.dk:/usr/src/sys/i386/compile/VITAL Preloaded elf kernel "/boot/kernel/kernel" at 0xc0c8a000. Preloaded elf module "/boot/kernel/linux.ko" at 0xc0c8a294. Preloaded elf module "/boot/modules/nvidia.ko" at 0xc0c8a340. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0c8a3ec. Calibrating clock(s) ... i8254 clock: 1193060 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1998588140 Hz CPU: Intel(R) Celeron(R) CPU 2.00GHz (1998.59-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> real memory = 536805376 (511 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001026000 - 0x000000001f6c9fff, 510279680 bytes (124580 pages) avail memory = 507572224 (484 MB) bios32: Found BIOS32 Service Directory header at 0xc00fdad0 bios32: Entry = 0xfdae0 (c00fdae0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xdb01 pnpbios: Found PnP BIOS data at 0xc00f7890 pnpbios: Entry = f0000:66eb Rev = 1.0 Other BIOS signatures found: null: <null device, zero device> random: <entropy source> mem: <memory & I/O> Pentium Pro MTRR support enabled npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <AMIINT SiS645XX> on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x00000308 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=06511039) pcibios: BIOS version 2.10 Using $PIR table, 10 entries at 0xc00f7eb0 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 1 A 0x41 3 4 5 7 10 11 12 14 15 embedded 0 1 B 0x42 3 4 5 7 10 11 12 14 15 embedded 0 1 C 0x43 3 4 5 7 10 11 12 14 15 embedded 0 1 D 0x44 3 4 5 7 10 11 12 14 15 embedded 0 2 A 0x41 3 4 5 7 10 11 12 14 15 embedded 0 2 B 0x42 3 4 5 7 10 11 12 14 15 embedded 0 2 C 0x43 3 4 5 7 10 11 12 14 15 embedded 0 2 D 0x44 3 4 5 7 10 11 12 14 15 embedded 0 3 A 0x60 3 4 7 10 12 14 15 embedded 0 3 B 0x61 3 4 7 10 12 14 15 embedded 0 3 C 0x62 3 4 7 10 12 14 15 embedded 0 3 D 0x63 3 4 7 10 12 14 15 slot 1 0 4 A 0x44 3 4 5 7 10 11 12 14 15 slot 2 0 6 A 0x44 3 4 5 7 10 11 12 14 15 slot 2 0 6 B 0x41 3 4 5 7 10 11 12 14 15 slot 2 0 6 C 0x42 3 4 5 7 10 11 12 14 15 slot 2 0 6 D 0x43 3 4 5 7 10 11 12 14 15 slot 3 0 13 A 0x44 3 4 5 7 10 11 12 14 15 slot 3 0 13 B 0x41 3 4 5 7 10 11 12 14 15 slot 3 0 13 C 0x42 3 4 5 7 10 11 12 14 15 slot 3 0 13 D 0x43 3 4 5 7 10 11 12 14 15 slot 4 0 8 A 0x41 3 4 5 7 10 11 12 14 15 slot 4 0 8 B 0x42 3 4 5 7 10 11 12 14 15 slot 4 0 8 C 0x43 3 4 5 7 10 11 12 14 15 slot 4 0 8 D 0x44 3 4 5 7 10 11 12 14 15 slot 5 0 10 A 0x42 3 4 5 7 10 11 12 14 15 slot 5 0 10 B 0x43 3 4 5 7 10 11 12 14 15 slot 5 0 10 C 0x44 3 4 5 7 10 11 12 14 15 slot 5 0 10 D 0x41 3 4 5 7 10 11 12 14 15 slot 6 0 12 A 0x43 3 4 5 7 10 11 12 14 15 slot 6 0 12 B 0x44 3 4 5 7 10 11 12 14 15 slot 6 0 12 C 0x41 3 4 5 7 10 11 12 14 15 slot 6 0 12 D 0x42 3 4 5 7 10 11 12 14 15 slot 7 0 15 A 0x43 3 4 5 7 10 11 12 14 15 AcpiOsDerivePciId: bus 0 dev 2 func 0 AcpiOsDerivePciId: bus 0 dev 2 func 0 acpi0: Power Button (fixed) ACPI timer looks GOOD min = 2, max = 4, width = 2 ACPI timer looks GOOD min = 2, max = 4, width = 2 ACPI timer looks GOOD min = 2, max = 4, width = 2 ACPI timer looks GOOD min = 2, max = 4, width = 2 ACPI timer looks GOOD min = 2, max = 4, width = 2 ACPI timer looks GOOD min = 2, max = 4, width = 2 ACPI timer looks GOOD min = 2, max = 4, width = 2 ACPI timer looks GOOD min = 2, max = 4, width = 2 ACPI timer looks GOOD min = 2, max = 4, width = 2 ACPI timer looks GOOD min = 2, max = 4, width = 2 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 AcpiOsDerivePciId: bus 0 dev 0 func 0 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) acpi_cpu1: <CPU> port 0x530-0x537 on acpi0 device_probe_and_attach: acpi_cpu1 attach returned 6 acpi_button0: <Power Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 unknown: not probed (disabled) pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \\_SB_.LNKA irq 11: [ 3 4 5 7 10 11 12 14 15] 0.1.0 \\_SB_.LNKB irq 5: [ 3 4 5 7 10 11 12 14 15] 0.1.1 \\_SB_.LNKC irq 10: [ 3 4 5 7 10 11 12 14 15] 0.1.2 \\_SB_.LNKD irq 11: [ 3 4 5 7 10 11 12 14 15] 0.1.3 \\_SB_.LNKA irq 11: [ 3 4 5 7 10 11 12 14 15] 0.2.0 \\_SB_.LNKB irq 5: [ 3 4 5 7 10 11 12 14 15] 0.2.1 \\_SB_.LNKC irq 10: [ 3 4 5 7 10 11 12 14 15] 0.2.2 \\_SB_.LNKD irq 11: [ 3 4 5 7 10 11 12 14 15] 0.2.3 \\_SB_.LNKE irq 10: [ 3 4 7 10 12 14 15] 0.3.0 \\_SB_.LNKF irq 10: [ 3 4 7 10 12 14 15] 0.3.1 \\_SB_.LNKG irq 10: [ 3 4 7 10 12 14 15] 0.3.2 \\_SB_.LNKH irq 10: [ 3 4 7 10 12 14 15] 0.3.3 \\_SB_.LNKD irq 11: [ 3 4 5 7 10 11 12 14 15] 0.4.0 \\_SB_.LNKD irq 11: [ 3 4 5 7 10 11 12 14 15] 0.6.0 \\_SB_.LNKA irq 11: [ 3 4 5 7 10 11 12 14 15] 0.6.1 \\_SB_.LNKB irq 5: [ 3 4 5 7 10 11 12 14 15] 0.6.2 \\_SB_.LNKC irq 10: [ 3 4 5 7 10 11 12 14 15] 0.6.3 \\_SB_.LNKD irq 11: [ 3 4 5 7 10 11 12 14 15] 0.13.0 \\_SB_.LNKA irq 11: [ 3 4 5 7 10 11 12 14 15] 0.13.1 \\_SB_.LNKB irq 5: [ 3 4 5 7 10 11 12 14 15] 0.13.2 \\_SB_.LNKC irq 10: [ 3 4 5 7 10 11 12 14 15] 0.13.3 \\_SB_.LNKA irq 11: [ 3 4 5 7 10 11 12 14 15] 0.8.0 \\_SB_.LNKB irq 5: [ 3 4 5 7 10 11 12 14 15] 0.8.1 \\_SB_.LNKC irq 10: [ 3 4 5 7 10 11 12 14 15] 0.8.2 \\_SB_.LNKD irq 11: [ 3 4 5 7 10 11 12 14 15] 0.8.3 \\_SB_.LNKB irq 5: [ 3 4 5 7 10 11 12 14 15] 0.10.0 \\_SB_.LNKC irq 10: [ 3 4 5 7 10 11 12 14 15] 0.10.1 \\_SB_.LNKD irq 11: [ 3 4 5 7 10 11 12 14 15] 0.10.2 \\_SB_.LNKA irq 11: [ 3 4 5 7 10 11 12 14 15] 0.10.3 \\_SB_.LNKC irq 10: [ 3 4 5 7 10 11 12 14 15] 0.12.0 \\_SB_.LNKD irq 11: [ 3 4 5 7 10 11 12 14 15] 0.12.1 \\_SB_.LNKA irq 11: [ 3 4 5 7 10 11 12 14 15] 0.12.2 \\_SB_.LNKB irq 5: [ 3 4 5 7 10 11 12 14 15] 0.12.3 \\_SB_.LNKC irq 10: [ 3 4 5 7 10 11 12 14 15] 0.15.0 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.LNKA irq 11: [ 3 4 5 7 10 11 12 14 15] 0.1.0 \\_SB_.LNKB irq 5: [ 3 4 5 7 10 11 12 14 15] 0.1.1 \\_SB_.LNKC irq 10: [ 3 4 5 7 10 11 12 14 15] 0.1.2 \\_SB_.LNKD irq 11: [ 3 4 5 7 10 11 12 14 15] 0.1.3 \\_SB_.LNKA irq 11: [ 3 4 5 7 10 11 12 14 15] 0.2.0 \\_SB_.LNKB irq 5: [ 3 4 5 7 10 11 12 14 15] 0.2.1 \\_SB_.LNKC irq 10: [ 3 4 5 7 10 11 12 14 15] 0.2.2 \\_SB_.LNKD irq 11: [ 3 4 5 7 10 11 12 14 15] 0.2.3 \\_SB_.LNKE irq 10: [ 3 4 7 10 12 14 15] 0.3.0 \\_SB_.LNKF irq 10: [ 3 4 7 10 12 14 15] 0.3.1 \\_SB_.LNKG irq 10: [ 3 4 7 10 12 14 15] 0.3.2 \\_SB_.LNKH irq 10: [ 3 4 7 10 12 14 15] 0.3.3 \\_SB_.LNKD irq 11: [ 3 4 5 7 10 11 12 14 15] 0.4.0 \\_SB_.LNKD irq 11: [ 3 4 5 7 10 11 12 14 15] 0.6.0 \\_SB_.LNKA irq 11: [ 3 4 5 7 10 11 12 14 15] 0.6.1 \\_SB_.LNKB irq 5: [ 3 4 5 7 10 11 12 14 15] 0.6.2 \\_SB_.LNKC irq 10: [ 3 4 5 7 10 11 12 14 15] 