Date: Sun, 23 Sep 2001 22:38:26 +0200 From: Guido van Rooij <guido@gvr.org> To: Warner Losh <imp@harmony.village.org> Cc: mobile@freebsd.org Subject: Re: To those reboot hang sufferers Message-ID: <20010923223826.A13938@gvr.gvr.org> In-Reply-To: <200109231802.f8NI2t749248@harmony.village.org>; from imp@harmony.village.org on Sun, Sep 23, 2001 at 12:02:55PM -0600 References: <200109231802.f8NI2t749248@harmony.village.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--7JfCtLOvnd9MIVvH
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
On Sun, Sep 23, 2001 at 12:02:55PM -0600, Warner Losh wrote:
>
> If you get a hang on reboot after the Uptime message, I have a
> question for you:
> Are you using polling mode?
I get a hang on reboot. Rocksolid. Have to remove the battery.
I do not use polling mode (I believe that is when it report irq 0).
It hangs when I never even inserted a card in the notebook.
The system is fresh installed on a blank drive btw (with another kernel
config but nothing funky)
Inserting a card (e.g. my orinoco wireless) works fine, also removing it.
Attached my dmesg.
-Guido
--7JfCtLOvnd9MIVvH
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=dmesg
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.4-RELEASE #2: Sun Sep 23 21:48:01 CEST 2001
root@mouse.gvr.org:/usr/src/sys/compile/MOUSE
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (364.74-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x66a Stepping = 10
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134152192 (131008K bytes)
avail memory = 126828544 (123856K bytes)
Preloaded elf kernel "kernel" at 0xc03bb000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00fdf50
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard
pci0: <PCI bus> on pcib0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xfcc0-0xfcff mem 0xfed00000-0xfedfffff,0xfecff000-0xfecfffff irq 9 at device 6.0 on pci0
fxp0: Ethernet address 08:00:46:04:4a:83
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcb0-0xfcbf at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfc60-0xfc7f irq 9 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x2180-0x218f at device 7.3 on pci0
pci0: <NeoMagic MagicMedia 256AV SVGA controller> at 8.0 irq 9
pcm0: <NeoMagic 256AV> mem 0xfea00000-0xfeafffff,0xfe000000-0xfe3fffff irq 9 at device 8.1 on pci0
chip2: <Sony CXD1847A FireWire Host Controller> at device 9.0 on pci0
pci_cfgintr_linked: linked (61) to hard-routed irq 9
pci_cfgintr: 0:10 INTA routed to irq 9
pcic0: <Ricoh RL5C475 PCI-CardBus Bridge> irq 9 at device 10.0 on pci0
pcic0: PCI Memory allocated: 0x44000000
pccard0: <PC Card bus (classic)> on pcic0
pci0: <unknown card> (vendor=0x127a, dev=0x2005) at 11.0
orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xdc000-0xdffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ad0: 19077MB <IBM-DJSA-220> [38760/16/63] at ata0-master UDMA33
ad2: 3MB <MEMORYSTICK 4M 8K> [247/2/16] at ata1-master PIO1
Mounting root from ufs:/dev/ad0s2a
--7JfCtLOvnd9MIVvH--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010923223826.A13938>