Date: Mon, 1 May 2000 23:52:27 -0700 (PDT) From: Peter Saeys <psaeys@yahoo.com> To: questions@freebsd.org Subject: cannot access my iomega zip-drive Message-ID: <20000502065227.10663.qmail@web113.yahoomail.com>
next in thread | raw e-mail | index | archive | help
Hello all! I have a problem accessing an Iomega ZIP-drive in FreeBSD. Somehow during boot it cannot recognize the driver? In my Linux-box it works just perfectly. bash-2.03# mount_msdos /dev/da1s4 /mnt mount_msdos: /dev/da1s4: Device not configured bash-2.03# bash-2.03# dmesg gives: ppbus0: IEEE1284 device found /NIBBLE Probing for PnP devices on ppbus0: plip0: <PLIP network interface> on ppbus0 lpt1: <Printer> on ppbus0 lpt1: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 vpo0: <Iomega VPI0 Parallel to SCSI interface> on ppbus0 vpo0: EPP 1.9 mode sbc1: <Creative ViBRA16C> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,5 on isa0 sbc1: setting card to irq 5, drq 1, 5 pcm1: <SB DSP 4.13> on sbc1 unknown0: <Game> at port 0x200-0x207 on isa0 ad0: 1222MB <QUANTUM FIREBALL_TM1280A> [2484/16/63] at ata0-master using WDMA2 ad2: 2014MB <WDC AC22100H> [4092/16/63] at ata1-master using WDMA2 ad3: 1668MB <FUJITSU MPA3017AT> [3390/16/63] at ata1-slave using WDMA2 acd0: CDROM <665A> at ata0-slave using PIO2 vpo0: VP0 error/timeout (5) vpo0: VP0 error/timeout (2) vpo0: VP0 error/timeout (5) vpo0: VP0 error/timeout (2) vpo0: VP0 error/timeout (5) Mounting root from ufs:/dev/ad2s1a ... to reach the printer on the same parallel port is no problem... ideas any? Thanks Hello all! I have a problem accessing an Iomega ZIP-drive in FreeBSD. Somehow during boot it cannot recognize the driver? In my Linux-box it works just perfectly. bash-2.03# mount_msdos /dev/da1s4 /mnt mount_msdos: /dev/da1s4: Device not configured bash-2.03# bash-2.03# dmesg gives: ppbus0: IEEE1284 device found /NIBBLE Probing for PnP devices on ppbus0: plip0: <PLIP network interface> on ppbus0 lpt1: <Printer> on ppbus0 lpt1: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 vpo0: <Iomega VPI0 Parallel to SCSI interface> on ppbus0 vpo0: EPP 1.9 mode sbc1: <Creative ViBRA16C> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,5 on isa0 sbc1: setting card to irq 5, drq 1, 5 pcm1: <SB DSP 4.13> on sbc1 unknown0: <Game> at port 0x200-0x207 on isa0 ad0: 1222MB <QUANTUM FIREBALL_TM1280A> [2484/16/63] at ata0-master using WDMA2 ad2: 2014MB <WDC AC22100H> [4092/16/63] at ata1-master using WDMA2 ad3: 1668MB <FUJITSU MPA3017AT> [3390/16/63] at ata1-slave using WDMA2 acd0: CDROM <665A> at ata0-slave using PIO2 vpo0: VP0 error/timeout (5) vpo0: VP0 error/timeout (2) vpo0: VP0 error/timeout (5) vpo0: VP0 error/timeout (2) vpo0: VP0 error/timeout (5) Mounting root from ufs:/dev/ad2s1a ... to reach the printer on the same parallel port is no problem... I'm running the 4.0 release on a p166 ideas any? Thanks Peter.S. __________________________________________________ Do You Yahoo!? Send instant messages & get email alerts with Yahoo! Messenger. http://im.yahoo.com/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000502065227.10663.qmail>