Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 26 May 1999 23:29:40 +1000 (EST)
From:      Dale Richardson <dale@cs.jcu.edu.au>
To:        freebsd-smp@freebsd.org
Subject:   My SMP box has stopped working (3.1-Release)
Message-ID:  <199905261329.XAA02569@reef.cs.jcu.edu.au>

next in thread | raw e-mail | index | archive | help

Hi folks,
	A year ago I played around abit with SMP on freebsd and was
impressed. Then my HD died and I didn't get around to re-installing FreeBSD
until last week. Now I cannot seem to get SMP working again.

Box is a Dual LX chipset board with 2xPII 300 and 64 MB RAM.

At first I thought I may had blown a CPU, because I havn't used both for a
while, but then I swapped the CPU's around and still got the same response.

dmesg output:

Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California. All rights reserved.
FreeBSD 3.1-RELEASE #0: Mon May 17 22:19:59 EST 1999
    root@myname.my.domain:/usr/src/sys/compile/SMP
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium II (686-class CPU)
  Origin = "GenuineIntel"  Id = 0x634  Stepping=4

Features=0x80fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,MMX>
real memory  = 67108864 (65536K bytes)
avail memory = 62173184 (60716K bytes)
Programming 24 pins in IOAPIC #0
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  0, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00170011, at 0xfec00000
Bad DMI table checksum!
Preloaded elf kernel "kernel" at 0xf02f3000.
Probing for devices on PCI bus 0:
chip0: <Host to PCI bridge (vendor=8086 device=7180)> rev 0x03 on pci0.0.0
chip1: <PCI to PCI bridge (vendor=8086 device=7181)> rev 0x03 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x01 on pci0.7.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1
chip3: <Intel 82371AB Power management controller> rev 0x01 on pci0.7.3
vga0: <S3 ViRGE graphics accelerator> rev 0x06 int a irq 2 on pci0.9.0
Probing for devices on PCI bus 1:
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
fe0 not found at 0x300
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 not found
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <ST32531A>
wd0: 2439MB (4995648 sectors), 4956 cyls, 16 heads, 63 S/T, 512 B/S
wdc0: unit 1 (wd1): <QUANTUM FIREBALL EX3.2A>
wd1: 3079MB (6306048 sectors), 6256 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <CREATIVECD3220E/1.02>, removable, accel, dma, iordis
<snip>...
APIC_IO: routing 8254 via pin 2

An help anyone could give would be greately appreciated.

TIA,
Dale
dale@cs.jcu.edu.au


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-smp" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199905261329.XAA02569>