Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 8 Jan 1999 10:36:57 -0800 (PST)
From:      Matthew Jacob <mjacob@feral.com>
To:        Scot Elliott <scot@london.virgin.net>
Cc:        freebsd-alpha@FreeBSD.ORG
Subject:   Re: horrible hack / SRM console
Message-ID:  <Pine.LNX.4.04.9901081035450.2496-100000@feral-gw>
In-Reply-To: <Pine.SOL.4.05.9901081832000.6575-100000@kirk.london.virgin.net>

next in thread | previous in thread | raw e-mail | index | archive | help

This is a perennial problem. At some point *BSD is going to have to
consider how to work under ARC or AlphaBIOS. Probably we'll have to do
something akin to MILO.


On Fri, 8 Jan 1999, Scot Elliott wrote:

> On the same subject, I'd like to run FreeBSD Alpha on a machine with a
> 164SX board.  It's currently got the NT console installed - and I can't
> get firmware updated from DEC to work.  The machine just hangs after a
> minute or so of accessing the floppy disk for the image.
> 
> Does this mean that I have to get hold of a firwmare chip with the SRM
> on it - and if so, does anyone know of any UK suppliers, as even DEC don't
> know what I'm talking about when I call them...
> 
> 
> Thanks.
> 
> Scot.
> 
> 
> 
> On Fri, 8 Jan 1999, Wilko Bulte wrote:
> 
> > As wilko wrote...
> > 
> > > As Aspen Tech support refered me to Aspen Tech sales for a SRM ROM
> > > and Aspen Tech sales does not seem to read email I decided to bluntly 
> > > dump an EB64plus SRM console ROM into the Aspen Alpine board.
> > > 
> > > Surprise: seems to work.. The Alpine does not have an ethernet i/f onboard,
> > > the EB64+ does (it seems, I've never seen one in real life) but the SRM
> > > does not seem to care too much. Digital Unix collapses with a panic
> > > though.. when I try to boot an install CD.
> > 
> > You'd expect I know better after years of hardware hacking but: there was
> > a memory jumper set wrong. The board correctly told me it had 64Mb, but it
> > was set for a single bank 4x16Mb instead of for a dual bank 2x4x8Mb.
> > 
> > Both Dunix and NetBSD stopped crashing after the board was setup correctly
> > 8-)
> > 
> > I plan to port the NetBSD EB64+ specific bits to FreeBSD/axp (hopefully
> > soon..)
> > 
> > Wilko
> > _     ______________________________________________________________________
> >  |   / o / /  _  Bulte 				  email: wilko@yedi.iaf.nl 
> >  |/|/ / / /( (_) Arnhem, The Netherlands          WWW  : http://www.tcja.nl
> > ______________________________________________ Powered by FreeBSD __________
> > 
> > To Unsubscribe: send mail to majordomo@FreeBSD.org
> > with "unsubscribe freebsd-alpha" in the body of the message
> > 
> 
> -----------------------------------------------------------------------------
> Scot Elliott	                                Mobile: +44 (0)7050 126045
> Work:   scot@london.virgin.net		                +44 (0)171 479 4482
> Play:   scot@poptart.org, scot@indiekid.co.uk, s@cx     +44 (0)181 896 1019
> -----------------------------------------------------------------------------
> Public key available at:   http://www.poptart.org/pgpkey.html
> Fingerprint: FCAE9ED3A234FEB59F8C7F9DDD112D
> 
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-alpha" in the body of the message
> 


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-alpha" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.04.9901081035450.2496-100000>