Date: Mon, 1 Mar 2004 11:02:32 -0600 From: John <strgout@unixjunkie.com> To: freebsd-current@freebsd.org Subject: Re: no sound running current from febtober 21nd Message-ID: <20040301170232.GA19761@mail.unixjunkie.com> In-Reply-To: <20040227051242.GA40180@mail.unixjunkie.com> References: <20040227051242.GA40180@mail.unixjunkie.com>
next in thread | previous in thread | raw e-mail | index | archive | help
just an FYI. I've tried booting without acpi, i've rebuilt the kernel without
pcm, then loaded snd_pcm and snd_masstro (from multi user) which made the
laptop reboot when i hit enter (kldload snd_mastro<ENTER> system reboot).
No panic, just reboot. i also had to turn the laptop off as this messed up
the video for some reason. Then i tried loading from the boot loader (load
snd_pcm, load snd_maestro) and still no go. Same errors as above. oh btw i
tried the module with acpi also.
I also did a boot -v after loading the modules. Once i get a blank cd i'll
try a live 4.x cd.
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #4: Sat Feb 28 01:59:41 GMT 2004
root@laptopwi.unixjunkie.com:/usr/obj/usr/src/sys/LAPTOP
Preloaded elf kernel "/boot/kernel/kernel" at 0xc084b000.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc084b2a0.
Preloaded elf module "/boot/kernel/snd_maestro.ko" at 0xc084b34c.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc084b3fc.
Calibrating clock(s) ... i8254 clock: 1193165 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 399923847 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (399.92-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x66a Stepping = 10
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,MMX,FXSR>
real memory = 201195520 (191 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c29000 - 0x000000000bc4ffff, 184709120 bytes (45095 pages)
avail memory = 187191296 (178 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f0210
bios32: Entry = 0xfc3b9 (c00fc3b9) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xedcd
pnpbios: Found PnP BIOS data at 0xc00f8ed0
pnpbios: Entry = f0000:933a Rev = 1.0
pnpbios: Event flag at 510
pnpbios: OEM ID d933f351
Other BIOS signatures found:
wlan: <802.11 Link Layer>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
random: <entropy source>
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <TOSHIB 750> on motherboard
acpi0: Power Button (fixed)
ACPI timer looks BAD min = 2, max = 7, width = 5
ACPI timer looks BAD min = 1, max = 16777215, width = 16777214
ACPI timer looks BAD min = 1, max = 8, width = 7
ACPI timer looks BAD min = 2, max = 8, width = 6
ACPI timer looks BAD min = 1, max = 16777211, width = 16777210
ACPI timer looks BAD min = 1, max = 8, width = 7
ACPI timer looks BAD min = 2, max = 8, width = 6
ACPI timer looks BAD min = 2, max = 8, width = 6
ACPI timer looks BAD min = 2, max = 8, width = 6
ACPI timer looks BAD min = 1, max = 16777215, width = 16777214
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfe08-0xfe0b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71928086)
pcibios: BIOS version 2.10
Found $PIR table, 7 entries at 0xc00f0180
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 2 A 0x60 11
embedded 0 2 B 0x61 11
embedded 0 10 A 0x62 11
embedded 0 4 A 0x60 11
embedded 0 7 A 0xff 3
embedded 0 12 A 0x61 11
embedded 0 5 D 0x63 11
slot 1 0 6 A 0x62 11
slot 1 0 6 B 0x63 11
slot 1 0 6 C 0x60 11
slot 1 0 6 D 0x61 11
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.LNKA irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.2.0
\\_SB_.LNKB irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.2.1
\\_SB_.LNKC irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.10.0
\\_SB_.LNKA irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.4.0
\\_SB_.LNKE irq 3: [ 3 4] low,level,sharable 0.7.0
\\_SB_.LNKD irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.9.0
\\_SB_.LNKB irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.12.0
\\_SB_.LNKD irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.5.3
\\_SB_.LNKC irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.6.0
\\_SB_.LNKD irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.6.1
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKA irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.2.0
\\_SB_.LNKB irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.2.1
\\_SB_.LNKC irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.10.0
\\_SB_.LNKA irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.4.0
\\_SB_.LNKE irq 3: [ 3 4] low,level,sharable 0.7.0
\\_SB_.LNKD irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.9.0
\\_SB_.LNKB irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.12.0
\\_SB_.LNKD irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.5.3
\\_SB_.LNKC irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.6.0
\\_SB_.LNKD irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.6.1
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base e0000000, size 28, enabled