0.6.3 \\_SB_.LNKD irq 11: [ 3 4 5 7 10 11 12 14 15] 0.13.0 \\_SB_.LNKA irq 11: [ 3 4 5 7 10 11 12 14 15] 0.13.1 \\_SB_.LNKB irq 5: [ 3 4 5 7 10 11 12 14 15] 0.13.2 \\_SB_.LNKC irq 10: [ 3 4 5 7 10 11 12 14 15] 0.13.3 \\_SB_.LNKA irq 11: [ 3 4 5 7 10 11 12 14 15] 0.8.0 \\_SB_.LNKB irq 5: [ 3 4 5 7 10 11 12 14 15] 0.8.1 \\_SB_.LNKC irq 10: [ 3 4 5 7 10 11 12 14 15] 0.8.2 \\_SB_.LNKD irq 11: [ 3 4 5 7 10 11 12 14 15] 0.8.3 \\_SB_.LNKB irq 5: [ 3 4 5 7 10 11 12 14 15] 0.10.0 \\_SB_.LNKC irq 10: [ 3 4 5 7 10 11 12 14 15] 0.10.1 \\_SB_.LNKD irq 11: [ 3 4 5 7 10 11 12 14 15] 0.10.2 \\_SB_.LNKA irq 11: [ 3 4 5 7 10 11 12 14 15] 0.10.3 \\_SB_.LNKC irq 10: [ 3 4 5 7 10 11 12 14 15] 0.12.0 \\_SB_.LNKD irq 11: [ 3 4 5 7 10 11 12 14 15] 0.12.1 \\_SB_.LNKA irq 11: [ 3 4 5 7 10 11 12 14 15] 0.12.2 \\_SB_.LNKB irq 5: [ 3 4 5 7 10 11 12 14 15] 0.12.3 \\_SB_.LNKC irq 10: [ 3 4 5 7 10 11 12 14 15] 0.15.0 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 1, range 32, base e0000000, size 26, enabled found-> vendor=0x1039, dev=0x0651, revid=0x01 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x2210, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1039, dev=0x0001, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns) found-> vendor=0x1039, dev=0x0008, revid=0x04 bus=0, slot=2, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base dffff000, size 12, enabled pcib0: matched entry for 0.2.INTB (source \\_SB_.LNKB) pcib0: slot 2 INTB is routed to irq 5 found-> vendor=0x1039, dev=0x7007, revid=0x00 bus=0, slot=2, func=3 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x0c (3000 ns) intpin=b, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[20]: type 4, range 32, base 0000ff00, size 4, enabled found-> vendor=0x1039, dev=0x5513, revid=0x00 bus=0, slot=2, func=5 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 0000d400, size 8, enabled map[14]: type 4, range 32, base 0000d000, size 7, enabled pcib0: matched entry for 0.2.INTC (source \\_SB_.LNKC) pcib0: slot 2 INTC is routed to irq 10 found-> vendor=0x1039, dev=0x7013, revid=0xa0 bus=0, slot=2, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0105, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x34 (13000 ns), maxlat=0x0b (2750 ns) intpin=c, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000dc00, size 8, enabled map[14]: type 4, range 32, base 0000d800, size 7, enabled pcib0: matched entry for 0.2.INTC (source \\_SB_.LNKC) pcib0: slot 2 INTC is routed to irq 10 found-> vendor=0x1039, dev=0x7012, revid=0xa0 bus=0, slot=2, func=7 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0105, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x34 (13000 ns), maxlat=0x0b (2750 ns) intpin=c, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base dfffb000, size 12, enabled pcib0: matched entry for 0.3.INTA (source \\_SB_.LNKE) pcib0: slot 3 INTA is routed to irq 10 found-> vendor=0x1039, dev=0x7001, revid=0x0f bus=0, slot=3, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x0280, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=a, irq=10 map[10]: type 1, range 32, base dfffc000, size 12, enabled pcib0: matched entry for 0.3.INTB (source \\_SB_.LNKF) pcib0: slot 3 INTB is routed to irq 10 