Date: Sat, 29 Oct 2022 18:39:03 +0200 From: Andrea Venturoli <ml@netfence.it> To: "Bjoern A. Zeeb" <bz@FreeBSD.org> Cc: "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org> Subject: Re: New laptop: AC 9461/9560: iwm or iwlwifi? Message-ID: <a04c03db-3c0c-037b-3a81-221e6abd2151@netfence.it> In-Reply-To: <srp28qr-1p8r-qsp7-6197-67359o129r35@mnoonqbm.arg> References: <2e3618b7-646b-02be-eb19-8a58aaf3619f@netfence.it> <srp28qr-1p8r-qsp7-6197-67359o129r35@mnoonqbm.arg>
next in thread | previous in thread | raw e-mail | index | archive | help
On 10/28/22 14:58, Bjoern A. Zeeb wrote: Hello. > That is also not good but something I can help with working on. Thanks in advance, then :) > You should go to stable/13 (or main). Done (stable/13 from yesterday). Now it seems to work, at least in a basic case... with time I'll see about stability, connecting to other access points, integrating it in LAGG with a wired interface, ecc... > Could you please > share the full iwlwifi parts from a bootverbose, as this is peculiar > case I haven't had much feedback on in the last year. FYI: grep -E "iwl|wlan" /var/log/all.log | grep -v ipfw > Oct 29 18:12:36 hector kernel: wlan0: link state changed to DOWN > Oct 29 18:12:36 hector kernel: wlan: <802.11 Link Layer> > Oct 29 18:12:36 hector kernel: Autoloading module: if_iwlwifi > Oct 29 18:12:36 hector kernel: iwlwifi0: <iwlwifi> mem 0x91118000-0x9111bfff at device 12.0 on pci0 > Oct 29 18:12:36 hector kernel: iwlwifi0: attempting to allocate 6 MSI-X vectors (16 supported) > Oct 29 18:12:36 hector kernel: iwlwifi0: using IRQs 131-136 for MSI-X > Oct 29 18:12:36 hector kernel: firmware: 'iwlwifi-9000-pu-b0-jf-b0-46.ucode' version 46: 1518788 bytes loaded at 0xffffffff8238e000 > Oct 29 18:12:36 hector kernel: iwlwifi0: successfully loaded firmware image 'iwlwifi-9000-pu-b0-jf-b0-46.ucode' > Oct 29 18:12:36 hector kernel: iwlwifi0: WRT: Overriding region id 0 > Oct 29 18:12:36 hector kernel: iwlwifi0: WRT: Overriding region id 1 > Oct 29 18:12:36 hector kernel: iwlwifi0: WRT: Overriding region id 2 > Oct 29 18:12:36 hector kernel: iwlwifi0: WRT: Overriding region id 3 > Oct 29 18:12:36 hector kernel: iwlwifi0: WRT: Overriding region id 4 > Oct 29 18:12:36 hector kernel: iwlwifi0: WRT: Overriding region id 6 > Oct 29 18:12:36 hector kernel: iwlwifi0: WRT: Overriding region id 8 > Oct 29 18:12:36 hector kernel: iwlwifi0: WRT: Overriding region id 9 > Oct 29 18:12:36 hector kernel: iwlwifi0: WRT: Overriding region id 10 > Oct 29 18:12:36 hector kernel: iwlwifi0: WRT: Overriding region id 11 > Oct 29 18:12:36 hector kernel: iwlwifi0: WRT: Overriding region id 15 > Oct 29 18:12:36 hector kernel: iwlwifi0: WRT: Overriding region id 16 > Oct 29 18:12:36 hector kernel: iwlwifi0: WRT: Overriding region id 18 > Oct 29 18:12:36 hector kernel: iwlwifi0: WRT: Overriding region id 19 > Oct 29 18:12:36 hector kernel: iwlwifi0: WRT: Overriding region id 20 > Oct 29 18:12:36 hector kernel: iwlwifi0: WRT: Overriding region id 21 > Oct 29 18:12:36 hector kernel: iwlwifi0: WRT: Overriding region id 28 > Oct 29 18:12:36 hector kernel: iwl-debug-yoyo.bin: could not load firmware image, error 2 > Oct 29 18:12:36 hector kernel: iwl-debug-yoyo_bin: could not load firmware image, error 2 > Oct 29 18:12:36 hector kernel: iwl_debug_yoyo_bin: could not load firmware image, error 2 > Oct 29 18:12:36 hector kernel: iwlwifi0: loaded firmware version 46.9d0122c0.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm > Oct 29 18:12:36 hector kernel: iwlwifi0: Detected Intel(R) Wireless-AC 9461, REV=0x312 > Oct 29 18:12:36 hector kernel: iwlwifi0: base HW address: 20:1e:88:78:ac:3a, OTP minor version: 0x4 > Oct 29 18:12:36 hector kernel: iwlwifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps > Oct 29 18:12:36 hector kernel: iwlwifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps > Oct 29 18:12:36 hector kernel: iwlwifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps > Oct 29 18:12:36 hector kernel: iwlwifi0: Conflict between TLV & NVM regarding enabling LAR (TLV = enabled NVM =disabled) > Oct 29 18:12:36 hector kernel: wlan0: bpf attached > Oct 29 18:12:36 hector kernel: wlan0: Ethernet address: 20:1e:88:78:ac:3a > Oct 29 18:12:36 hector kernel: Created wlan(4) interfaces: wlan0. > Oct 29 18:12:36 hector kernel: wlan0: no link ..... > Oct 29 18:12:36 hector kernel: wlan0: link state changed to UP > Oct 29 18:12:36 hector kernel: DHCPREQUEST on wlan0 to 255.255.255.255 port 67 > Oct 29 18:12:36 hector kernel: Starting Network: lo0 wlan0. > Oct 29 18:12:36 hector kernel: wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > Oct 29 18:12:36 hector kernel: groups: wlan > Oct 29 18:12:36 hector kernel: parent interface: iwlwifi0 Feel free to ask for anything else! bye & Thanks av. P.S. I guess this card should be able to reach higher speeds... I take it that the driver currently can't. Fine for me. Of course I'll be happy if it will in the future, but at least it works and it's enough.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?a04c03db-3c0c-037b-3a81-221e6abd2151>