Date: Fri, 18 Apr 2008 19:48:23 +0200 From: "Josep Pujadas i Jubany" <josep@bellera.cat> To: freebsd-current@freebsd.org Subject: Re: gmirror problem with HP Proliant ML110 G5 Message-ID: <20080418173850.M43706@bellera.cat> In-Reply-To: <fu9nof$a6r$1@ger.gmane.org> References: <20080417171439.M22551@bellera.cat> <fu9nof$a6r$1@ger.gmane.org>
index | next in thread | previous in thread | raw e-mail
On Fri, 18 Apr 2008 10:56:47 +0200, Ivan Voras wrote
> It looks like a hardware failure, either:
> - bad drive
> - bad cables
> - bad or insufficiently powerful power supply
>
> What controller are you using?
# pciconf -lv
atapci0@pci0:0:31:2: class=0x01018a card=0x31f4103c chip=0x29208086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801IB/IR/IH (ICH9 Family) 4 port Serial ATA Storage
Controller 1'
class = mass storage
subclass = ATA
atapci1@pci0:0:31:5: class=0x010185 card=0x31f4103c chip=0x29268086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801IB/IR/IH (ICH9 Family) 2 port Serial ATA Storage
Controller 2'
class = mass storage
subclass = ATA
# atacontrol list
ATA channel 0:
Master: ad0 <ST3250620NS/3BJP> Serial ATA v1.0
Slave: no device present
ATA channel 1:
Master: ad2 <GB0250C8045/HPG1> Serial ATA v1.0
Slave: no device present
ATA channel 2:
Master: acd0 <HL-DT-ST DVD-RAM GSA-H60L/E904> Serial ATA v1.0
Slave: no device present
ATA channel 3:
Master: no device present
Slave: no device present
I installed /usr/ports/sysutils/smartmontools and I performed a long test to
the disk:
# smartctl -t long /dev/ad2
# smartctl -a /dev/ad2 | more
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 27 -
The disk seems ok. I'm going to try to change the SATA cable, but it is new
as the disk ...
Regards,
Josep Pujadas
home |
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20080418173850.M43706>