found-> vendor=0x1039, dev=0x7001, revid=0x0f bus=0, slot=3, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0280, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=b, irq=10 map[10]: type 1, range 32, base dfffd000, size 12, enabled pcib0: matched entry for 0.3.INTC (source \\_SB_.LNKG) pcib0: slot 3 INTC is routed to irq 10 found-> vendor=0x1039, dev=0x7001, revid=0x0f bus=0, slot=3, func=2 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0280, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=c, irq=10 map[10]: type 1, range 32, base dfffe000, size 12, enabled pcib0: matched entry for 0.3.INTD (source \\_SB_.LNKH) pcib0: slot 3 INTD is routed to irq 10 found-> vendor=0x1039, dev=0x7002, revid=0x00 bus=0, slot=3, func=3 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=d, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000cc00, size 8, enabled map[14]: type 1, range 32, base dfffa000, size 12, enabled pcib0: matched entry for 0.4.INTA (source \\_SB_.LNKD) pcib0: slot 4 INTA is routed to irq 11 found-> vendor=0x1039, dev=0x0900, revid=0x91 bus=0, slot=4, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x34 (13000 ns), maxlat=0x0b (2750 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 agp0: <SIS Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 agp0: allocating GATT for aperture of size 64M pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 2 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xddd00000-0xdfefffff pcib1: prefetched decode 0xd5900000-0xddbfffff pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.AGP_ - AE_NOT_FOUND pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 1, range 32, base de000000, size 24, enabled map[14]: type 3, range 32, base d8000000, size 26, enabled map[18]: type 3, range 32, base ddb80000, size 19, enabled found-> vendor=0x10de, dev=0x0176, revid=0xa3 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 nvidia0: <GeForce4 420 Go 32M> mem 0xddb80000-0xddbfffff,0xd8000000-0xdbffffff,0xde000000-0xdeffffff irq 11 at device 0.0 on pci1 pcib1: device nvidia0 requested decoded memory range 0xde000000-0xdeffffff pcib1: device nvidia0 requested decoded memory range 0xd8000000-0xdbffffff isab0: <PCI-ISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 fwohci0: vendor=1039, dev=7007 fwohci0: <1394 Open Host Controller Interface> mem 0xdffff000-0xdfffffff irq 5 at device 2.3 on pci0 fwohci0: latency timer 64 -> 64. fwohci0: cache size 0 -> 8. fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 00:00:0a:e6:ff:03:7f:19 fwohci0: resetting OHCI...done (loop=0) fwohci0: fwphy_rddata: 0x2 loop=1, retry=0 fwohci0: fwphy_rddata: 0x3 loop=1, retry=0 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: fwphy_rddata: 0x5 loop=1, retry=0 fwohci0: Enable 1394a Enhancements fwohci0: fwphy_rddata: 0x5 loop=1, retry=0 fwohci0: fwphy_rddata: 0x2 loop=1, retry=0 fwohci0: fwphy_rddata: 0x4 loop=1, retry=0 fwohci0: fwphy_rddata: 0x4 loop=1, retry=0 fwohci0: fwphy_rddata: 0x4 loop=1, retry=0 fwohci0: Link S400, max_rec 2048 bytes. fwohci0: BUS_OPT 0xf864a002 -> 0xf864a002 fwohci0: fwohci_set_intr: 1 firewire0: <IEEE1394(FireWire) bus> on fwohci0 sbp0: <SBP-2/SCSI over FireWire> on firewire0 sbp_attach (cold=1) fwohci0: Initiate bus reset fwohci0: fwphy_rddata: 0x1 loop=1, retry=0 fwohci0: fwphy_rddata: 0x1 loop=1, retry=0 atapci0: <SiS 962/963 UDMA133 controller> port 0xff00-0xff0f at device 2.5 on pci0 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1-master: stat=0x10 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x01 err=0x01 lsb=0x00 msb=0x00 ata1: reset tp2 mask=03 stat0=10 stat1=01 devices=0x4<ATAPI_MASTER> ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: <simple comms> at device 2.6 (no driver attached) pcm0: <SiS 7012> port 0xd800-0xd87f,0xdc00-0xdcff irq 10 at device 2.7 on pci0 pcm0: <C-Media Electronics CMI9739 AC97 Codec (id = 0x434d4961)> pcm0: Codec features 5 bit master volume, no 3D Stereo Enhancement pcm0: Primary codec extended features double rate PCM, reserved 1, center DAC, surround DAC, LFE DAC, reserved 4 pcm0: sndbuf_setmap 33a000, 4000; 0xdcbfc000 -> 33a000 pcm0: sndbuf_setmap 351000, 4000; 0xdcc00000 -> 351000 ohci0: <SiS 5571 USB controller> mem 0xdfffb000-0xdfffbfff irq 10 at device 3.0 on pci0 usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ohci1: <SiS 5571 USB controller> mem 0xdfffc000-0xdfffcfff irq 10 at device 3.1 on pci0 usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <SiS 5571 USB controller> on ohci1 usb1: USB revision 1.0 uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ums0: NOVATEK USB Mouse STD., rev 1.00/1.00, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. ohci2: <SiS 5571 USB controller> mem 0xdfffd000-0xdfffdfff irq 10 at device 3.2 on pci0 usb2: OHCI version 1.0, legacy support usb2: SMM does not respond, resetting usb2: <SiS 5571 USB controller> on ohci2 usb2: USB revision 1.0 uhub2: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 3.3 (no driver attached) sis0: <SiS 900 10/100BaseTX> port 0xcc00-0xccff mem 0xdfffa000-0xdfffafff irq 11 at device 4.0 on pci0 sis0: Ethernet address: 00:0a:e6:56:2f:ce miibus0: <MII bus> on sis0 rlphy0: <RTL8201L 10/100 media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis0: bpf attached mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) unknown: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: unable to allocate IRQ unknown: not probed (disabled) unknown: not probed (disabled) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) acpi_cpu1: <CPU> port 0x530-0x537 on acpi0 device_probe_and_attach: acpi_cpu1 attach returned 6 unknown: not probed (disabled) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) ppc0 failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0 failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0 sio1 failed to probe at port 0x2f8 irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 1998588140 Hz quality 800 Timecounters tick every 10.000 msec Linux ELF exec handler installed lo0: bpf attached acpi_cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: setting PIO4 on SiS 5513 chip ata0-master: DMA limited to UDMA33, non-ATA66 cable or device ata0-master: setting UDMA33 on SiS 5513 chip GEOM: create disk ad0 dp=0xc4c7fb60 ad0: <FUJITSU MHS2020AT/8004> ATA-6 disk at ata0-master ad0: 19077MB (39070080 sectors), 38760 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA33 (probe0:ata0:0:0:0): error 22 (probe0:ata0:0:0:0): Unretryable Error (probe1:ata0:0:1:0): error 22 (probe1:ata0:0:1:0): Unretryable Error GEOM: new disk ad0 ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin ata1-master: setting PIO4 on SiS 5513 chip acd0: <QSI CD-RW/DVD-ROM SBW-161/SX14> CDRW drive at ata1 as master acd0: read 4125KB/s (4125KB/s) write 2757KB/s (2757KB/s), 2048KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc pcm0: measured ac97 link rate at 48012 Hz, will use 48000 Hz (probe1:ata1:0:1:0): error 22 (probe1:ata1:0:1:0): Unretryable Error (probe2:sbp0:0:0:0): error 22 (probe2:sbp0:0:0:0): Unretryable Error (probe3:sbp0:0:1:0): error 22 (probe3:sbp0:0:1:0): Unretryable Error (probe4:sbp0:0:2:0): error 22 (probe4:sbp0:0:2:0): Unretryable Error (probe5:sbp0:0:3:0): error 22 (probe5:sbp0:0:3:0): Unretryable Error (probe6:sbp0:0:4:0): error 22 (probe6:sbp0:0:4:0): Unretryable Error (probe7:sbp0:0:5:0): error 22 (probe7:sbp0:0:5:0): Unretryable Error (probe8:sbp0:0:6:0): error 22 (probe8:sbp0:0:6:0): Unretryable Error (probe9:ata0:0:0:0): error 22 (probe9:ata0:0:0:0): Unretryable Error (probe10:ata0:0:1:0): error 22 (probe10:ata0:0:1:0): Unretryable Error (probe1:ata1:0:1:0): error 22 (probe1:ata1:0:1:0): Unretryable Error pass0 at ata1 bus 0 target 0 lun 0 pass0: <QSI DVD/CDRW SBW-161 SX14> Removable CD-ROM SCSI-0 device pass0: Serial Number [ pass0: 16.000MB/s transfers GEOM: create disk cd0 dp=0xc4d8be00 (cd0:ata1:0:0:0): Retrying Command (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error cd0 at ata1 bus 0 target 0 lun 0 cd0: <QSI DVD/CDRW SBW-161 SX14> Removable CD-ROM SCSI-0 device cd0: Serial Number [ cd0: 16.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present [0] f:00 typ:11 s(CHS):0/1/1 e(CHS):1023/0/63 s:63 l:5124672 [1] f:00 typ:15 s(CHS):1023/255/63 e(CHS):1023/10/63 s:5205060 l:16980705 [2] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/15/63 s:22185765 l:16884315 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 2623832064 end 2623864319 GEOM: Configure ad0s2, start 2664990720 length 8694120960 end 11359111679 GEOM: Configure ad0s3, start 11359111680 length 8644769280 end 20003880959 GEOM: new disk cd0 MBREXT Slice 5 on ad0s2: [0] f:00 typ:11 s(CHS):324/1/1 e(CHS):1023/254/63 s:63 l:16980642 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s5, start 32256 length 8694088704 end 8694120959 GEOM: Configure ad0s3a, start 0 length 536870912 end 536870911 GEOM: Configure ad0s3b, start 536870912 length 134217728 end 671088639 GEOM: Configure ad0s3c, start 0 length 8644769280 end 8644769279 GEOM: Configure ad0s3d, start 671088640 length 536870912 end 1207959551 GEOM: Configure ad0s3e, start 1207959552 length 7436809728 end 8644769279 (cd0:ata1:0:0:0): Retrying Command (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error (cd0:ata1:0:0:0): Retrying Command (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error Mounting root from ufs:/dev/ad0s3a start_init: trying /sbin/init linprocfs registered NVRM: detected agp.ko, aborting NVIDIA AGP setup! NVRM: detected agp.ko, aborting NVIDIA AGP setup! --Boundary-00=_hlndBLymdT8RE0D--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200410201642.41108.voliyny>