found-> vendor=0x8086, dev=0x7192, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib0: matched entry for 0.2.INTA (source \\_SB_.LNKA)
pcib0: slot 2 INTA is routed to irq 11
found-> vendor=0x1179, dev=0x060a, revid=0x07
bus=0, slot=2, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0000, statreg=0x0480, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
pcib0: matched entry for 0.2.INTB (source \\_SB_.LNKB)
pcib0: slot 2 INTB is routed to irq 11
found-> vendor=0x1179, dev=0x060a, revid=0x07
bus=0, slot=2, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0000, statreg=0x0480, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[10]: type 1, range 32, base ff800000, size 22, enabled
map[14]: type 1, range 32, base ff7e0000, size 17, enabled
map[18]: type 1, range 32, base ff000000, size 22, enabled
pcib0: matched entry for 0.4.INTA (source \\_SB_.LNKA)
pcib0: slot 4 INTA is routed to irq 11
found-> vendor=0x1023, dev=0x9525, revid=0x49
bus=0, slot=4, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 1 supports D0 D1 D2 D3 current D0
found-> vendor=0x8086, dev=0x7110, revid=0x02
bus=0, slot=5, func=0
class=06-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000fe60, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=5, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000ffe0, size 5, enabled
pcib0: matched entry for 0.5.INTD (source \\_SB_.LNKD)
pcib0: slot 5 INTD is routed to irq 11
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=5, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
map[90]: type 4, range 32, base 0000fe70, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x02
bus=0, slot=5, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base ffefff00, size 8, enabled
map[14]: type 4, range 32, base 000002f8, size 3, enabled
map[18]: type 4, range 32, base 00001c00, size 8, enabled
pcib0: matched entry for 0.7.INTA (source \\_SB_.LNKE)
pcib0: slot 7 INTA is routed to irq 3
found-> vendor=0x11c1, dev=0x0441, revid=0x01
bus=0, slot=7, func=0
class=07-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0xfc (63000 ns), maxlat=0x0e (3500 ns)
intpin=a, irq=3
powerspec 2 supports D0 D2 D3 current D0
map[10]: type 4, range 32, base 0000ff80, size 5, enabled
pcib0: matched entry for 0.10.INTA (source \\_SB_.LNKC)
pcib0: slot 10 INTA is routed to irq 11
found-> vendor=0x1179, dev=0x0701, revid=0x23
bus=0, slot=10, func=0
class=07-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0400, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[10]: type 4, range 32, base 0000fc00, size 8, enabled
pcib0: matched entry for 0.12.INTA (source \\_SB_.LNKB)
pcib0: slot 12 INTA is routed to irq 11
found-> vendor=0x125d, dev=0x1978, revid=0x10
bus=0, slot=12, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
cbb0: <ToPIC95B PCI-CardBus Bridge> irq 11 at device 2.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0x060a1179 0x04800007 0x06070007 0x00820000
0x10: 0x88000000 0x04800000 0x00141400 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc
0x30: 0x00000000 0x0000fffc 0x00000000 0x0400010b
0x40: 0x00011179 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x01000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x860010f0 0x00000002 0x00000000 0x0000d100
0xb0: 0x3f3f3fcf 0x0a081020 0x00010100 0x000003f1
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000008
cbb1: <ToPIC95B PCI-CardBus Bridge> irq 11 at device 2.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
0x00: 0x060a1179 0x04800007 0x06070007 0x00820000
0x10: 0x88001000 0x04800000 0x00151500 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc
0x30: 0x00000000 0x0000fffc 0x00000000 0x0400020b
0x40: 0x00011179 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x01000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x860020f0 0x00000002 0x00000000 0x0000d100
0xb0: 0x3f3f3fcf 0x0a081020 0x00010100 0x000003f1
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000008
pci0: <display, VGA> at device 4.0 (no driver attached)
PCI-ISA bridge with incorrect subclass 0x80
PCI-ISA bridge with incorrect subclass 0x80
isab0: <PCI-ISA bridge> at device 5.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xfe60-0xfe6f at device 5.1 on pci
0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x00 err=0x04 lsb=0x14 msb=0xeb
ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, USB> at device 5.2 (no driver attached)
pci0: <bridge, PCI-unknown> at device 5.3 (no driver attached)
pci0: <simple comms> at device 7.0 (no driver attached)
pci0: <simple comms> at device 10.0 (no driver attached)
pcm0: <ESS Technology Maestro-2E> port 0xfc00-0xfcff irq 11 at device 12.0 on pc
i0
setmap (1e4000, 4000), nseg=1, error=0
pcm0: Maestro DMA base: 0x1e4000
pcm0: agg_rdcodec() RW_DONE timed out.
pcm0: agg_rdcodec() PROGLESS timed out.
pcm0: agg_rdcodec() RW_DONE timed out.
pcm0: agg_wrcodec() PROGLESS timed out.
pcm0: agg_rdcodec() PROGLESS timed out.
pcm0: agg_rdcodec() RW_DONE timed out.
pcm0: agg_wrcodec() PROGLESS timed out.
pcm0: agg_rdcodec() PROGLESS timed out.
pcm0: agg_rdcodec() RW_DONE timed out.
pcm0: agg_wrcodec() PROGLESS timed out.
pcm0: agg_rdcodec() PROGLESS timed out.
pcm0: agg_rdcodec() RW_DONE timed out.
pcm0: agg_wrcodec() PROGLESS timed out.
pcm0: agg_rdcodec() PROGLESS timed out.
pcm0: agg_rdcodec() RW_DONE timed out.
pcm0: agg_wrcodec() PROGLESS timed out.
pcm0: agg_rdcodec() PROGLESS timed out.
pcm0: agg_rdcodec() RW_DONE timed out.
pcm0: agg_wrcodec() PROGLESS timed out.
pcm0: agg_rdcodec() PROGLESS timed out.
pcm0: agg_rdcodec() RW_DONE timed out.
pcm0: agg_wrcodec() PROGLESS timed out.
pcm0: agg_rdcodec() PROGLESS timed out.
pcm0: agg_rdcodec() RW_DONE timed out.
pcm0: agg_wrcodec() PROGLESS timed out.
pcm0: agg_rdcodec() PROGLESS timed out.
pcm0: agg_rdcodec() RW_DONE timed out.
pcm0: agg_wrcodec() PROGLESS timed out.
pcm0: agg_rdcodec() PROGLESS timed out.
pcm0: agg_rdcodec() RW_DONE timed out.
pcm0: agg_wrcodec() PROGLESS timed out.
pcm0: <Asahi Kasei AK4540 AC97 Codec (id = 0x414b4d00)>
pcm0: Codec features 0 bit master volume, no 3D Stereo Enhancement
pcm0: agg_rdcodec() PROGLESS timed out.
pcm0: agg_rdcodec() RW_DONE timed out.
pcm0: ac97 codec reports dac not ready
pcm0: agg_wrcodec() PROGLESS timed out.
pcm0: agg_wrcodec() PROGLESS timed out.
setmap (202000, 4000), nseg=1, error=0
pcm0: pch[0].offset = 0x1e000
setmap (206000, 4000), nseg=1, error=0
pcm0: pch[1].offset = 0x22000
setmap (211000, 4000), nseg=1, error=0
pcm0: pch[2].offset = 0x2d000
setmap (222000, 4000), nseg=1, error=0
pcm0: pch[3].offset = 0x3e000
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
fdc0: <NEC 765 or clone> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x241 0x251 0x251 0x251
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0: using extended I/O port range
ppc0: ECP SPP SPP
ppc0 port 0x778-0x77a,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <Option ROMs> at iomem 0xe8000-0xebfff,0xc0000-0xcbfff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x241 0x241 0x241 0x241
sio1: probe failed test(s): 0 1 2 4
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 399923847 Hz quality 800
Timecounters tick every 10.000 msec
IPsec: Initialized Security Association Processing.
lo0: bpf attached
ata1: spurious interrupt - status=0x00 error=0x04
acpi_cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acpi_cmbat0: battery initialization start
acpi_cmbat0: battery initialization done, tried 1 times
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
pccard0: CIS version PC Card Standard 5.0
pccard0: CIS info: SMC, SMC2632W, Version 01.02,
pccard0: Manufacturer code 0x156, product 0x2
pccard0: function 0: network adapter, ccr addr 3e0 mask 1
pccard0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 6, io
space 0-3f; io16 irqpulse irqlevel
wi0: <SMC SMC2632W> at port 0x100-0x13f irq 11 function 0 config 1 on pccard0
wi0: 802.11 address: 00:04:e2:29:3a:b0
wi0: using RF:PRISM2 MAC:HFA3841 CARD:HWB3163 rev.A
wi0: Intersil Firmware: Primary (0.3.0), Station (0.8.3)
wi0: bpf attached
wi0: bpf attached
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wi0: bpf attached
ata0-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata0-master: setting PIO4 on Intel PIIX4 chip
ata0-master: setting UDMA33 on Intel PIIX4 chip
ad0: <IBM-DBCA-206480/BC4OA82F> ATA-4 disk at ata0-master
ad0: 6194MB (12685680 sectors), 13424 C, 15 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
GEOM: new disk ad0
ar: FreeBSD check1 failed
ata1-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin
ata1-master: setting PIO4 on Intel PIIX4 chip
acd0: <TOSHIBA DVD-ROM SD-C2102/1329> DVDROM drive at ata1 as master
acd0: read 3445KB/s (3445KB/s), 128KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR
acd0: Writes:
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/14/63 s:63 l:12685617
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 6495035904 end 6495068159
GEOM: Configure ad0s1a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s1b, start 268435456 length 268435456 end 536870911
GEOM: Configure ad0s1c, start 0 length 6495035904 end 6495035903
GEOM: Configure ad0s1d, start 536870912 length 5958164992 end 6495035903
Mounting root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xffe0-0xffff irq 11 at de
vice 5.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040301170232.GA19761>